COLMI P76 User Manual

Charging and Activation

Before using the watch for the first time, ensure it is fully charged. If the charging icon is not displayed, please charge for another 10 minutes.

1. Use the supplied magnetic charging cable to connect it to the metal contact points on the back of the watch and charge it.
2. This product does not come with a power adapter. To ensure safety, you can use a computer USB port or a power adapter with an output power of no more than 5V-1A for charging. Please purchase a power adapter through legal channels and avoid using inferior or counterfeit adapters to prevent damage to the watch, explosions, or fires.
3. Do not charge in a humid environment. Regularly clean the watch case with a dry cloth to ensure the cleanliness of the magnetic charging port and cable for normal charging.

Buttons and Touch

The COLMI P76 smartwatch displays the time '09:40', 'THURSDAY', '06-SEPT', 'AM PM', '10349 Steps', '1034' (likely distance), '-24°C' temperature, and icons for 'SPORT', 'WATCH', and 'TI'.

• Button Functions:
• Long press to turn on the watch when it is off.
• In the powered-on state, long press to display the shutdown page and click to power off.
• On the watch face, press once to open the menu, and press the button twice in succession to switch menu styles.
• When on other interfaces, press the button to return to the watch face.

Swipe Gestures:

• Swipe up: Message notifications
• Swipe left: Custom menu
• Swipe right: Function menu
• Swipe down: Control center

Download and Connect App

Download and install the 'Da Fit' app. You can scan the QR code in this manual, scan the QR code on the watch, or search for 'Da Fit' directly in the app store to download it.

Connect the smartwatch:

1. After enabling Bluetooth on your phone, enter the app (Note: If you cannot open the app, please enable location services on your phone and then open the app) and click 'Device' -> 'Add Device' -> Bind the corresponding device that appears in the search (find the Bluetooth name and MAC address of the device on the watch in the 'Settings' -> 'About' menu) -> Click 'Connect'.
2. Establish Bluetooth connection for calls/audio via Bluetooth. In the factory state, the Bluetooth function is disabled by default, so call and music functions are not available. Swipe down to the 'Control Center' on the watch interface, go to the 'Settings' menu, click the 'Call' icon, and enable Calls and Audio via Bluetooth to activate these functions.

Functions

Dial Switch

Long press on the main screen for 2 seconds to enter the watch face switching interface, swipe left and right to change watch faces, and click to confirm. You can transfer 'Custom' watch faces via the app.

Sports Data

Displays the ? Steps, distance, and calories burned for the day. You can set step, distance, and calorie goals in the app.

Sleep

Displays the sleep monitoring status for the day, with daily updated data. When the device is connected to the app, data can be synchronized, and the device will calculate new data for the day.

Heart Rate

Enter the heart rate measurement interface, click to start the test after entering, and the bottom test light will illuminate to begin measurement. It takes about 60 seconds, and upon completion, a vibration notification will occur. If it says 'Wear watch', you need to wear the watch again.

Blood Pressure

Enter the blood pressure measurement interface, and the bottom test light will illuminate. It takes 30 to 60 seconds, and a vibration notification will occur when the measurement is complete. This measurement is based on PPG technology.

SpO₂

Enter the blood oxygen measurement interface, and the bottom test light will illuminate. It takes 30 to 60 seconds, and a vibration notification will occur when the measurement is complete. This measurement is based on PPG technology.

Message

The watch can synchronize notifications from Twitter, Facebook, WhatsApp, and more. Note: You can enable/disable notification synchronization in the app.

Sports

Includes over 100 ? Sport modes such as Walking, Running, Cycling, Jump Rope, Basketball, etc. Click the icon to start training. When the device is connected to the app, you can view more detailed content.

Music

After the watch is connected to the app, you can control music playback on your phone.

Timer

The system provides common timer intervals. Click to measure time quickly. Click the 'Custom' button to set the time.

Alarm

After the smartwatch is connected to the app, you can set single-mode alarms or recurring alarms.

Stopwatch

Click 'Start' once to start the timer, click 'Pause' once to stop the timer, and 'Reset' to reset the timer to zero.

Find Phone

When the device is connected to the app, click 'Find Phone', and the phone will ring to indicate a successful search. If the watch is not connected to the app, it will display that the phone is not connected.

Settings

Includes: Display (Brightness, Sleep, Watch Face, Menu View, Wrist Detection), Do Not Disturb mode, Power Saving mode, Vibration & Ringtone, Phone, System, About.

Weather

When the watch is connected to the app, the weather display shows real-time weather and temperature, as well as weather conditions for the week.

Control Center

Control Center: Do Not Disturb Mode, Power Saving Mode, Brightness Adjustment, Vibration & Ringtone, Electronic Business Card, Settings.

Sedentary Reminder

You can enable 'Movement Reminders' in the app to remind you to take breaks every hour.

Notes

• The measurement results of this product are for self-monitoring only and are not intended for medical purposes or diagnosis and treatment. Follow a doctor's instructions and do not use these measurement results for self-diagnosis and treatment.
• This product must not be used for diving/extended swimming or immersion in water. It must not be used in hot water/sauna environments to prevent damage to the device from steam.
• The company reserves the right to change the content of this manual without prior notice. Some functions may vary in different software versions, which is normal.

Common Problems

• The watch will not turn on. Long press the power button for more than 3 seconds, or the battery may be depleted and needs charging.
• Bluetooth is not connected or cannot connect.
  1. Try restarting the watch and reconnecting.
  2. Try reconnecting after restarting Bluetooth on your phone.
  3. Do not connect your phone to other Bluetooth devices simultaneously.
  4. If Bluetooth is disconnected, functions such as calls, message notifications, and health data synchronization will not work.
• Manual heart rate/blood oxygen/blood pressure measurements are inaccurate.
  1. During general measurements, the sensor on the watch may not be in proper contact with the body.
  2. Ensure the sensor has full contact with the wrist during measurement.
• Sleep data is not very accurate.
  1. Sleep monitoring simulates the user's self-perception of falling asleep and waking up and requires the device to be worn correctly.
  2. If worn too late or if you fall asleep too quickly, it may be inaccurate.
  3. Sleep monitoring is set by default to monitor at night from 10 PM to 8 AM the next morning.

For more common problems, please refer to the 'FAQ' section of the 'Me' app.