Instruction Manual for ARGUS models including: GPS-800 Power Supply, GPS-800, Power Supply
Inter-Tech Argus GPS-800 800W ATX 2.4 ab € 70,49 (2023) | Preisvergleich Geizhals Österreich
Inter-Tech Argus GPS-900 900W ATX 2.4 (88882209) starting from £ 97.39 (2023) | Price Comparison Skinflint UK
File Info : application/pdf, 22 Pages, 367.88KB
DocumentDocumentTable of contents 1. Introduction............................................................................................................................................................................................................... 4 2. Signs and symbols..................................................................................................................................................................................................... 5 3. Safety.......................................................................................................................................................................................................................... 6 3.1 Intended use ......................................................................................................................................................................................................... 6 3.2 General information ............................................................................................................................................................................................ 6 3.3 Danger and protection ........................................................................................................................................................................................ 7 4. Technical data .......................................................................................................................................................................................................... 8 4.1 General data ......................................................................................................................................................................................................... 8 4.2 Output .................................................................................................................................................................................................................... 9 4.3 Safety ................................................................................................................................................................................................................... 10 4.4 Efficiency ............................................................................................................................................................................................................. 11 5. Connectors ............................................................................................................................................................................................................. 11 5.1 Quantity .............................................................................................................................................................................................................. 12 5.2 Pin configuration ................................................................................................................................................................................................ 13 6. Assembling and initial operation ......................................................................................................................................................................... 15 7. Fan control .............................................................................................................................................................................................................17 8. FAQ .......................................................................................................................................................................................................................... 17 9. Maintenance ........................................................................................................................................................................................................... 18 10. Disposal ................................................................................................................................................................................................................... 19 11. Warranty terms ..................................................................................................................................................................................................... 19 Manual ArgusNT® GPS-Series Page 3 1. Introduction Thank you for buying an ArgusNT® power supply. You chose a high-quality and high-efficient power supply which is made from selected components and subjected to a strict quality management system. This ensures best performance and reliability. The power supply has a high efficiency which respects the environmental and lowers the cost of power. This is documented by the 80+ Gold EU certification of the independent web site PlugLoadSolutions made by CLEAResult, the biggest North American provider of energy efficiency programs and services. The high 12V output, up to four PCI Express connectors (depending model) and the newest Intel ATX 12V 2.4 standard ensure a future-proof system. We recommend to read this manual carefully and especially paying attention for the security advices to enjoy this power supply for a long time. Page 4 Manual ArgusNT® GPS-Series 2. Signs and symbols Symbols Meaning Handling and effects of safety instructions. Allusion to dangerous situation which can cause injury or death if not prohibited. Allusion to dangerous situation which can cause fire. Allusion to property damages and general information. Manual ArgusNT® GPS-Series Page 5 3. Safety 3.1 Intended use This device is made only for indoor use and for mounting in computer cases. Don´t use and store the device inside humid rooms or near water. Don´t use it close to source of heat. The additional heat could lead to overheating and fire. 3.2 General information Please read this manual carefully before installing or using this product. Keep this manual and pass it by passing the product. Please follow the instructions and warnings of this manual before using the product. The inobservance of this manual can cause violations and damages. We disclaim liability for violations and damages caused by inobservance of this manual. Page 6 Manual ArgusNT® GPS-Series 3.3 Danger and protection Don´t stick any items into the power supply (electric strike). Don´t pull the plug by pulling at the cable. Don´t use any patched or damaged cable or plug. Don´t place the device close to source of heat . In case of strange noise or smell pull the power cord out of the socket. Don´t open the housing of the device (fire hazzard/ electric strike). Ensure that all cables are fixed permanently. Keep the product away from children. Don´t remove the cable with wet hands (electric strike). Don´t use the product with wet hands (electric strike). Please remove the power cord from socket in case of longer non-use (Could led to overheating, fire hazard or electric strike). Keep the product free of dust (Overheating or fire). Look for sufficient airflow and ventilation to avoid overheating or fire. Leave service or cleaning only authorized and qualified personnel. Manual ArgusNT® GPS-Series Page 7 4. Technical data 4.1 General data Standard Input voltage Input current PFC Power factor Stand-by MTBF Environmental Page 8 Intel ATX 12V 2.4 100 240 V~ AC, 50-60Hz GPS-600 GPS-700 GPS-800 GPS-900 110V 8A / 230V 4A 110V 9A / 230V 4,5A 110V 10A / 230V 5A 110V 10A / 230V 6A Active > 0,90 at 100% load 0,367W 100,000h at 25°C Operation 0 40°C -85% not condensing Storage -20 90°C -95% not condensing Manual ArgusNT® GPS-Series 4.2 Output Max. GPS-600 GPS-700 GPS-800 GPS-900 Total 600W 700W 800W 900W 3,3V 5V Combined 12V -12V 5Vsb 3,3V + 5V 15A 15A 100W 50A 0,3A 2,5A 15A 15A 100W 58A 0,3A 2,5A 15A 15A 100W 66A 0,3A 2,5A 20A 20A 100W 75A 0,3A 2,5A Manual ArgusNT® GPS-Series Page 9 4.3 Safety OPP Over-Power-Protection OCP Over-Current-Protection OVP Over-Voltage-Protection SCP Short-Circuit-Protection NLP No-Load-Protection Power supply will shut down if the output is more than 130% of the nominal output. Power supply will shut down if the current of the output lines will exceed the tolerance value. To prevent further damages the power supply will shut down if a fault causes a higher output voltage. Power supply will shut down in case of a short circuit on secondary output lines. Power supply will shut down in case of no load on secondary output lines to prevent damages. Page 10 Manual ArgusNT® GPS-Series 4.4 Efficiency 230V~ Load GPS-600 GPS-700 GPS-800 GPS-900 600W 700W 800W 900W Efficiency 115V~ Load GPS-600 GPS-700 GPS-800 GPS-900 600W 700W 800W 900W 10% 88,90 % 90,60 % 91,30 % 87,70 % 20% 92,10 % 93,20 % 93,80 % 92,60 % 50% 92,90 % 93,30 % 93,40 % 93,40 % 100% 90,50 % 90,20 % 90,20 % 90,80 % 10% 87,40 % 89,40 % 90,00 % 87,40 % 20% 90,60 % 91,40 % 92,20 % 90,70 % 50% 90,60 % 91,40 % 91,40 % 91,20 % 100% 87,20 % 87,20 % 87,10 % 87,80 % Manual ArgusNT® GPS-Series Page 11 5. Connectors All connectors are standardized and made against reverse connection. In case of difficulties during connection, please make sure to use the right connector or rotate the connector by 180°. Don´t try to insert a connector forcibly. 5.1 Quantity ATX EPS/ P4 IDE 20+4pin 4+4pin 4pin SATA 15pin FDD PCIe 4pin 6+2pin GPS-600 1 2 3 6 1 4 GPS-700 1 2 3 6 1 4 GPS-800 1 2 3 6 1 4 GPS-900 1 2 3 6 1 4 Page 12 Manual ArgusNT® GPS-Series 5.2 Pin configuration 5.2.1 P1 ATX-Mainboard connector 20+4 pin Signal Pin Signal Pin +3,3V 1 +3,3V DC 13 +3,3V 2 -12V DC 14 COM 3 C OM 15 +5V DC 4 PS_ON 16 COM 5 C OM 17 +5V DC 6 C OM 18 COM 7 C OM 19 PWR_ok 8 -5V DC 20 +5V SB 9 +5V DC 21 +12V DC 10 +5V DC 22 +12V DC 11 +5V DC 23 +3,3V 12 C OM 24 1 Pins 11/ 12/ 23/ 24 are made as separate jacks. It can be swung away in case of using older Mainboards. Don´t mix the separate jack with the P4 connector. 5.2.2 EPS/ P4 Mainboard connector 4+4 pin Signal Pin Signal Pin COM 1 +12V DC 5 1 COM 2 +12V DC 6 COM 3 +12V DC 7 COM 4 +12V DC 8 Don´t plug it into another socket on the board. Depending your mainboard you need an 8pin or 4pin connector. For that the connector is divisible. In case of using just the 4pin connector the rest of the connector is without function. Manual ArgusNT® GPS-Series Page 13 5.2.3 IDE connector 4 pin Signal Pin +12V DC 1 COM 2 COM 3 +5V DC 4 1 5.2.4 FDD connector 4 pin Signal Pin Signal +5V DC 1 +12V DC COM 2 +12V DC COM 3 +12V DC +12V DC 4 +12V DC 1 5.2.5 PCI-Express connector 6+2 pin Signal Pin Signal Pin +12V DC 1 COM 5 1 +12V DC 2 COM 6 +12V DC 3 COM 7 COM 4 COM 8 Page 14 Some graphic adapter need only a 6pin plug for connection. In this case, pull off the 2pin connector from the PCIe connector. Manual ArgusNT® GPS-Series 5.2.6 SATA connector 15 pin Signal Pin # +3.3VDC 1 +3.3VDC 2 +3.3VDC 3 Masse 4 Masse 5 Masse 6 +5VDC 7 +5VDC 8 1 +5VDC 9 Masse 10 Masse 11 Masse 12 +12VDC 13 +12VDC 14 +12VDC 15 6. Assembling and initial operation 1. Take out the power supply and check the package content for completeness or damages. Please contact you local dealer for replacement in case of missing or damaged parts. Please keep the original package for shipping in case of warranty claim. Please connect the power supply to the grid after connecting all other devices. Manual ArgusNT® GPS-Series Page 15 2. Fix the power supply with the enclosed screws to the allocated space of the computer case. 3. Connect all components with the suitable cables. Please follow also chapter 5.2 (Pin configuration) as well as the instructions of the device manufacturers. A faulty connection of the components can cause damages. Please ask your local dealer or our service-hotline in case of discrepancies or questions. 4. Lay all cables in a way to avoid disturbing airflow or any rotating fan. Use the enclosed cable ties to fix the cables. 5. Connect the power supply with the electric socket. Use only the original power cord. In case of a damaged cable, please change it against an approved power cord from your local dealer. 6. Switch on the power supply at the backside of the power supply. Your computer is ready now. By power-on the power supply it is in Stand-By mode to start the computer by pressing the power button at the case front. To separate the computer totally from the electric grid power off the power supply directly. Page 16 Manual ArgusNT® GPS-Series 7. Fan Control The power supplies of the ArgusNT® GPS-Series are provided with an intelligent fan control (IFC) which turns the fan on only if the temperature inside the power supply exceeds 65°C and an additional cooling is necessary. If the temperature falls below 65°C the fan will be switched off and will start again if the temperature will exceed this mark again. In addition the fan speed is regulated between 0 and 1200 rpm automatically. This keeps the noise level of the fan very low. 8. FAQ Error The power supply runs shortly and stops. Power supply does not start Manual ArgusNT® GPS-Series Possible reason(s) Short circuit at Mainboard, HDD, FDD or CD-ROM Secondary connectors not connected Main switch on power supply is off Power cord is not connected Help Check all connectors for right connection. Eliminate short circuit or change components. Check all connectors for right connection. Switch on the main switch of the power supply. Check if power cord is connected to power supply and electric grid. Page 17 Error Possible reason(s) Power cord defective Power socket defective Help Change power cord against an approved new power cord. Let authorized experts check the socket. Please unplug power cord generally when working inside the computer case. In case of checking the electric socket exists risk of electric strike. Leave work on mains supply only authorized experts. 9. Maintenance The power supply needs no maintenance which requires opening of the housing or working inside the power supply. But cause of the intake of air, dust can collect inside the power supply. This can lead to overheating or fire. You can remove this dust with compressed air by yourself. To do this, unplug the power supply Page 18 Manual ArgusNT® GPS-Series from mains supply, dismount the power supply in reversed way as described before and blow the dust with compressed air through the fan grid out of the housing. Do not use a wet or moist rag to remove dust. Hazard of electric shock. Do not open the power supply in any circumstances. You will risk your life by an electric shock, destroy any components and lose your warranty claim. We recommend to let authorized experts do the cleaning. 10. Disposal Please dispose this device by using the special discharge point for electronic waste and ask your municipality or disposal company in case of further questions. Please dispose the cardboard and plastics by using the appropriate containers of the household garbage. 11. Warranty terms In spite of best efforts and quality controls a device can have a fault. But because the ArgusNT® GPS- series is 9Manual ArgusNT® GPS-Series Page 19 made by highest quality standard we extend the legal warranty terms to totally 5 years up from purchase date at proper use. In case of a warranty claim please contact your dealer from whom you bought the product. We will grant no warranty by: - Missing or damaged warranty seal, - Negligent behavior, - Improper use, - Nonobservance of the manual, - External violence, - Acts of god, - Damages caused by manipulation, upgrading, updating or reconstruction of hardware or software - Damages caused by other harm, In case of data loss Inter-Tech will only be liable at wanton negligence or deliberate intention or, in all other cases, only for the recovery of data from a continuous, daily backup. Inter-Tech does not assume liability for all other matters. Please look also at our complete warranty terms on our website. Page 20 Manual ArgusNT® GPS-SeriesMicrosoft Word 2016