AlphaTheta HP-TX01 Quick Start Guide

Introduction

This document provides a quick start guide for the AlphaTheta HP-TX01. It includes instructions for setup and basic operation.

For comprehensive manuals and product support, visit: alphatheta.com/support/

This guide is available in multiple languages, including English, French, German, Italian, Dutch, Spanish, Portuguese, Russian, Chinese, and Japanese.

Publication Date: July 1, 2024

Manufactured in China.

Example of Connections

This section illustrates how to connect the HP-TX01 to your audio equipment.

Headphone Connection: Connect your AlphaTheta HDJ-F10 headphones to the HP-TX01 using the provided cable. The HP-TX01 utilizes SonicLink technology for wireless audio transmission.

Audio Source Connection: Connect the HP-TX01 to your DJ mixer or other audio source using the appropriate audio cables (e.g., RCA cables, not explicitly shown but implied by typical DJ setups).

Diagram Description: A diagram shows the HDJ-F10 headphones connected via a cable to the HP-TX01 unit. The HP-TX01 unit is also shown connected to a DJ mixer or audio interface via other cables.

Basic Operation

Follow these steps to power on and pair the HP-TX01.

Powering On and Pairing

Step 1: Connect Power: Plug the DC power adapter into the DC INPUT port on the HP-TX01 and connect it to a power outlet.

Diagram Description: An illustration shows the HP-TX01 unit with a power cable being plugged into a port labeled "DC INPUT".

Step 2: Initiate Pairing: Press and hold the pairing button on the HP-TX01 for approximately 5 seconds until the indicator light shows pairing mode.

Diagram Description: An illustration shows the HP-TX01 unit. A finger is pressing a button labeled "Pairing button". An arrow indicates pressing and holding for 5 seconds (5s).

Step 3: Confirm Connection: The device will indicate when pairing is successful.

Diagram Description: An illustration shows the HP-TX01 unit with an indicator light, possibly indicating a successful connection after pairing.

Key Components:

• Input Terminal: The port for receiving audio signals or power (labeled as 'Input terminal' / 'Prise d'entrée' / '输入端子').
• Pairing Button: Used to initiate the wireless pairing process (labeled as 'Pairing button' / 'Touche de couplage' / '配对按钮').