Instructions for INNOTRACE models including: INNOTRACE, X1, Tool
INNOTRACE GmbH. 1. Manual. X1 Tool. Page 2. INNOTRACE GmbH. 2. 1. Homescreen. Page 3. 2. Registation. Page 3. 3. Login. Page 4. 4. Firmware Update.
INNOTRACE GmbH 3 1. Homescreen After the first start, the software must be registered on the engine / end user. 2. Registration Organisation: The company name must be typed in here as a company or reseller.
File Info : application/pdf, 6 Pages, 309.61KB
DocumentDocumentINNOTRACE GmbH Manual X1 Tool 1 INNOTRACE GmbH 1. Homescreen 2. Registation 3. Login 4. Firmware Update 5. The lower status bar 6. Assistance levels menu 7. Save & load settings Page 3 Page 3 Page 4 Page 4 Page 4 Page 5 Page 6 2 INNOTRACE GmbH 1. Homescreen After the first start, the software must be registered on the engine / end user. 2. Registration Organisation: The company name must be typed in here as a company or reseller. Gender: Choose gender Firstname: Firstname Surname: Surname Email: E Mail Adress Mobile: Mobile phone number Password: at least 8 characters At least 1 uppercase letter, lowercase letter, number and special characters No 2 identical characters in a row. Finally click on register. 3 INNOTRACE GmbH 3. Login To log in, enter the previously assigned email address and password and then click on Login. In order not to have to re-enter the login data, the mark for "Save Password" can be set. 4. Firmware Update After the motor has been successfully connected, if new firmware is available, a message is displayed as to whether it should be imported. 5. The lower status bar The lower status bar reports the connection status. Red: X1 programming adapter is not plugged in. Yellow: X1 programming adapter recognized and operational. Green: Motor connected and ready to use. 4 INNOTRACE GmbH 6. Assistance levels menu Read: Reading of the currently existing engine settings Write: Write the motor settings currently displayed on the screen Assist Level: 1 5 Bafang Eco 6 10 Bafang Sport Torque: Maximum available continuous power for pedaling Throttle: Maximum available continuous power for the throttle Sensitivity Torque: Sensitivity of the torque sensor. The higher the value, the less force I need when pedaling to get the set maximum power. Speed Throttle: Maximum speed with the throttle Speed Torque: Maximum speed when pedaling Motor Torque: Torque when starting Achtung: After the desired values have been set, use the button the settings are written to the motor. 5 INNOTRACE GmbH 7. Save & load settings Load: Attention: Load engine settings saved on the computer. The loaded settings must then be written to the motor with the Write button. Save: Save the engine settings on the computer 6Microsoft Word 2019