community.ubnt.com
Software Downloads - Ubiquiti
Ubiquiti Help Center
UniFi - Rethinking IT - UbiquitiUbiquiti - ComplianceSoftware Downloads - UbiquitiUbiquiti - Warranty
User Guide for UBIQUITI models including: USG, Enterprise Gateway Router with Gigabit Ethernet, USG Enterprise Gateway Router with Gigabit Ethernet
File Info : application/pdf, 24 Pages, 2.47MB
DocumentDocumentEnterprise Gateway Router with Gigabit Ethernet
Model: USG
Introduction
Thank you for purchasing the Ubiquiti Networks® UniFi® Security Gateway. This Quick Start Guide is designed to guide you through installation and also includes warranty terms.
Package Contents
UniFi Security Gateway
Power Adapter (12V, 1A)
Power Cord
Screws (Qty. 2)
Screw Anchors (Qty. 2)
Enterprise Gateway Router with Gigabit Ethernet Model: USG
Quick Start Guide
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the professional installer's responsibility to follow local country regulations and indoor cabling requirements.
UniFi Controller System Requirements
· Microsoft Windows 8, Mac OS X, or Linux · Java Runtime Environment 1.6 (or above) · Web Browser: Mozilla Firefox, Google Chrome, Microsoft
Edge, or Microsoft Internet Explorer 11 · UniFi Controller software v5.4 or higher (available at:
www.ubnt.com/download/unifi)
Network Requirements
A UniFi Cloud Key or management station running the UniFi Controller software, located either on-site and connected to the same Layer-2 network, or off-site in the cloud or NOC
UniFi Cloud Key (UniFi Controller)
UAP-AC-PRO
UAP-AC-LR
US-16-150W
UAP-AC-M-PRO
LAN
USG (DHCP Server)
WAN Internet
GUI 5.0.2075
25
7
59
0.9
28
116
0
msec 200+
LATENCY
7 22 54
2
118
29.6 0.2
229
0.01
413
0
Mbps 700 +
THROUGHPUT
SPEED TEST
WAN
1 ACTIVE DEVICE
Inactive 0 Pending 0
LAN
5 ACTIVE DEVICES
Inactive 0 Pending 0
REFRESH RATE 2 minutes
CURRENT SITE Default
USERNAME UBNT
WLAN
18 ACTIVE DEVICES
Inactive 0 Pending 0
DOWNLOAD THROUGHPUT & LATENCY
40 Mbps 30 Mbps 20 Mbps 10 Mbps
0 Mbps 24 HRS Avg/Max Throughput
UPLOAD THROUGHPUT & LATENCY
1 Mbps 0.8 Mbps 0.6 Mbps 0.4 Mbps 0.2 Mbps 0 Mbps
24 HRS
12 HRS 12 HRS
Latency
DEVICES ON 2.4 GHZ CHANNEL
40 msec
30 msec
20 msec
1
2
3
4
5
6
7
8
9
10 11
10 msec 0 msec NOW
DEVICES ON 5 GHZ CHANNEL
36
40
44
48
52
56
60
64
40 msec
30 msec
20 msec
100
104
108
112
116
120
124
128
10 msec
0 msec NOW
132
136
140
144
149
153
157
161 165
DEVICES
24 DEVICES
WAN LAN WLAN
CLIENTS
1
5
38
18
CLIENTS
Ubiquiti NestLabs Google Desktop/Laptop NAS
Other
DEEP PACKET INSPECTION
23
4
2
13.2 GB
2
TRAFFIC
2
2
Streaming Media Network Protocols Web / Web 2.0 Security Update Unknown Other
6.49 GB 3.44 GB 921 MB 813 MB 1.25 GB 379 MB
Remote Access to UniFi Controller
Sample Network Diagram
All UniFi devices support off-site management controllers. For setup details, see the User Guide on our website at: www.ubnt.com/download/unifi
Hardware Overview Ports Panel
Interface
Console
Reset WAN 1 LAN 1 WAN 2 / LAN 2
Description
RJ45 serial console port for CLI management. Use a RJ45-to-DB9 serial console cable to connect the Console port to your computer. Then configure using the following settings: · Baud rate 115200 · Data bits 8 · Parity NONE · Stop bits 1 · Flow control NONE
Resets to factory defaults. The UniFi Security Gateway should be powered on. Press and hold the Reset button for about 10 seconds until the right LED on the WAN 2 / LAN 2 port starts flashing and then becomes solidly lit. After a few seconds, the LED will turn off, and the UniFi Security Gateway will automatically reboot.
Supports 10/100/1000 Ethernet WAN connections. Default setting is DHCP client.
Supports 10/100/1000 Ethernet LAN connections. Default setting is DHCP Server. Server IP: 192.168.1.1/24
Supports 10/100/1000 Ethernet connections. Configure the port using the UniFi Security Gateway configuration interface.
LEDs
Status
Status Indicator
Console
Power
LED
State
White
Blue
Status Alternating White/Blue
Blue Flashing
Power
Off Green
Off
Amber
Speed/ Link/
Act
Amber Flashing
Green
Green Flashing
Speed/Link/Act
Status
Fully Booted; Not Adopted
Adopted and Provisioned Device Firmware is Upgrading
Device Locator Activated from UniFi Controller
Power Off
Power On
No Link Link Established at 10/100 Mbps Link Activity at 10/100 Mbps Link Established at 1000 Mbps Link Activity at 1000 Mbps
Ethernet
Hardware Installation
The UniFi Security Gateway can be used on a level, stable surface, or mounted to a wall with the included screws and anchors. If you are not going to mount the UniFi Security Gateway on a wall, then skip to the section, Connecting Power.
WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. WARNING: FAILURE TO PROVIDE PROPER VENTILATION MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF CLEARANCE NEXT TO THE VENTILATION HOLES FOR ADEQUATE AIRFLOW. Wall-Mounting To mount the UniFi Security Gateway on a wall, you will need a drill, a 6 mm drill bit, and a Phillips screwdriver. 1. Use a 6 mm drill bit to drill two holes 90 mm apart. Insert a Screw Anchor into each hole.
90 mm
*640-00120-04* 640-00120-04
2. Use a Phillips screwdriver to secure a Screw into each anchor. Leave a clearance of approximately 3 mm between the screw head and the wall.
3 mm
3. Position the UniFi Security Gateway over the Screws, and insert the Screws into the wall-mount slots located on the bottom of the UniFi Security Gateway. Then slide the UniFi Security Gateway down to lock it into place.
12VDC
Connecting Power 1. Connect the Power Adapter to the power port.
2. Connect the Power Cord to the Power Adapter. Connect the other end of the Power Cord to a grounded power source.
Network Connections 1. Connect an Ethernet cable from a broadband modem or
WAN to the WAN 1 port.
2. Connect an Ethernet cable from a network switch to the LAN 1 port.
Note: LAN 1 is set to DHCP Server by default.
Software Installation
Download and install the latest version of the UniFi Controller software at: www.ubnt.com/download/unifi From a management station connected to the same Layer-2 network, launch the installer and follow the on-screen instructions.
Note: If you already have UniFi Controller v5.4 or higher installed, go to the section, Adopting the UniFi Security Gateway. 1. The Ubiquiti UniFi Controller window will appear. Click Launch a Browser to Manage the Network.
2. Select your country and time zone. Alternatively, you can click restore from a previous backup to use a file that contains your backup settings. Click Next.
3. The UniFi Controller will discover the UniFi Security Gateway with the default IP Address,192.168.1.1. Select the device, and click Next.
4. Create an SSID (wireless network name) and Security Key. Click Next. If you do not have any UniFi APs on the network, click Skip.
5. Create an Admin Name and Password for super admin access to the UniFi Controller. Confirm the Password, and click Next.
6. Review the UniFi Controller settings. Click Finish to complete the UniFi Setup Wizard.
7. The login screen for the UniFi Controller will appear. Enter the Admin Name and Password that you created in the UniFi Setup Wizard. Click Login.
The UniFi Controller dashboard window will appear. Adopting the UniFi Security Gateway 1. From the UniFi Controller dashboard, click Devices in the
left menu bar.
2. In the Devices window, locate UniFi Gateway in the list of devices under the Model column. To adopt and provision the gateway, click Adopt.
3. The Status Indicator on the UniFi Security Gateway will turn blue to confirm that it is successfully adopted.
Optional WAN Port Configuration via Layer 3 By default, the WAN port is set to DHCP so it can be assigned network settings by the service provider. To change the setting, connect a computer directly (or through a switch) to the LAN 1 port of the UniFi Security Gateway. 1. From a web browser, go to https://setup.ubnt.com/
2. The UniFi Gateway login window will appear. Enter your Username and Password. Click Sign In.
Note: If the UniFi Security Gateway has not been adopted by a UniFi Controller, the login window will be skipped and the Setup window will appear. 3. In the Setup window, click Edit Configuration to configure the WAN port to DHCP, Static IP, or PPPoE.
For information on using the UniFi Controller software, refer to the User Guide located on our website at: www.ubnt.com/download/unifi
Specifications
UniFi Security Gateway
Dimensions
135 x 135 x 28.3 mm (5.32 x 5.32 x 1.11")
Weight
366 g (12.9 oz)
Networking Interfaces Serial Console Port Data Ports
(1) RJ45 Serial Port (3) 10/100/1000 Ethernet Ports
Max. Power Consumption
7W
Power Supply
12VDC, 1A Power Adapter (Included)
Supported Voltage Range
9 to 24VDC
LEDs System Serial Console Port Data Ports
Status Power Speed/Link/Activity
Layer 3 Forwarding Performance
Packet Size: 64 Bytes
Packet Size: 512 Bytes or Larger
1,000,000 pps 3 Gbps (Line Rate)
Processor
Dual-Core 500 MHz, MIPS64 with Hardware Acceleration
for Packet Processing
System Memory
512 MB DDR2 RAM
On-Board Flash Storage
2 GB
Rackmount
Yes
Operating Temperature
-10 to 45° C (14 to 113° F)
Operating Humidity
10 to 90% Noncondensing
Certifications
CE, FCC, IC
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow.
WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
WARNING: Do not use this product in a location that can be submerged by water.
WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements indicated on the manufacturer's label. Connection to a different power source than those specified may result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
a. Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
b. The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
c. Contact a qualified electrician or the manufacturer if there are questions about the installation prior to connecting the equipment.
d. Protective earthing is provided by Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national wiring rules and regulations.
Limited Warranty
UBIQUITI NETWORKS, Inc ("UBIQUITI NETWORKS") warrants that the product(s) furnished hereunder (the "Product(s)") shall be free from defects in material and workmanship for a period of one (1) year from the date of shipment by UBIQUITI NETWORKS under normal use and operation. UBIQUITI NETWORKS' sole and exclusive obligation and liability under the foregoing warranty shall be for UBIQUITI NETWORKS, at its discretion, to repair or replace any Product that fails to conform to the above warranty during the above warranty period. The expense of removal and reinstallation of any Product is not included in this warranty. The warranty period of any repaired or replaced Product shall not extend beyond its original term.
Warranty Conditions
The above warranty does not apply if the Product:
(I) has been modified and/or altered, or an addition made thereto, except by Ubiquiti Networks, or Ubiquiti Networks' authorized representatives, or as approved by Ubiquiti Networks in writing;
(II) has been painted, rebranded or physically modified in any way;
(III) has been damaged due to errors or defects in cabling;
(IV) has been subjected to misuse, abuse, negligence, abnormal physical, electromagnetic or electrical stress, including lightning strikes, or accident;
(V) has been damaged or impaired as a result of using third party firmware;
(VI) has no original Ubiquiti MAC label, or is missing any other original Ubiquiti label(s); or
(VII) has not been received by Ubiquiti within 30 days of issuance of the RMA.
In addition, the above warranty shall apply only if: the product has been properly installed and used at all times in accordance, and in all material respects, with the applicable Product documentation; all Ethernet cabling runs use CAT5 (or above), and for outdoor installations, shielded Ethernet cabling is used, and for indoor installations, indoor cabling requirements are followed.
Returns
No Products will be accepted for replacement or repair without obtaining a Return Materials Authorization (RMA) number from UBIQUITI NETWORKS during the warranty period, and the Products being received at UBIQUITI NETWORKS' facility freight prepaid in accordance with the RMA process of UBIQUITI NETWORKS. Products returned without an RMA number will not be processed and will be returned freight collect or subject to disposal. Information on the RMA process and obtaining an RMA number can be found at: www.ubnt.com/support/warranty
Disclaimer
EXCEPT FOR ANY EXPRESS WARRANTIES PROVIDED HEREIN, UBIQUITI NETWORKS, ITS AFFILIATES, AND ITS AND THEIR THIRD PARTY DATA, SERVICE, SOFTWARE AND HARDWARE PROVIDERS HEREBY DISCLAIM
AND MAKE NO OTHER REPRESENTATION OR WARRANTY OF ANY KIND, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, REPRESENTATIONS, GUARANTEES, OR WARRANTIES OF MERCHANTABILITY, ACCURACY, QUALITY OF SERVICE OR RESULTS, AVAILABILITY, SATISFACTORY QUALITY, LACK OF VIRUSES, QUIET ENJOYMENT, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT AND ANY WARRANTIES ARISING FROM ANY COURSE OF DEALING, USAGE OR
TRADE PRACTICE IN CONNECTION WITH SUCH PRODUCTS AND SERVICES. BUYER ACKNOWLEDGES THAT NEITHER UBIQUITI NETWORKS NOR ITS THIRD PARTY PROVIDERS CONTROL BUYER'S EQUIPMENT OR THE TRANSFER OF DATA OVER COMMUNICATIONS FACILITIES, INCLUDING
THE INTERNET, AND THAT THE PRODUCTS AND SERVICES MAY BE SUBJECT TO LIMITATIONS, INTERRUPTIONS, DELAYS, CANCELLATIONS AND OTHER PROBLEMS INHERENT IN THE USE OF COMMUNICATIONS FACILITIES. UBIQUITI NETWORKS, ITS AFFILIATES AND ITS AND THEIR THIRD PARTY PROVIDERS ARE NOT RESPONSIBLE FOR ANY INTERRUPTIONS, DELAYS, CANCELLATIONS, DELIVERY FAILURES, DATA LOSS, CONTENT CORRUPTION, PACKET LOSS, OR OTHER DAMAGE RESULTING FROM ANY
OF THE FOREGOING. In addition, UBIQUITI NETWORKS does not warrant
that the operation of the Products will be error-free or that operation will be uninterrupted. In no event shall UBIQUITI NETWORKS be responsible for damages or claims of any nature or description relating to system performance, including coverage, buyer's selection of products (including the Products) for buyer's application and/or failure of products (including the Products) to meet government or regulatory requirements.
Limitation of Liability
EXCEPT TO THE EXTENT PROHIBITED BY LOCAL LAW, IN NO EVENT WILL UBIQUITI OR ITS SUBSIDIARIES, AFFILIATES OR SUPPLIERS BE LIABLE FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR OTHER DAMAGES (INCLUDING LOST PROFIT, LOST DATA, OR DOWNTIME COSTS), ARISING OUT OF THE USE, INABILITY TO USE, OR THE RESULTS OF USE OF THE
PRODUCT, WHETHER BASED IN WARRANTY, CONTRACT, TORT OR OTHER LEGAL THEORY, AND WHETHER OR NOT ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
Note
Some countries, states and provinces do not allow exclusions of implied warranties or conditions, so the above exclusion may not apply to you. You may have other rights that vary from country to country, state to state, or province to province. Some countries, states and provinces do not allow the exclusion or limitation of liability for incidental or consequential damages, so the above limitation may not apply to you. EXCEPT TO THE EXTENT ALLOWED BY LOCAL LAW, THESE WARRANTY TERMS DO NOT EXCLUDE,
RESTRICT OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY
STATUTORY RIGHTS APPLICABLE TO THE LICENSE OF ANY SOFTWARE (EMBEDDED IN THE PRODUCT) TO YOU. The United Nations Convention on Contracts for the International Sale of Goods shall not apply to any transactions regarding the sale of the Products.
Compliance
FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including
interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
ISED Canada
CAN ICES-3(A)/NMB-3(A)
This Class A digital apparatus complies with Canadian CAN ICES-3(A).
CAN ICES-3(A)/NMB-3(A)
Cet appareil numérique de la classe A est conforme à la norme NMB-3(A) Canada.
Australia and New Zealand
Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
CE Marking
CE marking on this product represents the product is in compliance with all directives that are applicable to it.
RoHS/WEEE Compliance Statement
English
European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. The symbol indicates that this product should be disposed of separately from regular household waste streams. It is your responsibility to dispose of this and other electric and electronic equipment via designated collection facilities appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. For more detailed information about the disposal of your old equipment, please contact your local authorities, waste disposal service, or the shop where you purchased the product.
Deutsch
Die Europäische Richtlinie 2012/19/EU verlangt, dass technische Ausrüstung, die direkt am Gerät und/oder an der Verpackung mit diesem Symbol versehen ist, nicht zusammen mit unsortiertem Gemeindeabfall entsorgt werden darf. Das Symbol weist darauf hin, dass das Produkt von regulärem Haushaltmüll getrennt entsorgt werden sollte. Es liegt in Ihrer Verantwortung, dieses Gerät und andere elektrische und elektronische Geräte über die dafür zuständigen und von der Regierung oder örtlichen Behörden dazu bestimmten Sammelstellen zu entsorgen. Ordnungsgemäßes Entsorgen und Recyceln trägt dazu bei, potentielle negative Folgen für Umwelt und die menschliche Gesundheit zu vermeiden. Wenn Sie weitere Informationen zur Entsorgung Ihrer Altgeräte benötigen, wenden Sie sich bitte an die örtlichen Behörden oder städtischen Entsorgungsdienste oder an den Händler, bei dem Sie das Produkt erworben haben.
Español
La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación. Es responsabilidad suya desechar este y cualesquiera otros aparatos eléctricos y electrónicos a través de los puntos de recogida que ponen a su disposición el gobierno y las autoridades locales. Al desechar y reciclar correctamente estos aparatos estará contribuyendo a evitar posibles consecuencias negativas para el medio ambiente y la salud de las personas. Si desea obtener información más detallada sobre la eliminación segura de su aparato usado, consulte a las autoridades locales, al servicio de recogida y eliminación de residuos de su zona o pregunte en la tienda donde adquirió el producto.
Français
La directive européenne 2012/19/UE exige que l'équipement sur lequel est apposé ce symbole sur le produit et/ou son emballage ne soit pas jeté avec les autres ordures ménagères. Ce symbole indique que le produit doit être éliminé dans un circuit distinct de celui pour les déchets des ménages. Il est de votre responsabilité de jeter ce matériel ainsi que tout autre matériel électrique ou électronique par les moyens de collecte indiqués par le gouvernement et les pouvoirs publics des collectivités territoriales. L'élimination et le recyclage en bonne et due forme ont pour but de lutter contre l'impact néfaste potentiel de ce type de produits sur l'environnement et la santé publique. Pour plus d'informations sur le mode d'élimination de votre ancien équipement, veuillez prendre contact avec les pouvoirs publics locaux, le service de traitement des déchets, ou l'endroit où vous avez acheté le produit.
Italiano
La direttiva europea 2012/19/UE richiede che le apparecchiature contrassegnate con questo simbolo sul prodotto e/o sull'imballaggio non siano smaltite insieme ai rifiuti urbani non differenziati. Il simbolo indica che questo prodotto non deve essere smaltito insieme ai normali rifiuti domestici. È responsabilità del proprietario smaltire sia questi prodotti sia le altre apparecchiature elettriche ed elettroniche mediante le specifiche strutture di raccolta indicate dal governo o dagli enti pubblici locali. Il corretto smaltimento ed il riciclaggio aiuteranno a prevenire conseguenze potenzialmente negative per l'ambiente e per la salute dell'essere umano. Per ricevere informazioni più dettagliate circa lo smaltimento delle vecchie apparecchiature in Vostro possesso, Vi invitiamo a contattare gli enti pubblici di competenza, il servizio di smaltimento rifiuti o il negozio nel quale avete acquistato il prodotto.
Declaration of Conformity
[Bulgarian] UBIQUITI NETWORKS , USG 2014/30/, 2014/35/. : www.ubnt.com/compliance
Hrvatski [Croatian] UBIQUITI NETWORKS ovim putem izjavljuje da je ovaj ureaj USG sukladan osnovnim zahtjevima i ostalim bitnim odredbama Direktiva 2014/30/EU, 2014/35/EU. Cjeloviti tekst EU izjave o sukladnosti dostupan je na sljedeoj internetskoj adresi: www.ubnt.com/compliance
Cestina [Czech] UBIQUITI NETWORKS tímto prohlasuje, ze toto USG zaízení, je ve shod se základními pozadavky a dalsími píslusnými ustanoveními smrnic 2014/30/EU, 2014/35/EU. Úplné znní EU prohlásení o shod je k dispozici na této internetové adrese: www.ubnt.com/compliance
Dansk [Danish] Hermed, UBIQUITI NETWORKS, erklærer at denne USG enhed, er i overensstemmelse med de væsentlige krav og øvrige relevante krav i direktiver 2014/30/EU, 2014/35/EU. EUoverensstemmelseserklæringens fulde tekst kan findes på følgende internetadresse: www.ubnt.com/compliance
Nederlands [Dutch] Hierbij verklaart UBIQUITI NETWORKS, dat deze USG apparaat, in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijnen 2014/30/EU, 2014/35/EU. De volledige tekst van de EUconformiteitsverklaring kan worden geraadpleegd op het volgende internetadres: www.ubnt.com/compliance
English Hereby, UBIQUITI NETWORKS, declares that this USG device, is in compliance with the essential requirements and other relevant provisions of Directives 2014/30/EU, 2014/35/EU. The full text of the EU declaration of conformity is available at the following internet address: www.ubnt.com/compliance
Eesti keel [Estonian] Käesolevaga UBIQUITI NETWORKS kinnitab, et antud USG seade, on vastavus olulistele nõuetele ja teistele asjakohastele sätetele direktiivide 2014/30/EL, 2014/35/EL. ELi vastavusdeklaratsiooni täielik tekst on kättesaadav järgmisel internetiaadressil: www.ubnt.com/compliance
Suomi [Finnish] Täten UBIQUITI NETWORKS vakuuttaa, että tämä USG laite, on yhdenmukainen olennaisten vaatimusten ja muiden sitä koskevien direktiivien 2014/30/EU, 2014/35/EU. EUvaatimustenmukaisuusvakuutuksen täysimittainen teksti on saatavilla seuraavassa internetosoitteessa: www.ubnt.com/compliance
Français [French] Par la présente UBIQUITI NETWORKS déclare que l'appareil USG, est conforme aux exigences essentielles et aux autres dispositions pertinentes des directives 2014/30/UE, 2014/35/UE. Le texte complet de la déclaration UE de conformité est disponible à l'adresse internet suivante: www.ubnt.com/compliance
Deutsch [German] Hiermit erklärt UBIQUITI NETWORKS, dass sich dieses USG Gerät, in Übereinstimmung mit den grundlegenden Anforderungen und den anderen relevanten Vorschriften der Richtlinien 2014/30/EU, 2014/35/EU befindet. Der vollständige Text der EUKonformitätserklärung ist unter der folgenden Internetadresse verfügbar: www.ubnt.com/compliance
[Greek] , UBIQUITI NETWORKS, USG, 2014/30/EE, 2014/35/EE. : www.ubnt.com/compliance
Magyar [Hungarian] Ezennel UBIQUITI NETWORKS kijelenti, hogy ez a USG készülék megfelel az alapvet követelményeknek és más vonatkozó 2014/30/EU, 2014/35/EU irányelvek rendelkezéseit. Az EUmegfelelségi nyilatkozat teljes szövege elérhet a következ internetes címen: www.ubnt.com/compliance
Íslenska [Icelandic] Hér, UBIQUITI NETWORKS, því yfir að þetta USG tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipana 2014/30/ESB, 2014/35/ESB. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi: www.ubnt.com/compliance
Italiano [Italian] Con la presente, UBIQUITI NETWORKS, dichiara che questo dispositivo USG, è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti delle direttive 2014/30/UE, 2014/35/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: www.ubnt.com/compliance
Latvi kalba [Latvian] Ar so, UBIQUITI NETWORKS, deklar, ka USG ierce, ir saska ar btiskajm prasbm un citiem attiecgiem noteikumiem Direktvs 2014/30/ES, 2014/35/ES. Pilns ES atbilstbas deklarcijas teksts ir pieejams sd interneta vietn: www.ubnt.com/compliance
Lietuvi kalba [Lithuanian] UBIQUITI NETWORKS deklaruoja, kad sis USG renginys atitinka esminius reikalavimus ir kitas 2014/30/ES, 2014/35/ES Direktyv nuostatas. Visas ES atitikties deklaracijos tekstas prieinamas siuo interneto adresu: www.ubnt.com/compliance
Malti [Maltese] Hawnhekk, UBIQUITI NETWORKS, tiddikjara li dan ilmezz USG huwa konformi marrekwiiti essenzjali u dispoizzjonijiet rilevanti orajn ta `Direttivi 2014/30/UE, 2014/35/UE. Iddikjarazzjoni talkonformità tista' tii kkonsultata minn www.ubnt.com/compliance
Norsk [Norwegian] Herved UBIQUITI NETWORKS, erklærer at denne USG enheten, er i samsvar med de grunnleggende kravene og andre relevante bestemmelser i direktivene 2014/30/EU, 2014/35/EU. Den fulle teksten til EUsamsvarserklæringen er tilgjengelig på følgende internettadresse: www.ubnt.com/compliance
Polski [Polish] Niniejszym, Ubiquiti Networks, owiadcza, e urzdzenie USG, jest zgodny z zasadniczymi wymaganiami oraz pozostalymi stosownymi postanowieniami Dyrektyw 2014/30/UE, 2014/35/UE. Pelny tekst deklaracji zgodnoci UE jest dostpny pod nastpujcym adresem internetowym: www.ubnt.com/compliance
Português [Portuguese] UBIQUITI NETWORKS declara que este dispositivo USG, está conforme com os requisitos essenciais e outras disposições das Directivas 2014/30/UE, 2014/35/UE. O texto integral da declaração de conformidade está disponível no seguinte endereço de Internet: www.ubnt.com/compliance
Român [Romanian] Prin prezenta, UBIQUITI NETWORKS declar c acest dispozitiv USG este în conformitate cu cerinele eseniale i alte prevederi relevante ale Directivelor 2014/30/UE, 2014/35/UE. Textul integral al declaraiei UE de conformitate este disponibil la urmtoarea adres internet: www.ubnt.com/compliance
Slovencina [Slovak] Týmto UBIQUITI NETWORKS, prehlasuje, ze toto USG zariadenie, je v súlade so základnými poziadavkami a alsími relevantnými ustanoveniami smernice 2014/30/EÚ, 2014/35/EÚ. Úplné EÚ vyhlásenie o zhode je k dispozícii na tejto internetovej adrese: www.ubnt.com/compliance
Slovenscina [Slovenian] Druzba UBIQUITI NETWORKS izjavlja, da je naprava USG v skladu z obveznimi zahtevami in drugimi ustreznimi dolocbami direktiv 2014/30/EU in 2014/35/EU. Celotno besedilo izjave EU o skladnosti je na voljo na naslednjem spletnem naslovu: www.ubnt.com/compliance
Español [Spanish] Por medio de la presente UBIQUITI NETWORKS declara que este dispositivo USG, cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de las Directivas 2014/30/UE, 2014/35/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: www.ubnt.com/compliance
Svenska [Swedish] Härmed UBIQUITI NETWORKS, intygar att denna USG enhet är i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiven 2014/30/EU, 2014/35/EU. Den fullständiga texten till EUförsäkran om överensstämmelse finns på följande webbadress: www.ubnt.com/compliance
Online Resources
Website www.ubnt.com Support help.ubnt.com Community community.ubnt.com Downloads downloads.ubnt.com
Ubiquiti Networks, Inc. 685 Third Avenue, 27th Floor New York, NY 10017 USA
©2014-2017 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, and UniFi are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries. All other trademarks are the property of their respective owners.
NBPH081717