Sensi Lite Smart Thermostat Installation Guide

Downloading the App and Creating an Account

You Will Need

• Wi-Fi Network Name/SSID (must be a 2.4GHz network)
• Wi-Fi Network Password
• Screwdriver
• Hardware included in the Sensi Lite smart thermostat packaging

Download the Sensi App

The Sensi Lite smart thermostat is a Wi-Fi enabled device. To install and configure your thermostat correctly, you must use the Sensi app. Download the Sensi app to your smartphone or tablet; it is a free download. You can find the app by searching your device's app store or by scanning the provided QR code.

Create an Account

When you download the Sensi app, you will be prompted to create an account. This is required to access your thermostat remotely and use all the features Sensi offers. Use a valid email address and a password of your choosing. Remember this email address and password, as your Sensi thermostat will be linked to it once registered.

Installing the Sensi Thermostat

Step 1: Add Your Thermostat to the Sensi App

Once you have downloaded the Sensi app and created an account, you are ready to install the thermostat to your wall and connect it to Wi-Fi. If there are no registered thermostats, tap the [plus sign] ➕ to add a thermostat. First, choose which thermostat you purchased. The Sensi Lite smart thermostat option is for the following model numbers: ST25 series, 1F76U-22WFB series. You can check your model number on the back of the thermostat cover.

Step 2: Is Your Sensi Thermostat Already on Your Wall?

New Installation

After choosing your Sensi model, tap "New Installation". Next, select whether your thermostat is "Currently Mounted" or "Not Mounted" on the wall.

Not Mounted

This option guides you through a full step-by-step installation process. You will identify the wires on your original thermostat, learn how to label them for Sensi, how to connect your wires, and how to connect to Wi-Fi. Choose this option if you did not have this thermostat professionally installed, as it ensures your thermostat is properly wired and configured for your HVAC system.

Is Currently Mounted

This option asks you to identify the wires already installed on your Sensi Lite to ensure your HVAC settings are correct and to connect to Wi-Fi. If a professional technician installed your thermostat, choose this option and skip to STEP 5.

Pro Tip: If you are DIYing your installation, always choose "Not Mounted" to make sure your thermostat is wired and configured correctly.

Step 3: Remove the Old Thermostat from Your Wall

Gather Tools and Package Contents

Gather all the necessary tools for installation.

Turn Off Power

Turn off the power to your heating and air conditioning system before handling your thermostat wires.

Remove Old Thermostat Cover

Remove the cover using a screwdriver or by pushing the pressure latch. Some covers pull off easily, while others may need to be released using a screwdriver.

Photograph Your Wiring

THIS IS IMPORTANT. The Sensi app will prompt you to take a picture of your existing thermostat and old wiring in case you need it later. This can be helpful for troubleshooting with the technical support team. The picture you take will be saved to your camera roll or photo gallery.

Throw Away Any Jumper Wires

Sensi has a jumper wire built into it, so you will not need any jumper wires from your old unit.

Choose Wire Terminals

Choose the terminal labels that have wires attached to them on your old thermostat. The app will tell you if you have a valid configuration. If you receive an invalid configuration message, you can learn more about compatibility at sensi.emerson.com/system.

Step 4: Secure Your New Thermostat Base to the Wall and Connect Wires

Install Sensi Base

Use the mounting screws provided and secure the Sensi base to the wall.

Connect the Wires

Once the Sensi base is mounted and secured on the wall, insert the wires into the corresponding terminals, then tighten the screw.

Step 5: Scan QR Code and Attach Thermostat Cover

Scan QR Code

On the back of the thermostat or in the Welcome/Get Started insert found in the box, you will find the QR Code to connect the thermostat to your Wi-Fi network. Scan this code. You will need to allow Sensi access to Bluetooth to connect properly. If you're having trouble scanning, tap "Use PIN" to manually enter the code located under the QR code.

Install Batteries and Attach Thermostat Cover

Install the two provided AAA batteries and push the thermostat cover onto the base.

Turn On Power

Turn the power to your heating and air conditioning system back on.

Step 6: Connecting to Wi-Fi and Registering Your Thermostat

Pro Tip: If the thermostat screen is not turning on after wiring installation, the batteries may not be installed properly. See the troubleshooting section on page 7 for more information.

Wi-Fi Setup

On the thermostat, press and hold the Mode Button for four seconds. You will see the setup and [Wi-Fi icon] ? appear.

Select Your Wi-Fi Network

In the mobile app, select your home Wi-Fi network and then enter your home Wi-Fi network password.

Pro Tip: Sensi is only compatible with 2.4GHz networks. If your network does not show up in the list, it is either hidden or not compatible with Sensi.

Name Thermostat

You can select a name or choose a custom name for your thermostat. Press "Next" to continue.

Register Thermostat

After successfully connecting Sensi, the app will prompt you to register the thermostat. You can either choose the "Locate Me" option or fill in your street address, city, state, ZIP code, country, and time zone manually. Press "Next" to continue.

Contractor Information (Optional)

If a contractor professionally installed your thermostat and is registered as a Sensi partner, they have the option to input their phone number here. If there is not a registered number available, simply hit "Next" to continue.

Start Using Sensi

Congratulations on successfully installing Sensi. Press "Start Using Sensi" to open the main screen of the app.

Troubleshooting

Why Isn't My Heating/Cooling Turning On?

• Ensure that there is power to your HVAC system and there is no error code on your control board indicating a system issue. If there is an error code or no power, contact an HVAC professional to service your equipment.
• Reset breakers.
• Make sure the furnace/air handler door compartments are securely screwed down and closed. If the door panels are not secure, the system will not start.
• Secure wire connections.
• Ensure the thermostat is wired correctly by following the instructions in the Sensi app.
• You can also try to reinstall your original thermostat to make sure there is not an HVAC system issue preventing the system from turning on. If your heating/cooling doesn't come on with the original thermostat, you may need to contact a professional technician to service your equipment.

Connecting to Wi-Fi Troubleshooting

If you're having trouble connecting to Wi-Fi, here are some tips to try:

• Make sure the Sensi app is up-to-date and running the latest version available in your app store.
• Reboot your smartphone.
• Reboot your router by unplugging it from the wall for a few minutes and then plugging it back in.
• Make sure Bluetooth [Bluetooth icon] ⚙️ is turned on in your phone settings and is allowed in the Sensi app permissions.
• Make sure Location access is turned on in your phone settings and is allowed in the Sensi app permissions.
• Try another smartphone or tablet. Simply download the Sensi app and sign into the app using the email address and password you used when you created your account.

Reconnecting to Wi-Fi

If you replaced your router or changed your Wi-Fi network password, you will need to reconnect your thermostat to Wi-Fi. This process is different depending on what smart device you are using. Please see our support article for more information on how to reconnect: sensi.emerson.com/en-us/support/reconnecting-sensi-thermostat-to-wifi.

Notes

HVAC Configuration Menu

If you want to check that your thermostat's HVAC settings were configured correctly or you're experiencing a system issue, refer to the chart for equipment descriptions and options. Learn more about how to properly configure your thermostat here: sensi.emerson.com/en-us/support/how-do-i-configure-my-thermostat.

Configuration Menu Items Reference

Accessing Your Sensi Thermostat from Other Devices

When you log into your Sensi account with your email address and password, the app will be able to control all the thermostats registered to your Sensi account. If you give someone else your email address and password, they will be able to log in and control any thermostats registered to that account. You can change your email address and password from inside the app. Be aware of this when giving out your information. There is no limit to the number of devices that can access the thermostat.

Forgot Password

If you forget the password to your Sensi account, click on "Forgot Password" on the login screen of the Sensi app. A temporary password will be sent to the email address that you use to log in.

Installing Multiple Thermostats

If you are installing more than one thermostat, follow the same installation process in the Sensi app. Once you have one thermostat installed, open the Sensi app on your phone. At the main screen, press the [plus sign] ➕ to add another thermostat to your account.

Accessing Account Information

You can use the "Account" area to access your email preferences and change your account information and the email address associated with your Sensi. For iOS: Tap the person icon in the upper right corner. For Android: Tap the three dots in the upper right corner.

Technical Support

For problems installing your Sensi thermostat, visit our support site. We have a vast collection of troubleshooting articles aimed at helping you install Sensi and using its features. We also have a support team available to help assist you.

Website: sensihelp.com

Phone: (888) 605.7131

Wiring Diagrams

Conventional Single-Stage or Multi-Stage Systems (No Heat Pump)

This diagram illustrates the wiring connections for conventional HVAC systems without a heat pump. It shows the thermostat terminals (R, O/B, Y, G, W/E, C) and their corresponding connections to the HVAC system components like the 24VAC power, indoor blower, heating, and cooling stages. Notes clarify system capabilities and common connection requirements.

• Thermostat Terminals: R, O/B, Y, G, W/E, C
• System Configuration Descriptions: Details for single-stage and multi-stage AC/Gas/Electric systems.
• Notes: System only capable of multi-stage heating or multi-stage cooling, not both. Common connection required on heat-only, cool-only or heat pump systems.
• Power Indicators: Shows 24 VAC HOT/NEUTRAL and 120 VAC HOT/NEUTRAL relationships.

Heat Pump Systems

This diagram illustrates the wiring connections for heat pump HVAC systems. It shows the thermostat terminals (R, O/B, Y, G, W/E, C) and their corresponding connections to the HVAC system components, including the heat pump compressor, reversing valve, auxiliary/emergency heat, indoor blower, and 24VAC power. Notes clarify system capabilities and common connection requirements.

• Thermostat Terminals: R, O/B, Y, G, W/E, C
• System Configuration Descriptions: Details for heat pump systems, including reversing valve setup (O or B) and auxiliary heat.
• Notes: Common connection required on heat-only, cool-only or heat pump systems. Multi-stage not available for heat pump configurations.
• Power Indicators: Shows 24 VAC HOT/NEUTRAL and 120 VAC HOT/NEUTRAL relationships.