Prtukyt-008 True Wireless Earbuds User Manual

Product Overview

The Prtukyt-008 package includes:

• Prtukyt-008 wireless earphones x1
• Prtukyt-008 charging case x1
• Ear caps (small/large) x2
• Charging cable x1
• The Manual x1

Components:

• Charging box
• TWS earbuds
• LED indicator (White)
• Multi-function button (MFB)
• Microphone
• Type-C charging port

Pairing

Step 1: Enter pairing status

For first-time use, open the charging box and take out the earphones (they are in power-off status). Press and hold the MFB button for 5 seconds. The earphones will turn on and enter pairing status. The indicator light will flash red and white alternately.

Step 2: Phone search and connect

Turn on the Bluetooth function on your mobile phone. Search for the Bluetooth device named "Prtukyt-008" and click "Connected". An English prompt "Connected" indicates a successful connection.

Lost Connection

Reason 1: Ensure Bluetooth settings are turned on.

Reason 2: The earphones may disconnect if they are beyond the Bluetooth range of the device.

Call and Music Controls

• Answer or end a call: Short press the MFB button of either earbud once.
• Reject a call: Long press the MFB button of either earbud once.
• Stop/Play music: Short press the MFB button of either earbud once.
• Activate Voice Assistant: Triple-click the MFB button.
• Next song: Double-click the MFB button on the right earphone. (If only the right earphone is used, only the next song function is available.)
• Last song: Double-click the MFB button on the left earphone. (If only the left earphone is used, only the last song function is available.)

Note: If a call comes in while playing music, the earphone will resume music playback automatically after the call ends. Using the voice assistant will pause music playback. To switch between headset and mobile phone during a call, ensure both ears are in contact with the headset.

Power Off

• Method 1: Place the earphones into the charging compartment. They will shut down automatically. (If the charging compartment is out of power, the earphones cannot be turned off and need to be charged.)
• Method 2: The earphones will shut down automatically when the power runs out.
• Method 3: The earphones will shut down automatically after 5 minutes of inactivity without any Bluetooth connection.

Charging

Earphones Charging State: Place the earphones into the charging compartment and close the top cover. The earphones will charge automatically.

Battery Indicator State of Charging Case: When earphones are placed in the charging compartment, the four white LED lights will display the corresponding power levels for 10 seconds: 100%, 75%, 50%, and 25%.

• 75%-100%: The first LED light is on.
• 50%-75%: The second LED light is on.
• 25%-50%: The third LED light is on.
• 0%-25%: The fourth LED light is on.

Earphone LED Light Status:

Charging Case Battery Use: When the charging compartment is fully charged, all four LED lights are always on.

Full Charge: Plug in an appropriate power supply. The indicator light will be white. When fully charged, all four LED lights will illuminate.

Tip:

• It takes approximately 2.5 hours to complete charging the case.
• Use a 5V 1A charger to charge the charging box.

Troubleshooting

If the earphones do not connect to your phone, try the following:

1. Ensure the BT function of the Bluetooth device is turned on.
2. Make sure the distance between the earphones and the Bluetooth device is within the connectable range.
3. Turn on your earphones.
4. Please confirm that the BT function of the Bluetooth device has been turned on.
5. Please make sure that the distance between the earphone and Bluetooth device is within the connectable range.
6. Please turn on your earphone.

Prtukyt-008 Wireless Earbuds Q&A

Q: How to pair two unpaired earphones?

A: Open the charging compartment, take out the earphones (when they are off). Press the "multi-function" button for 5 seconds to turn them on and enter pairing state. You will hear an English prompt tone "connected". Double-click the MFB button; when you hear "ding-dong", the two earphones are paired successfully.

Q: Why can't my earphones charge?

A: First, ensure the isolation film at the bottom of the earphones has been removed. Second, wipe the charging contacts with an alcohol cloth. Third, ensure the charging case is powered (if not, charge it first with the correct data cable). Fourth, ensure the earphones are placed correctly in the charging compartment. Fifth, if charging still fails, send a video of the issue to the official after-sales email.

Q: How do I connect the earphone to another phone?

A: First, disconnect the Bluetooth from the first mobile phone. Second, turn on the Bluetooth function of another mobile phone, search for "Prtukyt-008", and click Connect. The English prompt "connected" indicates a successful connection.

Q: The earbuds turn off without any action?

A: Ensure your headphones are fully charged. Check if the multi-function button was accidentally touched, causing the headset to turn off.

Q: How to use a single earphone?

A: If the Prtukyt-008 earphones are paired and a single earphone is not connected, ensure the other earphone is turned off. Press and hold the earphone's multifunction key for 5 seconds to enter pairing status, then pair with your phone.

Q: Why can't my charging case get charged?

A: Check if the charging port is blocked. Ensure the correct charging cable is used. Make sure the charging port is connected correctly.

Q: How long is the wireless distance between the left and right earbuds that will not disconnect?

A: The distance in a normal environment is approximately 2 meters (without obstacles).

Q: No sound from the headphones?

A: 1. Check if the volume is set to zero. 2. Check if the mobile phone's media audio settings are enabled.

Specifications

Safety Instructions

To ensure the longevity of your earbuds, please adhere to the following:

1. Do not disassemble, replace, or modify the product.
2. Avoid placing the product in humid environments.
3. Do not expose the earphones to corrosive liquids, as this can cause serious damage.
4. Do not use corrosive cleaners or oils to clean the earphones. If contact with liquid occurs, wipe immediately.
5. Avoid exposing the equipment to extreme temperatures (below 0°C or above 45°C).
6. Do not overcharge the equipment for extended periods, as this can cause damage and reduce battery life.
7. Prolonged use of earphones at high to moderate volumes can cause permanent hearing loss. To protect your hearing, always maintain a moderate to low volume.
8. Discontinue use immediately if you experience any discomfort or pain.
9. Use only the prescribed DC-5V 1A charger/adapter. Repeated charging and discharging will degrade battery performance over time, which is normal for all rechargeable batteries.
10. The product contains a built-in lithium battery. Do not expose the product to strong sunlight, heat, or fire, as it may explode.

Tips:

• Do not discard electronic products as household waste.
• Keep earbuds and boxes out of reach of children.
• Immersion of earphones in water will void the warranty.
• The product is IPX7 waterproof, meaning it is resistant to sweat and light rain. It cannot be used for swimming or bathing.