Cloud Install
Customer Service - QNAP
QNAP (US) | Experts in NAS, Networking, and Smart SurveillanceDownload Center | QNAP (US)
Installation Guide for QNAP models including: QHora-322, Next-Generation Three-port 10GbE SD-WAN Router, Three-port 10GbE SD-WAN Router, Next-Generation 10GbE SD-WAN Router, 10GbE SD-WAN Router, Router
QNAP QHora-322 ab € 677,80 (2023) | Preisvergleich Geizhals Österreich
QNAP QHora-322 Router - Interdiscount
File Info : application/pdf, 40 Pages, 2.92MB
DocumentDocumentQHora-322 Quick Installation Guide
QHora Series
www.qnap.com
QHora Series
13 24
QHora-322 Front Panel LEDs
QHora Series
LED 1 Power
Status
Yellow-green
Off Flashes yellow-green every 1 second along with the system status LED
Orange
Description
The router is powered on. The router is powered off. A system error occurred.
The router has powered up and initialized.
Flashes orange every 1 second The router is being initialized.
2 System Status
QuWAN
3 Orchestrator Status
Flashes orange every 2 seconds
Flashes orange every 1 second along with the power LED
Off
Blue-green Flashes blue-green every 0.5 seconds Flashes blue-green every 2 seconds Off
White
4
Auto-mesh Connection Status
Flashes white every 2 seconds
Off Note: The front panel LEDs will turn on during the reset process.
The firmware is being updated.
A system error occurred.
The router is powered off.
The router has joined the QuWAN Orchestrator topology and is connected to the SD-WAN network. The router is joining the QuWAN Orchestrator SDWAN network. The router has lost connection to the QuWAN Orchestrator SD-WAN network. The router is not part of the QuWAN Orchestrator SD-WAN network. Connected: All the mesh VPN tunnels established by the device on the QuWAN Orchestrator SDWAN network are accessible. Partially connected: Few of the mesh VPN tunnels established by the router on the QuWAN Orchestrator SD-WAN network are inaccessible. The router is not part of the QuWAN Orchestrator SD-WAN network.
QHora-322 Rear Panel LEDs
7
9
5
6
8
GREEN=LAN
WAN
AMBER=WAN
1
2
3
4
5
6
1
2
3
DC IN USB
2.5G
Reset 10G
Wide Area Network (WAN) and Local Area Network (LAN) LEDs
QHora-322 assigns the default WAN interface role
5 to 2.5 GbE port number 1. The following LED status indicates the network port role:
WAN interface - Orange LAN interface - Green
LED
Status
2.5 Gigabit
6 Ethernet LED (2.5 Gbps speed)
Green Flashes green Off
Orange
2.5 Gigabit
7
Ethernet LED (1 Gbps or 100 Mbps
Flashes orange
speed)
Off
Green
10 Gigabit Ethernet
8 LED (10 Gbps
Flashes green
speed)
Off
Orange
10 Gigabit Ethernet
9
LED (5 Gbps, 2.5 Gbps, 1 Gbps, or
Flashes orange
100 Mbps speed)
Off
Description
The network connection is operating at 2.5 Gbps.
Data is being transmitted.
There is no network connection. The network connection is operating at 1 Gbps or 100 Mbps. Data is being transmitted.
There is no network connection. The network connection is operating at 10 Gbps. Data is being transmitted. There is no network connection. The network connection is operating at 5 Gbps, 2.5 Gbps, 1 Gbps, or 100 Mbps speed. Data is being transmitted.
There is no network connection.
13 24
QHora-322 LED
QHora Series
LED 1
1 LED
1
2
2
1 LED
3
QuWAN Orchestrator
0.5
2
4
2
LED
QuWAN Orchestrator SD-WAN QuWAN Orchestrator SD-WAN QuWAN Orchestrator SD-WAN QuWAN Orchestrator SD-WAN QuWAN Orchestrator SD-WAN VPN QuWAN Orchestrator SD-WAN VPN QuWAN Orchestrator SD-WAN
QHora-322 LED
7
9
5
6
8
GREEN=LAN
WAN
AMBER=WAN
1
2
3
4
5
6
1
2
3
DC IN USB
2.5G
Reset 10G
(WAN) (LAN) LED
5
QHora-322 WAN 2.5 GbE 1 LED
WAN - LAN -
LED
6
2.5 Gb LED 2.5 Gbps
2.5 Gb LED
7 1 Gbps 100
Mbps
8
10 Gb LED 10 Gbps
10 Gb LED
9
5 Gbps2.5 Gbps1 Gbps
100 Mbps
2.5 Gbps 1 Gbps 100 Mbps 10 Gbps 5 Gbps2.5 Gbps1 Gbps 100 Mbps
LED du panneau avant QHora-322
13 24
QHora Series
LED 1 Alimentation
État
Jaune-vert
Désactivé Clignote en jaune-vert toutes les secondes avec la LED d'état du système
Orange
Description
Le routeur est sous tension. Le routeur est hors tension. Une erreur système est survenue.
Le routeur s'est allumé et initialisé.
2 État du système
Clignote en orange toutes les secondes
Clignote en orange toutes les 2 secondes
Clignote en orange toutes les secondes avec la LED d'alimentation
Le routeur est en cours d'initialisation. La mise à jour du firmware est en cours. Une erreur système est survenue.
Désactivé
Le routeur est hors tension.
3
État de QuWAN Orchestrator
État de la
4 connexion automesh
Bleu-vert Clignote en bleu-vert toutes les demi-secondes Clignote en bleu-vert toutes les 2 secondes Désactivé
Blanc
Clignote en blanc toutes les 2 secondes
Désactivé
Le routeur a rejoint la topologie de QuWAN Orchestrator et est connecté au réseau SD-WAN.
Le routeur rejoint le réseau SD-WAN de QuWAN Orchestrator.
Le routeur a perdu la connexion au réseau SDWAN de QuWAN Orchestrator.
Le routeur ne fait pas partie du réseau SD-WAN de QuWAN Orchestrator.
Connecté : Tous les tunnels VPN mesh établis par l'appareil sur le réseau SD-WAN de QuWAN Orchestrator sont accessibles
Partiellement connecté : Quelques-uns des tunnels VPN mesh établis par le routeur sur le réseau SDWAN de QuWAN Orchestrator sont inaccessibles.
Le routeur ne fait pas partie du réseau SD-WAN de QuWAN Orchestrator.
Remarque : Les LED du panneau avant s'allumeront pendant le processus de réinitialisation.
LED du panneau arrière QHora-322
7
9
5
6
8
GREEN=LAN
WAN
AMBER=WAN
1
2
3
4
5
6
1
2
3
DC IN USB
2.5G
Reset 10G
LED du Réseau étendu (WAN) et du Réseau local (LAN)
QHora-322 attribue le rôle d'interface WAN par
Interface WAN - Orange
5 défaut au numéro de port 1 2,5GbE. L'état suivant de
la LED indique le rôle du port réseau :
Interface LAN - Vert
LED
État
Vert
LED du 2,5 Gigabit
6 Ethernet (vitesse
Clignote en vert
2,5 Gbit/s)
Désactivé
Orange
LED du 2,5 Gigabit
7
Ethernet (vitesse 1 Gbit/s ou 100
Clignote en orange
Mbit/s)
Désactivé
Vert LED du 10 Gigabit
8 Ethernet (vitesse 10 Clignote en vert Gbit/s) Désactivé
Orange
LED du 10 Gigabit
9
Ethernet (vitesse 5/2,5/1 Gbit/s ou
Clignote en orange
100 Mbit/s)
Désactivé
Description
La connexion réseau fonctionne à 2,5 Gbit/s.
Les données sont transmises.
Il n'y a pas de connexion réseau. La connexion réseau fonctionne à 1 Gbit/s ou 100 Mbit/s. Les données sont transmises.
Il n'y a pas de connexion réseau. La connexion réseau fonctionne à 10 Gbit/s. Les données sont transmises. Il n'y a pas de connexion réseau. La connexion réseau fonctionne à 5/2,5/1 Gbit/s ou 100 Mbit/s. Les données sont transmises.
Il n'y a pas de connexion réseau.
QHora-322 LEDs an der Vorderseite
13 24
QHora Series
LED 1 Betriebszustand
Status
Gelb-Grün Aus Blinkt jede Sekunde zusammen mit der System Status LED gelbgrün
Orange
Blinkt jede Sekunde orange
Beschreibung
Der Router ist eingeschaltet. Der Router ist ausgeschaltet.
Es ist ein Systemfehler aufgetreten.
Der Router ist hochgefahren und initialisiert worden. Der Router wird initialisiert.
2 Systemstatus
Blinkt alle 2 Sekunden orange
Blinkt jede Sekunde zusammen mit der Betriebsanzeige-LED orange
Aus
Blau-Grün
Blinkt alle 0,5 Sekunden
3
QuWAN
blaugrün
Orchestrator Status
Blinkt alle 2 Sekunden blaugrün
Aus
Weiß
4
Auto-Mesh Verbindungsstatus Blinkt alle 2 Sekunden weiß
Aus Hinweis: Die LEDs an der Vorderseite leuchten beim Zurücksetzen.
Die Firmware wird gerade aktualisiert.
Es ist ein Systemfehler aufgetreten.
Der Router ist ausgeschaltet.
Der Router wurde in die QuWAN Orchestrator Topologie eingebunden und ist mit dem SD-WAN Netzwerk verbunden. Der Router verbindet sich mit dem SD-WAN Netzwerk von QuWAN Orchestrator. Der Router hat die Verbindung zum SD-WAN Netzwerk von QuWAN Orchestrator verloren. Der Router ist nicht Teil des QuWAN Orchestrator SD-WAN Netzwerks. Verbunden: Alle der vom Router im QuWAN Orchestrator SD-WAN Netzwerk aufgebauten Mesh VPN Tunnel sind erreichbar. Teilweise verbunden: Einige der vom Router im QuWAN Orchestrator SD-WAN Netzwerk aufgebauten Mesh VPN Tunnel sind nicht erreichbar. Der Router ist nicht Teil des QuWAN Orchestrator SD-WAN Netzwerks.
QHora-322 LEDs an der Rückseite
7
9
5
6
8
GREEN=LAN
WAN
AMBER=WAN
1
2
3
4
5
6
1
2
3
DC IN USB
2.5G
Reset 10G
Wide Area Network (WAN) und Local Area Network (LAN) LEDs
QHora-322 weist die Standard WAN Schnittstellenrolle WAN Schnittstelle - Orange
5 der 2,5 GbE Portnummer 1 zu. Der folgende LED-Status
zeigt die Rolle des Netzwerkanschlusses an:
LAN Schnittstelle - Grün
LED
Status
2,5 Gigabit
6
Ethernet LED (2,5 Gbps
Geschwindigkeit)
Grün Blinkt grün Aus
2,5 Gigabit Ethernet LED
7 (1 Gbps oder 100 Mbps Geschwindigkeit)
Orange Blinkt orange Aus
Grün
10 Gigabit Ethernet
8 LED (10 Gbps
Blinkt grün
Geschwindigkeit)
Aus
10 Gigabit Ethernet Orange
LED (5 Gbps, 2,5
9 Gbps, 1 Gbps
Blinkt orange
oder 100 Mbps
Geschwindigkeit)
Aus
Beschreibung
Die Netzwerkverbindung wird mit 2,5 Gbps betrieben. Daten werden übertragen.
Es gibt keine Netzwerkverbindung. Die Netzwerkverbindung wird mit 1 Gbps oder 100 Mbps betrieben. Daten werden übertragen.
Es gibt keine Netzwerkverbindung. Die Netzwerkverbindung wird mit 10 Gbps betrieben. Daten werden übertragen.
Es gibt keine Netzwerkverbindung. Die Netzwerkverbindung wird mit 5 Gbps, 2,5 Gbps, 1 Gbps oder 100 Mbps betrieben.
Daten werden übertragen.
Es gibt keine Netzwerkverbindung.
LED pannello anteriore QHora-322
13 24
QHora Series
LED 1 Alimentazione
Stato
Giallo-verde
Disattivo Lampeggia di giallo-verde ogni secondo insieme al LED di stato del sistema
Arancione
Descrizione
Il router è acceso. Il router è spento. Si è verificato un errore con il sistema.
Il router è alimentato e inizializzato.
2 Stato del sistema
Lampeggia di arancione ogni 1 sec
Lampeggia di arancione ogni 2 sec
Lampeggia di arancione ogni secondo insieme al LED di accensione
Il router è in fase di inizializzazione. Il firmware è in fase di aggiornamento. Si è verificato un errore con il sistema.
Disattivo
Il router è spento.
Blu-verde
Il router è stato unito alla topologia QuWAN Orchestrator ed è collegato alla rete SD-WAN.
3
Stato QuWAN Orchestrator
Lampeggia di blu-verde ogni 0,5 sec
Lampeggia di blu-verde ogni 2 sec
Il router si sta unendo alla rete SD-WAN di QuWAN Orchestrator.
Il router ha perso il collegamento con la rete SDWAN di QuWAN Orchestrator.
Disattivo
Il router non è parte della rete SD-WAN di QuWAN Orchestrator.
Bianco
Connesso: Tutti i tunnel mesh VPN stabiliti dal dispositivo sulla rete SD-WAN di QuWAN Orchestrator sono accessibili.
4
Stato collegamento
auto mesh
Lampeggia di bianco ogni 2 sec
Parzialmente connesso: Alcuni tunnel mesh VPN stabiliti dal router sulla rete SD-WAN di QuWAN
Orchestrator non sono accessibili.
Disattivo
Il router non è parte della rete SD-WAN di QuWAN Orchestrator.
Nota: Durante il processo di ripristino si illuminano i LED sul pannello anteriore.
LED pannello posteriore QHora-322
7
9
5
6
8
GREEN=LAN
WAN
AMBER=WAN
1
2
3
4
5
6
1
2
3
DC IN USB
2.5G
Reset 10G
LED WAN (Wide Area Network) e LAN (Local Area Network)
QHora-322 assegna lo slot interfaccia WAN predefinito Interfaccia WAN - Arancione
5 alla porta 2,5 GbE numero 1. I seguenti stati del LED
indicano il ruolo della porta di rete:
Interfaccia LAN - Verde
LED
Stato
Verde
LED 2,5 Gigabit
6
Ethernet (velocità
Lampeggia verde
2,5 Gbps)
Disattivo
Arancione
LED 2,5 Gigabit
7
Ethernet (velocità 1 Lampeggia di arancione
Gbps o 100 Mbps)
Disattivo
Verde
LED 10 Gigabit
8
Ethernet (velocità
Lampeggia verde
10 Gbps)
Disattivo
Arancione
LED 10 Gigabit
9
Ethernet (velocità 5 Gbps, 2,5 Gbps, 1
Lampeggia di arancione
Gbps, o 100 Mbps)
Disattivo
Descrizione
La connessione di rete è in uso a 2,5 Gbps.
Dati in trasmissione.
Nessuna connessione di rete. La connessione di rete è in uso a 1 Gbps o 100 Mbps. Dati in trasmissione.
Nessuna connessione di rete. La connessione di rete è in uso a 10 Gbps. Dati in trasmissione. Nessuna connessione di rete. La connessione di rete è in uso alla velocità 5 Gbps, 2,5 Gbps, 1 Gbps, o 100 Mbps. Dati in trasmissione.
Nessuna connessione di rete.
QHora-322 LEDs
13 24
QHora Series
LED 1
- LED 1
1
2
2
LED 1
-
QuWAN
0.5 -
3 Orchestrator
2 -
4
2
LED
QuWAN Orchestrator SD-WAN QuWAN Orchestrator SD-WAN QuWAN Orchestrator SD-WAN QuWAN Orchestrator SD-WAN QuWAN Orchestrator SD-WAN VPN QuWAN Orchestrator SD-WAN VPN QuWAN Orchestrator SD-WAN
QHora-322 LEDs
7
9
5
6
8
GREEN=LAN
WAN
AMBER=WAN
1
2
3
4
5
6
1
2
3
DC IN USB
2.5G
Reset 10G
(WAN) (LAN) LEDs
5
QHora-322 2.5GbE 1 WAN LED
WAN - LAN -
LED
2.5
6 LED2.5 Gbps
2.5
7
LED1 Gbps 100
Mbps
10
8 LED10 Gbps
10
LED
9 5Gbps
2.5Gbps1Gbps
100Mbps
2.5 Gbps
1 Gbps 100 Mbps
10 Gbps 5Gbps2.5Gbps1Gbps 100Mbps
13 24
QHora-322 LED
QHora Series
LED 1
LED 1
. . .
.
1
.
2
2
.
LED 1
.
3
QuWAN Orchestrator
0.5 2
4
2
: LED .
.
QuWAN Orchestrator SD-WAN .
QuWAN Orchestrator SD-WAN .
QuWAN Orchestrator SD-WAN .
QuWAN Orchestrator SD-WAN .
: QuWAN Orchestrator SD-WAN VPN .
: QuWAN Orchestrator SD-WAN VPN .
QuWAN Orchestrator SD-WAN .
QHora-322 LED
7
9
5
6
8
GREEN=LAN
WAN
AMBER=WAN
1
2
3
4
5
6
1
2
3
DC IN USB
2.5G
Reset 10G
(WAN) (LAN) LED
QHora-322 2.5 GbE 1 WAN WAN -
5 . LED
.
LAN -
LED
6
2.5 LED(2.5Gbps )
2.5
7 LED(1Gbps 100Mbps )
8
10 LED(10Gbps )
10
9
LED(5Gbps, 2.5Gbps, 1Gbps
100Mbps )
2.5Gbps .
.
. 1Gbps 100Mbps . .
. 10Gbps . . . 5Gbps, 2.5Gbps, 1Gbps 100Mbps . .
.
Diody LED na przednim panelu QHora-322
13 24
QHora Series
LED 1 Zasilanie
Status
ólto-zielona Wyl. Miga na ólto-zielono co sekund wraz z diod LED stanu systemu Pomaraczowa
Opis
Router jest wlczony. Router jest wylczony. Wystpil bld systemu.
Router zostal wlczony i zainicjowany.
2 Status systemu
Miga na pomaraczowo co sekund Miga na pomaraczowo co 2 sekundy Miga na pomaraczowo co sekund wraz z diod LED zasilania
Router jest inicjowany. Trwa aktualizacja oprogramowania ukladowego. Wystpil bld systemu.
Wyl.
Router jest wylczony.
Stan urzdzenia
3 QuWAN Orchestrator
4
Stan polczenia sieci Auto-mesh
Niebiesko-zielona Miga na niebiesko-zielono co 0,5 sekundy Miga na niebiesko-zielono co 2 sekundy Wyl.
Bialy
Miga na bialo co 2 sekundy
Wyl.
Router polczyl si z topologi urzdzenia QuWAN Orchestrator i jest podlczony do sieci SD-WAN. Router lczy si z sieci SD-WAN urzdzenia QuWAN Orchestrator. Router utracil polczenia z sieci SD-WAN urzdzenia QuWAN Orchestrator. Router nie jest czci sieci SD-WAN urzdzenia QuWAN Orchestrator. Polczono: Dostpne s wszystkie tunele sieci VPN Mesh ustanowione przez urzdzenie w sieci SD-WAN QuWAN Orchestrator. Czciowo polczono: Kilka tuneli sieci VPN Mesh ustanowionych przez urzdzenie w sieci SD-WAN QuWAN Orchestrator jest niedostpnych. Router nie jest czci sieci SD-WAN urzdzenia QuWAN Orchestrator.
Uwaga: Podczas procesu resetowania zapal si diody LED na przednim panelu.
Diody LED na tylnym panelu QHora-322
7
9
5
6
8
GREEN=LAN
WAN
AMBER=WAN
1
2
3
4
5
6
1
2
3
DC IN USB
2.5G
Reset 10G
Diody LED sieci WAN (ang. Wide Area Network) i LAN (ang. Local Area Network)
QHora-322 przypisuje domyln rol interfejsu WAN
5 do portu 2,5 GbE nr 1. Rol portu sieciowego okrelaj
ponisze stany diod LED:
Interfejs WAN pomaraczowa Interfejs LAN zielona
LED
Status
Zielony
Dioda LED Ethernet
6 2,5 Gigabit
Miga na zielono
(szybko 2,5 Gb/s)
Wyl.
Pomaraczowa
Dioda LED Ethernet
7
2,5 Gigabit (szybko 1 Gb/s
Miga na pomaraczowo
lub 100 Mb/s)
Wyl.
Zielony
Dioda LED
8 Ethernet 10 Gigabit Miga na zielono (szybko 10 Gb/s) Wyl.
Dioda LED
Pomaraczowa
Ethernet 10 Gigabit
9 (szybko 5 Gb/s,
Miga na pomaraczowo
2,5 Gb/s, 1 Gb/s lub
100 Mb/s)
Wyl.
Opis
Polczenie z sieci dziala z szybkoci 2,5 Gb/s.
Trwa transfer danych.
Brak polczenia z sieci. Polczenie z sieci dziala z szybkoci 1 Gb/s lub 100 Mb/s. Trwa transfer danych.
Brak polczenia z sieci. Polczenie z sieci dziala z szybkoci 10 Gb/s. Trwa transfer danych. Brak polczenia z sieci. Polczenie z sieci dziala z szybkoci 5 Gb/s, 2,5 Gb/s, 1 Gb/s lub 100 Mb/s. Trwa transfer danych.
Brak polczenia z sieci.
Indicadores LED del panel frontal del QHora-322
13 24
QHora Series
LED 1 Alimentación
Estado
Descripción
Amarillo-verde
El router está encendido.
Apagado
Parpadea en amarillo-verde cada 1 segundo junto con el indicador LED del estado del sistema
El router está apagado. Se ha producido un error del sistema.
Naranja
El router se ha encendido e inicializado.
Parpadea en naranja cada 1 segundo
El router se está inicializando.
2
Parpadea en naranja cada 2 Estado del sistema segundos
El firmware se está actualizando.
Parpadea en naranja cada 1 segundo junto con el indicador LED de alimentación
Se ha producido un error del sistema.
Apagado
El router está apagado.
Azul-verde
El router se ha unido a la topología de QuWAN Orchestrator y está conectado a la red de SD-WAN.
Parpadea en azul-verde cada 0,5 El router se está uniendo a la red SD-WAN de
3
Estado de QuWAN Orchestrator
segundos Parpadea en azul-verde cada 2
QuWAN Orchestrator. El router ha perdido la conexión con la red SD-
segundos
WAN de QuWAN Orchestrator.
Apagado
El router ahora no forma parte de la red SD-WAN de QuWAN Orchestrator.
Blanco
Estado de la
4
conexión de malla Parpadea en blanco cada 2
automática
segundos
Conectado: Se puede acceder a todos los túneles VPN de malla establecidos por el dispositivo en la red SD-WAN de QuWAN Orchestrator.
Conectado parcialmente: No se puede acceder a algunos túneles VPN de malla establecidos por el router en la red SD-WAN de QuWAN Orchestrator.
Apagado
El router ahora no forma parte de la red SD-WAN de QuWAN Orchestrator.
Nota: Los LED del panel frontal se encenderán durante el proceso de restablecimiento.
Indicadores LED del panel trasero del QHora-322
7
9
5
6
8
GREEN=LAN
WAN
AMBER=WAN
1
2
3
4
5
6
1
2
3
DC IN USB
2.5G
Reset 10G
Indicadores LED de la red de área amplia (WAN) y de la red de área local (LAN).
QHora-322 asigna el rol de interfaz WAN predeterminado Interfaz WAN - Naranja
5 al número de puerto 2,5 GbE 1. El siguiente estado del
LED indica el rol del puerto del red:
Interfaz LAN - Verde
LED
Estado
Verde Indicador LED de
6 2,5 GbE (velocidad Parpadea en verde de 2,5 Gbps) Apagado
Naranja
Indicador LED de
7
2,5 GbE (velocidad de 1 Gbps o 100
Parpadea en naranja
Mbps)
Apagado
Verde
Indicador LED de 10
8
GbE (velocidad de
Parpadea en verde
10 Gbps)
Apagado
Naranja
Indicador LED de 10
9
GbE (velocidad de 5 Gbps, 2,5 Gbps, 1
Parpadea en naranja
Gbps o 100 Mbps)
Apagado
Descripción
La conexión de red está funcionando a 2,5 Gbps.
Se están transmitiendo datos.
No hay ninguna conexión de red. La conexión de red está funcionando a 1 Gbps o 100 Mbps. Se están transmitiendo datos.
No hay ninguna conexión de red. La conexión de red está funcionando a 10 Gbps. Se están transmitiendo datos. No hay ninguna conexión de red. La conexión de red está funcionando a una velocidad de 5 Gbps, 2,5 Gbps, 1 Gbps o 100 Mbps. Se están transmitiendo datos.
No hay ninguna conexión de red.
LED QHora-322
13 24
QHora Series
LED 1
-
- 1 LED
1
2
2 1 LED
3 QuWAN Orchestrator 4
-
QuWAN Orchestrator SD-WAN
- 0.5
QuWAN Orchestrator SD-WAN
- 2
QuWAN Orchestrator SD-WAN
QuWAN Orchestrator SD-WAN
: VPN
2
: VPN
QuWAN Orchestrator SD-WAN
: LED
LED QHora-322
7
9
5
6
8
GREEN=LAN
WAN
AMBER=WAN
1
2
3
4
5
6
1
2
3
DC IN USB
2.5G
Reset 10G
(WAN) LED (LAN)
5
QHora-322 WAN 2.5 GbE 1 LED
:
WAN - LAN -
LED
2.5
6
LED ( 2.5
Gbps)
2.5
7
LED ( 1
Gbps 100
Mbps)
8
10 LED ( 10
Gbps)
10
9
LED ( 5 Gbps, 2.5 Gbps,
1 Gbps 100
Mbps)
2.5 Gbps 1 Gbps 100 Mbps
10 Gbps 5 Gbps, 2.5 Gbps, 1 Gbps 100 Mbps
13 24
QHora-322 LED
QHora Series
LED 1
LED
1
2
2
LED
0.5
3
QuWAN Orchestrator
2
4
2
LED
QuWAN Orchestrator SD-WAN QuWAN Orchestrator SD-WAN QuWAN Orchestrator SD-WAN QuWAN Orchestrator SD-WAN QuWAN Orchestrator SDWAN VPN QuWAN Orchestrator SD-WAN VPN QuWAN Orchestrator SD-WAN
QHora-322 LED
7
9
5
6
8
GREEN=LAN
WAN
AMBER=WAN
1
2
3
4
5
6
1
2
3
DC IN USB
2.5G
Reset 10G
(WAN) (LAN) LED
5
QHora-322 WAN 2.5 GbE 1 LED
WAN
LED
2.5 Gigabit
6 LED 2.5 Gbps
2.5 Gigabit
7
LED 1 Gbps 100
Mbps
10 Gigabit
8 LED 10 Gbps
10 Gigabit
LED 5
9 Gbps2.5 Gbps
1 Gbps 100
Mbps
2.5 Gbps 1 Gbps 100 Mbps 10 Gbps 5 Gbps2.5 Gbps1 Gbps 100 Mbps
1
2
Port 2: Connect to PC
1
Port 1:
Connect to
Internet
2
Microsoft Edge / Mozilla Firefox 35+ / Apple Safari 10+ / Google Chrome 40+
a
http://192.168.100.1
b
QHora-322 Audio alert define
Duration
Long and short beeps Long beep
Short beep
Frequency
1 long and 2 short beeps
Description
The router is resetting configurations and rebooting (Press reset button for 10sec).
2 long beeps and 1 short beep The router has completed firmware update.
1
The router is starting up.
1
The router is resetting administrator account password(Press reset button for 5sec).
10 (every 1 minute)
The CPU is overheating. · Verify if the router is adequately ventilated and is placed in an open space. (Do not stack the router.) · The alert stops once the temperature is below the threshold limit.
QHora-322
1
1
10 1
10 5
CPU · ·
Définir les alertes audio QHora-322
Durée
Fréquence
Bips longs et brefs
1 bip long et 2 brefs 2 bips longs et 1 bref
Bip long
1
1
Bip court
10 (toutes les minutes)
Description
Le routeur réinitialise les configurations et redémarre (appuyez sur le bouton Reset pendant 10 sec.).
Le routeur a terminé la mise à jour du firmware.
Le routeur démarre.
Le routeur réinitialise le mot de passe du compte administrateur (appuyez sur le bouton Reset pendant 5 sec.).
Le processeur est en surchauffe. · Vérifiez si le routeur est correctement ventilé et s'il est placé dans un espace ouvert. (N'empilez pas le routeur avec d'autres objets.) · L'alerte s'arrête une fois la température redescendue sous le seuil limite.
QHora-322 Audioalarm Definition
Dauer
Lange und kurze Signaltöne Langer Signalton
Kurzer Signalton
Frequenz
Beschreibung
1 langer und 2 kurze Signaltöne
Der Router setzt Konfigurationen zurück und startet neu (ResetTaste 10 Sekunden lang drücken).
2 lange Signaltöne und 1 kurzer Signalton
Der Router hat die Firmware-Aktualisierung abgeschlossen.
1
Der Router fährt hoch.
1
Der Router setzt das Passwort des Administratorkontos zurück (Reset-Taste 5 Sekunden lang drücken).
10 ( jede Minute)
Die CPU ist überhitzt. · Überprüfen Sie, ob der Router ausreichend belüftet ist und in einem offenen Bereich aufgestellt ist. (Stapeln Sie den Router nicht.) · Der Alarm stoppt, wenn die Temperatur unter den Schwellenwert fällt.
Definizione avviso audio QHora-322
Durata
Frequenza
Bip lungo e breve
1 bip lungo e 2 bip brevi 2 bip lunghi e 1 bip breve
Suono lungo
1
1
Suono breve
10 (ogni 1 minuti)
Descrizione
Il router sta ripristinando le configurazioni e si sta riavviando (premere il pulsante di ripristino per 10 secondi).
Il router ha completato l'aggiornamento firmware.
Il router si sta avviando.
Il router sta ripristinando la password dell'account amministratore (premere il pulsante di ripristino per 5 secondi).
La CPU si sta surriscaldando. · Verificare che la ventilazione del router sia sufficiente e che sia stato posizionato in una posizione aperta. (Non sovrapporre il router.) · L'avviso si interrompe quando la temperatura scende al di sotto del livello soglia.
QHora-322
1 2 2 1
10
1
1
5
101
CPU · ·
QHora-322
1 2
2 1
( 10 ).
.
1
.
1
( 5 ).
10(1 )
CPU . · . ( .) · .
Zdefiniuj powiadomienie dwikowe QHora-322
Czas trwania
Dlugie i krótkie sygnaly dwikowe
Dlugi sygnal dwikowy
Czstotliwo
1 dlugi i 2 krótkie sygnaly dwikowe
2 dlugie i 1 krótki sygnal dwikowe
1
1
Krótki sygnal dwikowy
10 (co minut)
Opis
Router resetuje konfiguracje i ponowny rozruch (nacinij przycisk resetowania i przytrzymaj przez 10 s.).
Router ukoczyl aktualizacj oprogramowania ukladowego.
Trwa uruchamianie routera.
Router resetuje haslo do konta administratora (nacinij przycisk resetowania i przytrzymaj przez 5 s.).
Doszlo do przegrzania si procesora. · Sprawd, czy router jest odpowiednio wentylowany i czy zostal umieszczony w otwartej przestrzeni. (Nie ustawiaj serwerów jeden na drugim.) · Powiadomienie dwikowe zostanie wylczone, jeli temperatura spadnie poniej wartoci progowej.
Definición de alerta de audio del QHora-322
Duración
Pitidos largos y cortos Pitido largo
Pitido corto
Frecuencia
Descripción
1 pitido largo y 2 pitidos cortos
El router está restableciendo las configuraciones y reiniciándose (pulse el botón de restablecimiento durante 10 segundos).
2 pitidos largos y 1 pitidos cortos
El router ha completado la actualización del firmware.
1
El router se está iniciando.
El router está restableciendo la contraseña de cuenta de
1
administrador (pulse el botón de restablecimiento durante 5
segundos).
10 (cada 1 minuto)
La CPU se está sobrecalentado. · Compruebe que el router está correctamente ventilado y se ha colocado en un espacio abierto. (No apile el router). · La alerta se detiene cuando la temperatura se encuentra por debajo del límite del umbral.
QHora-322
1 2
( 10 )
2 1
1
1
( 5 )
10 ( 1 )
CPU · () ·
QHora-322
1 2 2 1 1 1
10 1
10 5
CPU · ·
Download Center www.qnap.com/download
Visit Download Center for our full guides and utilities.
en
Unsere vollständigen Handbücher und Dienstprogramme finden Sie im Download Center.
de
Visitez le Centre de téléchargement pour accéder à nos guides et utilitaires complets.
fr
Per le guide e le utilità complete, visitare il Centro download.
it
Visite el Centro de descargas para ver todas nuestras guías y utilidades.
es
Bezoek het downloadcentrum voor onze uitgebreide gidsen en hulpprogramma's.
nl
Besök Nedladdningscenter för våra fullständiga guider och verktyg.
sv
Katso täydelliset oppaat ja apuohjelmat latauskeskuksestamme.
fi
Besøg Downloadcenter for at se alle vores vejledninger og hjælpeværktøjer.
da
Gå til Nedlastingssenter for fullstendige veiledninger og verktøy.
no
Visite a Central de Download para acessar nossos guias e utilitários completos.
pt
, .
ru
tw
""
cn
ja
.
ko
th
Tam kilavuzumuz ve yardimci hizmetlerimiz için ndirme Merkezi'ni ziyaret edin.
tr
A teljes útmutatók és segédprogramok megtekintéséhez keresse fel a Letöltési központot.
hu
Kompletního prvodce a nástroje najdete na webu Centrum stahování.
cs
Odwied Centrum pobierania, aby uzyska kompletne przewodniki i narzdzia.
pl
.
ar
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause
undesired operation. FCC Class B Notice: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/television technician for help. Modifications: Any modifications made to this device that are not approved by QNAP Systems, Inc. may void the authority granted to the user by the FCC to operate this equipment.
This QNAP device complies with CE Compliance Class B.
www.qnap.com/regulatory/
According to the requirement of the WEEE legislation the following user information is provided to customers for all branded QNAP products subject to the WEEE directive.
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
Office in EU; QNAP GmbH, Karl-Arnold-Straße 26, 47877 Willich, Germany
Office in UK; QNAP Ltd, 2 Drakes Meadow, Swindon SN3 3LL United Kingdom
This device complies with the UKCA requirements for products sold in Great Britain.
EU RoHS statement
This equipment complies with the European Union RoHS Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment. The directive applies to the use of lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), and polybrominated diphenyl ethers (PBDE) in electrical and electronic equipment.
THIS PRODUCT CONTAINS A BUTTON BATTERY
If swallowed, a lithium button battery can cause severe or fatal injuries within 2 hours. Keep batteries out of reach of children. If you think batteries may have been swallowed or placed inside any part of the body, seek immediate medical attention
install.qnap.com service.qnap.com download.qnap.com
Printed in Taiwan
51000-025029-HF