ASSMANN Electronic GmbH | Lüdenscheid, Germany
User Manual for DIGITUS models including: 55317, DS-55317 Wireless Collaboration System, DS-55317, Wireless Collaboration System, Collaboration System, System
1 day ago · 2 3. Package Content DS-55317: 1x Receiver unit 2x HDMI transmitter 1x USB charging adapter (10W, 5V/2A) 1x Storage tray for HDMI transmitter
3 days ago · 77BConnect with touch panel or mouse/ keyboard for KVM function 78B3 79BHDMI , A 80BConnect to TV, projector, and monitor by using the HDMI cable 81B4 82BRJ45 (Fast Ethernet) 83BConnect to router/network for internet access 84B5 85BStatus indicator 86BFlashing blue: Waiting for connection
File Info : application/pdf, 27 Pages, 1.66MB
DocumentDocumentWireless Collaboration System Click & Present Pro Manual DS-55317 Rev. 2 Set: 2x Transmitter (TX), 1x Receiver (RX) DS-55322 Rev. 2 Additional Transmitter (TX) 1. Introduction The Wireless Collaboration System from DIGITUS® brings together all your devices (notebook, tablet, smartphone) and offers a presentation solution for wireless transfer of screen content for meeting and conference rooms. Up to 30 participants can be connected with the receiver. Up to 4 participants can present/collaborate simultaneously in split screen. Notebooks can be connected with the HDMI transmitter, the set can be extended with additional transmitters (DS-55322). Share content conveniently from a tablet/smartphone using the screen sync / sharing/cast function (iOS, iPadOS/Android) of your mobile device, to do so first connect your mobile device with the receiver (SSID) via WLAN. The configuration of the system has been optimally simplified here no additional software/apps are required. Increase the efficiency of your meetings, save time and achieve optimal results. Share - Present - Collaborate. 2. Features · Share, present and collaborate from your notebook, tablet or smartphone Transmission distance of up to 50m for transmitter to receiver. Tablet or smartphone is within 10m. · Easy installation No software or app required. · Present simultaneously from up to 4 participants in split screen · Up to 30 participants (simultaneous connection to receiver) · Share notebook via HDMI transmitter or via wireless screen (Windows)/screen sync (macOS) · Share from a tablet/smartphone using the screen sync/sharing/cast function (iOS, iPadOS/Android) of your mobile device. · Touch Panel Back Control the touch back function of the receiver unit allows finger gestures/controls on a large touch screen to be sent back wirelessly to a Windows PC · Integrated Whiteboard the main menu of the receiver provides a whiteboard function and in combination with a touchscreen, allows quick notes during the meeting, the presentation directly on the display. · Supports Windows, macOS, iOS, iPadOS, Android. · Expandable with additional HDMI transmitters - DS-55322 1 3. Package Content DS-55317: 1x Receiver unit 2x HDMI transmitter 1x USB charging adapter (10W, 5V/2A) 1x Storage tray for HDMI transmitter 1x Micro USB cable, 1.5 m 1x HDMI cable, 1.15 m 2x Graphics adapter (HDMI, jack - USB-CTM, plug) 2x USB adapter (USB-A, jack - USB-CTM, plug) 1x User manual PC Requirements: DS-55317 supports devices with an HDMI port. It supports Windows and macOS PC systems. In case your PC doesn't have an HDMI port (i.e. just equipped with USB-CTM ports), you can use an video adapter or docking station with HDMI interface. Smartphone/Tablet Requirements To share from smartphone/tablet video to DS-55317, please ensure the devices meet the following requirements: iOS 9.0 or above / iPadOS 13 or above Android 5.0 or above 2 4. Product Specification 0BFeature Video input 1B Video decode and output 5B Audio 7B Wireless standard 9B Latency 1B HDMI Version 13B Authentication Protocol 15B Security 17B Platform supported 19B Distance 21B 23BTransmitter Cable 24B Status LED 26B Switch button 28B Power supply 30B Power Consumption 32B Dimension 34B Weight 36B Rec 38B eiver Interfaces 39B Status LED 41B Power supply 43B Power Consumption 45B Dimension 47B Weight 49B 51BTemperature Range Operating: 52B Storage: 54B Humidity Operating: 57B Storage: 59B 1920x1080 2B (1080p60/50/30/25/24, 1080i60/50) 1280x720(720p60/50) 3B 720×576(576p50);720×480(480p60) 4B Up to 4K60 (RX) 6B Stereo, 48KHz 8B IEEE 802.11b/g/n/ac, 2.4G/5GHz, 2T2R 10B About 100ms latency 12B HDMI 2.0 (RX) with HDCP2.1 14B WPA2 (WPAS-PSK / WPA2-Enterprise) 16B AES 128 bit 18B Windows, macOS, iOS, iPadOS, Android 20B Up to 50 meters (in the clear line of sight) 2B USB cable, HDMI cable 25B 1x 27B 1x 29B DC 5V/0.5A 31B About 2.5W 3B 80 x 80 x 14 mm 35B 80 g 37B 2x USB-A, in, 1x Micro USB, 1x RJ45, 1x HDMI 40B 1x 42 DC 5V/2A 4B About 10W 46B 85 x 104 x 23mm 48B 305 g 5B 0°C to + 40°C (+32°F to +104°F) 53B -10°C to + 60°C (+14°F to +140°F) 5B 10% to 80% relative humidity 58B 5% to 90% relative humidity 60B 3 5. Product Overview Transmitter 1 HDMI® Type A 61B 62B Connect computer or other devices with HDMI 63B 2 USB 2.0 Type A 64B 65B Connect to computer or other devices 6B for power 3 67B Connection button 68B Share button with LED indicator: Press to start 69B sharing Status indicator 71B 4 (Indicate different 70B Static and flashing red: TX is booting on 106B Flashing blue: Waiting for connection 107B Static blue: Connected and start 108B statue) to presenting Flashing purple: No video input 109B 4 Receiver 1 Micro USB 2.0, B 72B 73B Connect to 5V/2A adapter for power supply 74B 2 2x USB 2.0, A 75B 76B Connect with touch panel or mouse/keyboard 7B for KVM function 3 HDMI®, A 78B 79B Connect to TV, projector, and monitor by using 80B the HDMI cable 4 RJ45 (Fast Ethernet) Connect to router/network for internet access 81B 82B 83B 5 Status indicator 84B 85B Flashing blue: Waiting for connection 86B Static blue: Connected with TX 87B 5 6. Connection Diagram Transmitter 8B Receiver 89B 1 Smartphone/ Tablet 90B 91B 2 Laptop 94B 95B 3 98B 50 9B5 m max. distance 4 Power supply 102B 103B 5 Network Connection 92B 93B 6 Mouse 96B 97B 7 Keyboard 10B 10B 8 TV / Beamer 104B 105B 6 7. Receiver Installation 1. Power on the RX via USB power adapter and connect it to the display or projector by HDMI cable 2. Connect the USB cable to the display by USB cable (for touch panel control only) 3. Connect RJ45 cable to your RX to access the internet. Remark: Please ignore step 2 if the display doesn't have a touch panel Please ignore step 3 if no need to access the internet 7.1 Receiver Settings: In the bottom right of receiver main page, it's (Setting) function: 7 Settings Click to enter setting page: 1) General Setup: user can select the language and check product version 2) Group Setup: user can adjust information shown while Multi-User Mode 3) Advanced Setup: SSID Name: set the SSID Name Wi-Fi Password: set the SSID password HDMI Zoom: adjust the HDMI output size HDMI Resolution: set the HDMI output resolution 8 7.2 Multi Transmitter (TX) Management: When set to ON, the user logos and number of participants which are connected to the RX will be shown on the upper right corner of the main page of RX start screen Click logo, the TX (participants) list will be show on the display. The TX list will be hided when click again. It's easy for the meeting moderator to control each TX on the big screen 9 10 8. Pairing a Transmitter (TX) and Receiver (RX) The Wireless Collaboration System (DS-55317) includes 1x Receiver (RX) and 2x Transmitter (TX) units, which are paired already together. Normally you don't need to pair them again. However, if you need to re-pair or buy an additional Transmitter (DS-55322), you need to follow the instruction below to pair the new transmitter with the receiver. 1. Power on the Receiver (RX) and connect it with the display, please make sure to use USB Power Adapter for the RX 2. Connect the USB cable (USB-A plug) of the Transmitter (TX) to the USB-A port of the Receiver 3. Wait around 15 seconds, the button light of TX will turn to constant blue from red light, and "pairing successful" message will be displayed on the RX screen Remark: Repeat the process if needed 9. TX and RX Software Upgrade Guide: The TX and RX already coming with the latest software, you don't need to upgrade them. In case there will be any software update released in the future, please follow below upgrade guide for software update. Please always upgrade TX firstly before you upgrade RX. 11 9.1 TX upgrade process: 1) Firstly, please make sure TX and RX already paired 2) Unzip the upgrade package, and copy "tx_image, tx_config.txt" file on the root of a Udisk/Memory stick (Fat32) 3) Connect the Udisk/Memory stick with RX USB port and then power on the RX 4) After RX enter the main page, power on TX (no need to connect the HDMI cable), then the TX will link with RX automatically 5) Then RX will send the upgrade file to TX for upgrade wirelessly, upgrade message will show on the RX screen. During the upgrade process, the TX Red and blue lights will flash alternately. 12 6) After upgrade down, the TX light will become flash blue, and "TX updated OK" message will display on the RX screen. 7) After the upgrade, please pair TX and RX again. (Please refer to TX and RX pair guide) 13 9.2 RX upgrade process: 1) Change the RX upgrade zip file's name to "update".zip (no need to unzip the file) and copy to the root of USB disk. 2) Connect the U disk with RX USB port and then power on the RX. 3) The RX will recognize the firmware and update message will be displayed on the screen, please click install for upgrade. 4) Then the RX will restart for upgrade. 14 5) After RX update successfully, message will be displayed on the screen, you can chose to save or delete the file. 15 10. Wireless HDMI Transmitter (TX) Installation 1) Connect the HDMI and USB plug to the notebook's inputs. 2) The LED indicator of the TX will turn red when it's booting up. 3) The LED indicator will become blue and flashing when the TX is ready to stream. 4) The LED indicator will become constant blue when click the button to start presenting. 16 11. Streaming from Smartphone/Tablet 1. iOS devices · Search RX (Receiver) SSID and connect in Wifi settings. (SSID: DIGITUS..., Password: 12345678), the is SSID shown on the left upper corner of the RX start screen · Use the screen mirroring function of the smartphone · Choose RX (Receiver) DIGITUS-... to start sharing Remark: if the RX already connect with your office network, and the iOS devices are in the same network, in this case, it's no need for the iOS devices to connect with the RX SSID first 17 2. Android devices · Make sure your android devices Wi-Fi is activated/available · Go to the Mirror/Share/Cast function of the smartphone · Choose RX (Receiver) DIGITUS-... to start sharing Remark: there are different names on different brands of phones or tablets: WIFI Display, WLAN Display, Wireless Display, Allshare Display, Allshare Cast, Wireless Display, MirriorShare, etc. 12. Multi-User Application & Multi- / Split-Screen Mode 1. Single-Screen Mode: If there is one Transmitter (TX), press the button on TX shortly, the 18 screen of the notebook will be shared to the big screen If there are two or more Transmitter, just click the button of the TX you want to share on your big screen. You can easily switch between various TX by pressing the button of the corresponding TX easy click & share. If you want to share content from a Smartphone or Tablet, please follow the streaming process described before on 11. "Streaming from Smartphone/Tablet" Remark: If a HDMI Transmitter (TX) is connected with the HDMI Receiver (RX), please unpair the TX and the RX by press the button on TX first, start screen will be shown. Then you can connect a mobile device. Priority is HDMI Transmitter (TX) before mobile device (smartphone/tablet). 2. Multi-Screen / Split-Screen Mode: Remark: Android devices don't support multi-screen mode 19 Only Wireless HDMI Transmitter (TX) in Split Screen | up to 4 Notebooks 1) Please connect the first Transmitter with the Receiver by short press the button on Transmitter, you will see the content of first TX on the big screen 2) To share the second Transmitter, please press the button on the second TX and hold it for 3-5 seconds, the Receiver screen will split to MultiScreen / Split-Screen Mode you will see content of both TX on the big screen 3) To add the third and fourth TX, please repeat the process, hold the button of the TX you want to add/share Wireless HDMI Transmitter (TX) and iOS Smartphone/Tablet in Split Screen Example 1): 1x Wireless HDMI Transmitter (TX) + 1x iOS Mobile Device 1) Please connect first the Mobile Device with the Receiver (connect to RX SSID as explained before under 11.), then use screen mirroring function of the mobile device, you will see the content of the device on the big screen 2) To add now the Wireless HDMI Transmitter (notebook) to the Receiver screen, please press the button on the TX and hold it for 3-5 seconds, the Receiver screen will split to Multi-Screen / Split-Screen Mode you will see content of Mobile Device & TX on the big screen Example 2): 2x Wireless HDMI Transmitter (TX) + iOS Mobile Device 1) Please connect the first Transmitter with the Receiver by short press the button on Transmitter, you will see the content of first TX on the big screen 2) To share the second Transmitter, please press the button on the second TX and hold it for 3-5 seconds, the Receiver screen will split to MultiScreen / Split-Screen Mode you will see content of both TX on the big screen 3) Please connect then the Mobile Device with the RX (connect to RX SSID as explained before under 11.), then use screen mirroring function of the mobile device. The RX screen will split into 4-screen split and you will see 20 the content of the 2x TX and the Mobile Device on the big /RX) screen Remark: · If you now want to add a second Mobile Device, just repeat the steps for sharing Mobile Device on point 3) · If you now want to add a third TX, just repeat the steps for Wireless HDMI Transmitter on point 2) In the multi-screen mode, if you use iOS devices, please ensure that your iOS devices are connected to the RX first. Please follow the streaming process described before on 11. "Streaming from Smartphone/Tablet iOS Devices" 3. How to quit multiple screens split mode: Click any Wireless HDMI TX button shortly to switch to one single screen mode 13. Multicast or Display Group Setup In the group mode, where video transmission from one transmitter is addressed to a group of receivers simultaneously Step 1: Connect different RX with same router to make sure the different receivers in the same subnet 21 Step 2: Please click into the settings of the main Receiver (RX) and select the Display Group Setup Step3: Turn on Display Group function, all the receivers which are in the same subnet will be listed on the Device List, please select the receivers which you want to join the display group and confirm, then the screen will stream to other receivers 22 14. Touch Panel Control: DS-55317 supports touch panel back control function when connecting with a touch screen/panel. User can touch the big screen to control the PC easily Step 1: Connect the Receiver (RX) via HDMI cable with the display (touch panel) and use a USB cable to connect your display to the USB-A Port of the RX for touch back control Step 2: Connect the Transmitter (TX) with your PC via HDMI/USB cable Step 3: Touch the display to control the PC Remark: macOS devices don't support touch back control function. 15. White Board Function: DS-55317 supports instantly edit, draw and write on the big screen with touch panel Step 1: Click the White Board icon from the start screen of the RX on the to enter the white board function Step 2: You will find white board function at the left side of the main menu, click the pen icon to enter to white board mode, now you can write, draw, edit on the display Remark: If you are using a regular TV (without touch panel) you can use the white board function by connecting a PC mouse to the USB-A port of the RX 23 24 Frequency Range & Maximum Transmit Power WiFi Standard: 802.11b/g/n/ac 5G WiFi Channel: 36, 40 Core Frequency: 5180, 5200 Range: 5170 ~ 5210MHz Bandwidth: 20/40MHz Transmitter power: 13 dBm max SW version: RX: v2.3.13, TX: v2.3.4 HW version: TX: S200TX-LC01-01 RX: G300RX-LC01-01 Important safety instructions Please read the following safety instructions carefully before installation and operation: 1. Observe all warnings and instructions concerning this device 2. Do not expose the device to rain, moisture, vapors or liquids 3. Do not insert any objects into the device 4. Do not attempt to repair the unit yourself or open the cabinet. Risk of electric shock! 5. Ensure adequate ventilation to prevent damage due to overheating 6. Turn off the power supply and make sure the environment is safe before installation 7. In the event of thunderstorms, there is a risk of lightning strike and damage to connected electrical equipment due to overvoltage 8. Do not install this device during a thunderstorm 9. Disconnect the device from the connected electrical appliances during a thunderstorm 10. Use the device inside buildings only 11. Return the device to your dealer in case of repair 12. Dust, moisture, vapors and strong cleaning agents or solvents can damage the device 13. Disconnect the device from the power supply and the connected devices before cleaning 25 14. Clean the device with a lint-free cloth 15. To completely disconnect the system from the mains, the power supply unit must be unplugged from the socket. The power supply unit serves as a disconnecting device for separating the system from the mains. Disclaimer The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address. www.assmann.com Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany 26