User Manual for miDiPLUS models including: X4 III, X6 III, X8 III, Mini USB MIDI Keyboard Controller
device. 11. Do not expose the device to hot sunlight. 12. Do not use the device when there is a gas leak nearby. 3X III Series User Manual 1. Overview 1.1 The Top Panel 1.2 The Rear Panel 1 2 5 6 7 3 4 8 1 2 3 4 ① X knob
File Info : application/pdf, 28 Pages, 6.40MB
DocumentDocumentSERIES USERMANUAL MIDIPLUS Contents Introduction ............................................................................................................................................................................. 2 Important Notes: .................................................................................................................................................................... 2 1. Overview .............................................................................................................................................................................. 3 1.1 The Top Panel...................................................................................................................................................................................3 1.2 The Rear Panel ................................................................................................................................................................................ 3 2. Guide .................................................................................................................................................................................... 4 2.1 Ready to use....................................................................................................................................................................................4 2.2 X Knob ................................................................................................................................................................................................5 2.3 Transpose and Octave ................................................................................................................................................................5 2.4 Pitch and Modulation ................................................................................................................................................................... 5 2.5 Knobs .................................................................................................................................................................................................. 6 2.6 Transport Buttons.............................................................................................................................................................................6 2.7 Keyboard ........................................................................................................................................................................................... 7 3. Setting Mode ...................................................................................................................................................................... 7 3.1 Changing The X Knob Mode .................................................................................................................................................... 7 3.2 Changing The Transport Buttons Mode................................................................................................................................. 8 3.3 Changing The Keyboard Velocity Curve..............................................................................................................................8 3.4 Changing The Bank MSB.............................................................................................................................................................8 3.5 Changing The Bank LSB ............................................................................................................................................................... 8 3.6 Selecting a Smart Scale..............................................................................................................................................................9 3.7 Changing The CC Number ....................................................................................................................................................... 9 3.7.1 Changing The Knobs'CC Number.................................................................................................................................9 3.7.2 Changing The Buttons'CC Number...............................................................................................................................9 3.7.3 Changing The Mod Touch Strip's CC Number .......................................................................................................10 3.8 Changing The Controller Channel .......................................................................................................................................10 3.9 Changing The MIDI Channel ..................................................................................................................................................10 4. Factory Reset ....................................................................................................................................................................10 5. DAW Settings ..................................................................................................................................................................... 11 5.1 Steinberg Cubase/Nuendo (Mackie Control) ..................................................................................................................11 5.2 FL Studio (Mackie Control)........................................................................................................................................................13 5.3 Studio One (Mackie Control)...................................................................................................................................................14 5.4 Pro Tools (HUI) .................................................................................................................................................................................16 5.5 Logic Pro X (Mackie Control) ...................................................................................................................................................17 5.6 Reaper (Mackie Control)...........................................................................................................................................................18 5.7 CakeWalk Sonar (Mackie Control) ........................................................................................................................................20 5.8 Bitwig (Mackie Control) ..............................................................................................................................................................22 6. Appendix............................................................................................................................................................................24 6.1 Specifications ................................................................................................................................................................................24 6.2 Screen display and functional interpretation...................................................................................................................24 6.3 Scales................................................................................................................................................................................................25 6.4 MIDI CC List.....................................................................................................................................................................................26 X III Series User Manual 1 Introduction Thank you for purchsing the 3rd generation X series MIDI keyboard. They are available in three models: X4 III, X6 III, and X8 III. They all features full size keyboard with velocity sensitive, 4 knobs, 6 buttons, Pitch and Modulation touch strips. Build in 16 Smart scales included Chinese pentatonic, Jananese scale, Blues scale etc.. Also supports Mackie Control and HUI protocols, provides you with a better use experience. Important Notes: Please read the following precautions carefully before use to avoid damaging the equipment or causing personal injury. Precautions include but are not limited to the following: 1. Read and understand all the illustrations. 2. Always follow the instructions on the device. 3. Before cleaning the device, always remove the batteries and the USB cable. When cleaning, use a soft and dry cloth. Do not use gasoline, alcohol, acetone, turpentine or any other organic solutions; do not use a liquid cleaner, spray or cloth that's too wet. 4. Disconnect the USB cable and remove the batteries if not used for extended periods. 5. Do not use the device near water or moisture, such as a bathtub, sink, swimming pool or similar place. 6. Do not place the device in an unstable position where it might accidentally fall over. 7. Do not place heavy objects on the device. 8. Do not place the device near a heat vent at any location with poor air circulation. 9. Do not open or insert anything into the device that may cause a fire or electrical shock. 10. Do not spill any kind of liquid onto the device. 11. Do not expose the device to hot sunlight. 12. Do not use the device when there is a gas leak nearby. X III Series User Manual 2 1. Overview 1.1 The Top Panel 3 4 1 2 5 6 8 7 X knob: Control DAW and software instrument parameters or setting the keyboard parameters. Display: Provides real time feedback of control information. Knobs: Control DAW or software instrument parameters. Transport buttons: Control the transport of DAW. Transpose button: Activate keyboard's semitone control Octave buttons: Activate keyboard's octave control. Pitch & Modulation touch strips: Control the pitch bend and modulation parameters of your sound. Keyboard: Trigger notes on/off, also can be used as shortcuts to access edit more parameters. 1.2 The Rear Panel 1 2 3 4 MIDI OUT: Connect to MIDI device or modular USB: Connect to your computer, this port provides both power and MIDI data SUS: Connect to a sustain pedal EXP: Connect to a expression pedal X III Series User Manual 3 2. Guide 2.1 Ready to use Use with computer: Connect X III to your PC or Mac using the included USB cable. Power is also supplied through this connection. X III is a class-compliant USB device, so its drivers are automatically installed when connecting to a computer. Use with MIDIPLUS miniEngine series sound engine: Connect X III to the USB Host of miniEngine using the included USB cable, connect your speaker or headphone to miniEngine and turn on the miniEngine. DC5V Use with external MIDI device: Connect to a USB 5V power adapter using the included USB cable, connect the MIDI OUT of X III to MIDI IN of external MIDI device with a 5 pin MIDI cable. X III Series User Manual 4 2.2 X Knob The X knob has two working mode, power on defaults to normal mode, press it about 0.5 seconds to switch to setting mode, the relevant parameter options of the keyboard can be set in this mode, for more detailes, please refer to 3. Setting Mode. Normal Mode: Turn the X knob to send Program Change(default) or CC7 message, this option can be changed by Setting Mode. Setting Mode: Turn the X knob to select options, press to confirm, press about 0.5 seconds to exit the setting mode. 2.3 Transpose and Octave Pressing the or button to shift the octave range of keyboard, when activated, the selected octave button will light up, pressing the and buttons simultaneously will quickly reset the octave shift. Press and hold the TRANS button, then pressing the or button to transpose, when activated, the TRANS button will light up, and this can be toggled on and off by pressing the TRANS button, when off, the TRANS button backlit will dimmer, the previously used transpose setting will be stored while the unit remains powered. 2.4 Pitch and Modulation Two capacitive touch strips allow for real-time pitch bend and modulation control. The LED light strips will reflect the current status of each controller. Sliding up or down on the Pitch touch strip will raise or lower the pitch of the selected tone. The range of this effect is set within the hardware or software instrument being controlled. X III Series User Manual 5 Sliding up on the Modulation touch strip increases the amount of modulation on the selected tone. The response depends on the settings of the instrument being controlled. Certain instruments or presets will not use the modulation parameter. 2.5 Knobs X III has 4 assignable knobs with backlit, the default control functions of each knob are as follows: Knob Purpose MIDI CC Number K1 Chorus Send Level CC93 K2 Reverb Send Level CC91 K3 Timbre/Harmonic CC71 K4 Brightness CC74 You can assign any MIDI CC (continuous controller) number to each knob in Setting Mode. Please refer to 3.7.1 Changing The Knobs CC Number for detailed operation steps. 2.6 Transport Buttons · B1 B2 B3 B4 BS B6 X III has 6 buttons with three mode: MCU(default), HUI and CC mode, you can change this in Setting Mode. Please refer to 3.2 Changing The Transport Buttons Mode for detailed operation steps. In MCU and HUI mode, these buttons controls the transport of DAWs, and control the in CC modeplease refer to 5. DAW Settings for detailed operation steps: Button Purpose MIDI CC Number B1 Undefined CC25 B2 Undefined CC26 B3 Undefined CC27 B4 Undefined CC28 B5 Undefined CC29 B6 Undefined CC30 Any MIDI CC number can be assigned to each button in Setting Mode, please refer to 3.7.2 Changing The Buttons'CC Number for detailed operation steps. X III Series User Manual 6 2.7 Keyboard X III features 49, 61 or 88 velocity sensitive keys for playing and sending note on/off messages. These keys also can be used as shortcuts to set controllers, MIDI channel in Setting Mode, for details, please refer to 3. Setting Mode. When in Setting Mode, the keys with labeled functions will be used as shortcuts to access the parameters, the labeled keys as follow: X MODE: Changing the X knob mode, select between Program Change (default) or CC mode. BTN MODE: Changing the Transport button mode, select between Mackie Control (default), HUI and CC mode. VEL.: Setting the keyboard velocity sensitive curve, select between Normal (default), Fixed, Light and Hard. MSB: Setting the controller number for "Most Significant Byte" (ie, MSB) of Bank Select. This message has a range between 0 and 127. The default is 0. LSB: Setting the controller number for "Least Significant Byte" (ie, LSB) of Bank Select. This message has a range between 0 and 127. The default is 0. SCALE: Selecting the build in Smart Scale, when a scale is selected, the scale notes will be mapped on the white keys, for details, please refer to 6.3 Scales, the default is Off. ASSIGN CC: Setting the CC Number of each controller, including Mod touch strip, 4 knobs and 6 buttons, the range between 0 and 127. ASSIGN CH: Setting the MIDI Channel of each controller, including Mod touch strip, 4 knobs and 6 buttons, the range between 0 and 16, the default is 0. MIDI CHANNELS: Setting the MIDI Channel of keyboard, the range between 1 and 16, the default is 1. 3. Setting Mode In the Setting Mode, you can set your keyboard easily. Long press the X knob about 0.5 second, the screen will display "SEL" when enter the Setting Mode. 3.1 Changing The X Knob Mode Long press the X knob about 0.5 second, when the screen display "SEL", then follow these steps: 1. Press the key labeled "X MODE", the screen will display the currently selected mode, 2. Turn the X knob to select Program Change or CC mode (the screen will display "PC" or "cC"), 3. Press the X knob to confirm, the screen will display you just selected mode, Now you can press the other keys labeled functions to set other parameters, or long press the X knob to exit the Setting Mode. X III Series User Manual 7 3.2 Changing The Transport Buttons Mode · B1 B2 B3 B4 BS B6 When the screen display "SEL", follow these steps: 1. Press the key labeled "BTN MODE", the screen will display the currently selected mode, 2. Turn the X knob to select Mackie Control, HUI or CC mode (the screen will display "MCU", "hui" or "cC"), 3. Press the X knob to confirm, the screen will display you just selected mode, Now you can press the other keys labeled functions to set other parameters, or long press the X knob to exit the Setting Mode. 3.3 Changing The Keyboard Velocity Curve When the screen display "SEL", follow these steps: 1. Press the key labeled "VEL.", the screen will display the currently selected velocity curve, 2. Turn the X knob to select Normal, Fixed, Light or Hard (the screen will display "nor", "fix", "lig" or "har"), 3. Press the X knob to confirm, the screen will display you just selected velocity curve, Now you can press the other keys labeled functions to set other parameters, or long press the X knob to exit the Setting Mode. 3.4 Changing The Bank MSB When the screen display "SEL", follow these steps: 1. Press the key labeled "MSB", the screen will display the currently value, 2. Turn the X knob to set the controller number between 0 and 127, 3. Press the X knob to confirm, the screen will display you just selected controller number, Now you can press the other keys labeled functions to set other parameters, or long press the X knob to exit the Setting Mode. 3.5 Changing The Bank LSB When the screen display "SEL", follow these steps: X III Series User Manual 8 1. Press the key labeled "LSB", the screen will display the currently value, 2. Turn the X knob to set the controller number between 0 and 127, 3. Press the X knob to confirm, the screen will display you just selected controller number, Now you can press the other keys labeled functions to set other parameters, or long press the X knob to exit the Setting Mode. 3.6 Selecting a Smart Scale When the screen display "SEL", follow these steps: 1. Press the key labeled "SCALE", the screen will display the currently scale, 2. Turn the X knob to select a scale, 3. Press the X knob to confirm, the screen will display you just selected scale name. 3.7 Changing The CC Number The controllers of X III can be assigned to any CC Number as you like, please refer to 6.4 MIDI CC List for details. These controllers included: Mod touch strip, 4 knobs and 6 buttons, the range between 0 and 127. 3.7.1 Changing The Knobs'CC Number When the screen display "SEL", follow these steps: 1. Press the key labeled "ASSIGN CC", the screen will display the CC number of the last use controller, 2. Turn the knob you want to assign, K1 for instance, the screen displays "93", 3. Turn the X knob to select a CC number, select "52" for instance, 4. Press the X knob to confirm, the screen displays "93", 5. Long press the X knob to exit the Setting Mode. Now the CC number of K1 knob is assigned to CC52 successfully. 3.7.2 Changing The Buttons'CC Number When the screen display "SEL", follow these steps: 1. Press the key labeled "ASSIGN CC", the screen will display the CC number of the last use controller, 2. Press the button you want to assign, B2 for instance, the screen displays "26", 3. Turn the X knob to select a CC number, select "53" for instance, 4. Press the X knob to confirm, the screen displays "53" you just selected number. 5. Long press the X knob to exit the Setting Mode. Now the CC number of B2 button is assigned to CC53 successfully. Then you should change the button X III Series User Manual 9 into CC mode refer to 3.2 Changing the Transport Buttons Mode. 3.7.3 Changing The Mod Touch Strip's CC Number When the screen display "SEL", follow these steps: 1. Press the key labeled "ASSIGN CC", the screen will display the CC number of the last use controller, 2. Touch the MOD touch strip, the screen displays "1", 3. Turn the X knob to select a CC number, select "54" for instance, 4. Press the X knob to confirm, the screen displays "54", 5. Long press the X knob to exit the Setting Mode. Now the CC number of MOD touch strip is assigned to CC54 successfully. 3.8 Changing The Controller Channel When the screen display "SEL", follow these steps: 1. Press the key labeled "ASSIGN CH", the screen will display the channel of the last use controller, 2. Select the controller you want to assign, MOD touch strip or one of Knobs and Buttons, 3. Turn the X knob to select a Channel, select "10" for instance, 4. Press the X knob to confirm, the screen displays "10" you just selected number. 5. Long press the X knob to exit the Setting Mode. Now the channel of the controller you selected in step 2 is assigned to Channel 10 successfully. Note: When the controller channel is selected to 00, the controller channel will follow the keyboard channel, ie if the keyboard channel was selected to channel 2, then the controller events will be sent to channel 2 as well. 3.9 Changing The MIDI Channel Long press the X knob about 0.5 second, when the screen display "SEL", press the corresponding note on the keyboard below the MIDI channels you wish to select. 10 for instance, the screen will displays "10", and the keyboard will exit the Setting Mode, the MIDI Channel is changed to channel 10 successfully. 4. Factory Reset At some point you may wish to reset your device back to factory settings. To perform a factory reset on your X III, please follow these steps: 1. Disconnect the USB cable, X III Series User Manual 10 2. Press and hold the "B1" and "B2" buttons, 3. Plug in the USB cable, 4. Release the "B1" and "B2" buttons when the screen displays "rEs". Note: Performing a factory reset will clear all your changes to the keyboard. Please operates carefully. 5. DAW Settings X III has 6 buttons with three mode: Mackie Control(default), HUI and CC mode, they can be controls the transport of most popular DAWs. And most of DAWs can be used Mackie Control mode except Pro Tools, you need to change the buttons into HUI mode, please refer to 3.2 Changing the Transport Buttons Mode. 5.1 Steinberg Cubase/Nuendo (Mackie Control) 1. Go to menu: Studio > Studio Setup... 2. Click on the Add Device X III Series User Manual 11 3. Select the Mackie Control from the pop-up list 4. In the Mackie Control window, set the MIDI Input as MIDIIN2(X6III) and the MIDI Output as MIDIOUT2(X6III) 5. Click on the MIDI Port Setup X III Series User Manual 12 6. In the right side of the window, find the MIDIIN2(X6III), then uncheck the "In `All MIDI" 7. Click on OK to finish setup 5.2 FL Studio (Mackie Control) 1. Go to menu: Options > MIDI settings (keyboard shortcut F10) 2. In the Input tab, find and Enable both X6III and MIDIIIN2(X6III), set the Controller type of MIDIIIN2(X6III) as Mackie Control Universal, Port 1 X III Series User Manual 13 3. In the Output tab, find X6III and MIDIIIN2(X6III), then and check the Send master sync, set the Port of MIDIIIN2(X6III) to Port 1, close the window to finish setup. 5.3 Studio One (Mackie Control) 1. Go to menu: Studio One > Options...(keyboard shortcut: Ctrl+,) 2. Select the External Devices X III Series User Manual 14 3. Then click on Add... 4. Select New Keyboard 5. Set both Receive From and Send To as X6III 6. Click on OK to finish this part 7. Select another External Devices X III Series User Manual 15 8. And click on Add... 8. Find the Mackie folder in the list and select Control, set both Receive From and Send To as MIDIIN2(X6III), then click OK to finish setup. 5.4 Pro Tools (HUI) 1. Change the transport buttons into HUI mode refer to 3.2 Changing The Transport Buttons Mode. 2. Go to menu: Setup > Peripherals... X III Series User Manual 16 3. In the pop-up window, click the MIDI Controllers tab, find the #1 row, select HUI in the pop-up list of Type, select MIDIIN2(X6III) both in the pop-up list of the Receive From and Send To, then close the Peripherals window to finish setup. 5.5 Logic Pro X (Mackie Control) 1. Go to menu: Control Surfaces > Setup... 2. In the Control Surface Setup window, click on New, select Install from the pop-up list, 3. In the Install window, select Mackie Control, then click on Add X III Series User Manual 17 4. In the Control Surface Setup window, find the Device: Mackie Control, set the Output Port and Input Port as X III port 2, close the window to finish setup. 5.6 Reaper (Mackie Control) 1. Go to menu: Options > Preferences... (keyboard shortcut: Ctrl+P) X III Series User Manual 18 2. In the Preferences window, click the MIDI Devices tab, find and right click on the the X6III from the Device list, select Enable input, 3. In the Preferences window, click on the Control/OSC/web tab, then click Add 4. In the Control Surface Settings window, select Frontier Tranzport from the pop-up list of Control surface mode, select MIDIIN2 from the pop-up list of MIDI input, select MIDIOUT2 from the pop-up list of MIDI output. 5. Click on OK to finish setup. X III Series User Manual 19 5.7 CakeWalk Sonar (Mackie Control) 1. Go to menu: Edit > Preferences... 2. In the Preferences window, click Devices tab, then check the X6III and MIDIIN2(X6III) from the Friendly Name of the Inputs, 3. In the Preferences window, click Control Surfaces tab, then click the Add icon as picture below, X III Series User Manual 20 4. In the Controller/Surface Settings window, select Mackie Control from the pop-up list of Controller/Surface, then click the MIDI Devices... button, 5. In the MIDI Devices window, check the X6III and MIDIIN2(X6III) from the Friendly Name of the Inputs, and also check the X6III and MIDIOUT2(X6III) from the Friendly Name of the Outputs, then click on OK, 6. In the Controller/Surface Settings window, select MIDIIN2(X6III) from the pop-up list of Input Port, select MIDIOUT2(X6III) from the pop-up list of Output Port,then click on the OK button, X III Series User Manual 21 7. Go to menu: Utilities > Mackie Control - 1 8. In the pop-up window, find and check the Disable handshake from the Options box, close the window to finish setup. 5.8 Bitwig (Mackie Control) 1. Open Bitwig, click on SETTINGS tab in dashboard, then select Controllers tab, click on Add Controller, X III Series User Manual 22 2. In the Add Controller window, select Generic from the pop-up list of Harware Vedor, select MIDI Keyboard under the Product box, then click on Add, 3. In the General MIDI Keyboard window, select X8III as Input port, 4. Repeat step 1 to add a controller, in the Add Controller window, select Mackie from the pop-up list of Harware Vedor, select MCU PRO under the Product box, then click on Add, 5. In the Mackie MCU PRO window, select MIDIIN2(X8III) as Input port,and select MIDIOUT2(X8III) as Output port, close the window to finish setup. X III Series User Manual 23 6. Appendix 6.1 Specifications Product Name Keyboard Maximum Polyphony Screen Buttons Knobs Connectors Dimensions Net Weight X III 49/61/88 notes keyboard with velocity sensitive 64 Nixie tube 2 Octave buttons, 1 Transpose button and 6 Transport buttons 1 Clickable encoder and 4 knobs USB port, MIDI OUT, Sustain pedal input, and Expression pedal Input X4 III: 782 x 193 x 87mm X6 III: 947 x 193 x 87mm X8 III: 1325 x 193 x 87mm X4 III: 3.5kg X6 III: 4.0kg X8 III: 5.6kg 6.2 Screen display and functional interpretation Display C01 SEL MCU Hui Cc PC nor Fix LIG Har Res Description MIDI Channel 1 In the Setting Mode Mackie Control mode HUI mode CC mode Program Change mode The Normal velocity curve of keyboard The Fixed velocity curve of keyboard The Light velocity curve of keyboard The Hard velocity curve of keyboard Factory resetting X III Series User Manual 24 6.3 Scales Display off cn1 cn2 jp1 jp2 bl1 bl2 Beb Wht mea Dor lyd ham Min phy Hum egy Scale - China 1 China 2 Japan 1 Japan 2 Blues 1 Blues 2 BeBop Whole Tone Middle East Dorian Lydian Harmonic Minor Minor Phrygian Hungarian Minor Egypt Degree Formula - C, D, E, G, A C, bE, F, G, bB C, bD, F, G, bB C, D, bE, G, bA C, bE, F, #F, G, bB C, D, bE, E, G, A C, D, E, F, G, A, bB, B C, D, E, #F, #G, bB C, bD, E, F, G, bA, B C, D, bE, F, G, A, bB C, D, E, #F, G, A, B C, D, bE, F, G, bA, B C, D, bE, F, G, bA, bB C, bD, bE, F, G, bA, bB C, D, bE, #F, G, bA, B C, bD, bE, E, G, bA, bB X III Series User Manual 25 6.4 MIDI CC List CC Number 0 1 2 3 4 5 6 7 8 9 10 11 12 ~ 13 14 ~ 15 16 ~ 19 20 ~ 31 32 33 34 35 36 37 38 39 40 41 42 43 44 ~ 45 46 ~ 47 49 ~ 52 53 ~ 63 64 65 Purpose Bank Select MSB Modulation Breath Controller Undefined Foot Controller Portamento Time Data Entry MSB Main Volume Balance Undefined Pan Expression Controller Effect Controller 1 ~ 2 Undefined General Purpose Controller 1 ~ 4 Undefined Bank Select LSB Modulation LSB Breath Controller LSB Undefined Foot Controller LSB Portamento LSB Data Entry LSB Main Volume LSB Balance LSB Undefined Pan LSB Expression Controller LSB Effect Controller LSB 1 ~ 2 Undefined General Purpose Controller LSB 1 ~ 4 Undefined Sustain Portamento On/Off CC Number 66 67 68 69 70 71 72 73 74 75 ~ 79 80 ~ 83 84 85 ~ 90 91 92 93 94 95 96 97 98 99 100 101 102 ~ 119 120 121 122 123 124 125 126 127 Purpose Sostenuto On/Off Soft Pedal On/Off Legato Footswitch Hold 2 Sound Variation Timbre/Harmonic Release Time Attack Time Brightness Undefined General Purpose Controller 5 ~ 8 Portamento Control Undefined Reverb Send Level Effects 2 Depth Chorus Send Level Effects 4 Depth Effects 5 Depth Data Increment Data Decrement NRPN LSB NRPN MSB RPN LSB RPN MSB Undefined All Sound Off Reset All Controllers Local Control On/Off All Notes Off Omni Mode Off Omni Mode On Mono Mode On Poly Mode On X III Series User Manual 26 www.midiplus.com V1.0