Safety Instructions
- Turn OFF the main power at the fuse or circuit breaker before installing the light fixture or making any electrical connection.
- Make sure this light fixture is adequately grounded. Consult local electrical codes for wiring and grounding requirements if any problem occurs.
- Do not use diluent, gasoline, and corrosive liquid to clean, at risk of discoloration or damage.
- Do not attempt to change the light source. Replace it with a new light when the light source expires.
- Do not install the light in a damp location such as a bathroom.
- For indoor use only.
Installation Instructions
Step 1:
Twist counterclockwise to get the base off the ceiling light.
[Image Description: A circular ceiling light fixture base with a red arrow indicating counterclockwise rotation.]
Step 2:
Secure the base to the ceiling with screws.
[Image Description: A hand holding a drill securing the ceiling light base to the ceiling with screws.]
Step 3:
Connect the wires to the connector according to the L, G, N labels. Pull lightly to check if they're well connected.
[Image Description: Hands connecting wires to a connector block labeled L, G, N.]
Step 4:
Push the ceiling light to the base and twist it clockwise until it can't be twisted anymore. Pull lightly at the light to make sure it's reliably fixed.
[Image Description: A person pushing and twisting a circular ceiling light fixture onto its base.]
