ClearCraze+ Truly Wireless Earbuds
User's Guide for Model IAEBT213 v3243-01
Controls and Functions
Control Touch Pad
The Control Touch Pad is sensitive and must be touched or tapped within the circle on the earbud to operate properly.
Microphone: [microphone icon]
LED Indicator Light: [indicator light icon]
Charging Contacts: [charging contacts icon]
On Ear Controls
- General: Tap and hold for 5 seconds to power ON/OFF.
- Phone Calls: Tap to answer/end phone calls.
- Voice Assist: Tap and hold for 2 seconds to activate Voice Assistant.
- Music: Tap to play/pause music. Tap twice to skip to the next track (RIGHT). Tap twice to play the previous track (LEFT). Tap 3 times to turn volume up (RIGHT). Tap 3 times to turn volume down (LEFT).
Charging
Charging the Case
The earbuds offer approximately 5.5 hours of battery life at 50% volume. To charge the case, use the included USB-C to USB cable to connect to the USB port of a powered-on computer or a UL certified USB power adapter (not included).
The case's Charging Indicator Light will flash orange while charging and display a solid orange light when charging is complete.
The total charge time for the case is approximately 1.5 hours. The case provides 1.5 additional charges for the earbuds.
Diagram Description: A laptop is shown connected via a USB-C to USB cable to the charging case.
Charging the Earbuds
Place the earbuds into the charging case, ensuring the charging contacts align with the case's contacts. Match the left (L) and right (R) earbuds to their respective docking stations.
The LED Indicator Light on each earbud will display an orange light while charging and will turn off when charging is complete. The case's internal Charging Indicator Light displays a solid white light while the earbuds are charging.
The charging time for the earbuds is approximately 1 hour and 10 minutes.
Case & Auto-On Feature
Charging Case & Auto-On Feature
While the case power is ON:
- Placing the earbuds in the charging case and closing it automatically powers them off and begins charging.
- Removing the earbuds from the case automatically powers them on, links them, and connects to the last used Bluetooth device (provided the earbuds were previously linked and connected to a Bluetooth device).
Pairing Bluetooth
Pairing Bluetooth
Note: When earbuds are powered on, they automatically link and enter pairing mode. A single earbud can be powered on to be used as a single unit.
- With the earbuds powered on, connect to your Bluetooth device.
- On your Bluetooth device, search for nearby devices in your Bluetooth settings and select "IAEBT213". A voice prompt will announce "Bluetooth connected" upon successful connection.
- Audio played through the connected Bluetooth device will now be heard through both earbuds. Use the controls on the connected device to play audio and adjust volume.
? Please Note: Due to the nature of truly wireless earbuds, you may experience slight interruptions with your audio in areas with multiple 2.4Ghz bands or in high wireless traffic areas.
Reconnect Bluetooth
Reconnect Bluetooth
If you have trouble connecting the earbuds and your device, or if the earbuds become unpaired, follow these steps:
- Delete "IAEBT213" from the list of devices in your Bluetooth settings.
- Turn the earbuds off: Press and hold the Control Touch Pad for 5 seconds. Turn the earbuds back on: Press and hold the Control Touch Pad for another 5 seconds.
- Return the earbuds to the case. Remove them and allow them to automatically enter pairing mode. Connect to your Bluetooth device using the pairing steps outlined previously.
Customer Support
Customer Service: 1-888-999-4215
Email Support: prodinfo@dpiinc.com
Email Parts: partsinfo@dpiinc.com
For Warranty Information and the most up-to-date version of this User's Guide, visit www.iLiveElectronics.com.
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com.
FCC Warnings
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Additional Warnings
- WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
- WARNING: Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
- Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
- This product meets and complies with all Federal regulations.
- To avoid hearing damage, make sure that the volume on your music player is turned down before connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume until you reach a comfortable listening level.
- ⚠️ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This product meets and complies with required Federal product guidelines.
