RTAKO ZP220 Pro Selfie Stick and Tripod

Product Introduction

The RTAKO ZP220 Pro is a versatile selfie stick and tripod designed for mobile photography and videography. It features a 360° rotatable phone clip, a reinforced tripod base for stability, and an integrated Bluetooth remote control for convenient operation.

Key components include:

• Angle set screw
• Anti-shake and steady snap handle
• Reinforced connecting rod
• 360° rotation of phone clip
• 1/4 interface
• Bluetooth remote control
• Stainless steel expansion pipe

The device is designed for stability and ease of use, supporting various shooting angles and scenarios.

Parameter Specification

Bluetooth Remote Control Introduction and Operation

The remote control allows for wireless operation of your phone's camera functions.

Remote Control Operation Instructions:

1. Power On: Long press the power button for 3 seconds. The blue indicator light will flash.
2. Pairing: On your phone, go to Settings > Bluetooth, turn on Bluetooth, search for "RTAKO", and click to pair. A "Connected" message indicates successful pairing.
3. Navigation:
   • Direction Keys: Use for switching videos (up/down on TikTok), or sliding left/right.
   • Volume Keys: Long press '+' for volume up, long press '-' for volume down in video apps.
4. "Like" Button:
   • Double-click to 'like' videos on platforms like TikTok.
   • Single-click to pause/play videos.
   • Click to auto-focus in the camera interface.
5. Shooting Key: Supports the phone's native camera app and other photo/video apps like Douyin/Kuaishou. Some models may require specific settings.
6. Charging: The indicator light is solid red while charging and turns off when fully charged.
7. Auto Shutdown: The remote automatically shuts down after 6 minutes of inactivity if not connected to Bluetooth.
8. Sleep Mode: If connected but inactive for 10 minutes, Bluetooth disconnects, and the remote enters low-power sleep. After 30 minutes of inactivity, it shuts down.

Remote Control Special Instructions:

For Apple iOS System (Settings for Photo Key):

1. iOS 13.4 and above: Go to Settings > Accessibility > Touch > AssistiveTouch and turn it on. Ensure "Screen Rotation Lock" is enabled in your phone's settings.
2. iOS 15.0 and above: Turn on AssistiveTouch > Tracking Sensitivity. Adjust the dot to the middle position (turtle icon).

For Invalid Shutter Key Position (Original Photo Album):

1. Enter the shooting interface of your camera app.
2. Long press the remote's shooting key without moving.
3. Simultaneously, short press the arrow key to move the on-screen pointer/dot to the shutter button in the app.
4. Release the button after adjustment. Note: The touch key position may vary based on phone size and app interface, requiring adjustment.

How to Use Selfie Stick

The selfie stick can be used in multiple configurations:

1. Handheld Use: Hold the device for standard selfie stick operation.
2. Anti-shake Steady Use: Utilize the sub-handle for enhanced stability. The balance handle offers 360° horizontal rotation for smooth video shooting.
3. Tripod Mode: Open the tripod base to stand the device upright on a flat surface.

The device features a reinforced connecting rod for durability.

1/4 Interface Usage

The standard 1/4 interface allows for versatile mounting options. It is compatible with:

• Sports cameras
• Digital cameras
• Ring lights
• Phone clips (using a 1/4 port phone clip)

This interface enables the attachment of various photographic accessories.

Matters Needing Attention

1. Be cautious of pinching your hand when using the selfie stick tripod.
2. Ensure the selfie stick is steady or firmly secured before installing any device to prevent accidental damage.
3. Use the selfie stick tripod on a flat surface and keep it away from children to prevent injury or damage.
4. The product contains small parts; keep away from babies to prevent swallowing.
5. The remote control contains batteries. Do not expose it to high temperatures, fire, or overheating environments. The remote control is not waterproof; avoid contact with water or corrosive liquids.
6. Do not overcharge or overdischarge the battery. If not used for a long time, charge the remote control every 3 months to maintain battery life.

Warranty Card and FCC Compliance

Warranty Card Information:

• Customer Name: [To be filled by user]
• Contact Number: [To be filled by user]
• Product Name: [To be filled by user]
• Purchase Date: [To be filled by user]
• Address: [To be filled by user]
• Remark: [To be filled by user]

FCC Compliance Statement:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator and your body.

Manufacturer Information

Brand: TAKO 锐塔克

Manufacturer: Dongguan Dianjin Technology Co., LTD

Address: Room 301, Building 5, No. 487, Tangxia Section, Dongshen Road, Tangxia Town, Dongguan City, Guangdong Province

Domestic Hotline: 400-878-1101

Country of Origin: Made in China