MiBoxer POW-LH1 High Voltage RGB Strip Light Driver

Features

This product utilizes a 2.4G wireless remote controller, smartphone APP control, and 4G control via a 2.4GHz gateway. It employs a PWM pulse dimming method with no flickering and features a built-in power supply with soft-start function to prevent LED chip damage from voltage overshoot. It also includes protection for output over current, overload, over voltage, and short circuits.

• RGB Color changing
• Mix Red, Green, and Blue light to adjust color temperature
• Dimmable
• Saturation control
• 2.4G RF wireless transmission technology
• Remote control: Control distance up to 30m
• Smart phone APP control: Requires WiFi Box or 2.4GHz Gateway
• Support Amazon Alexa and Google Assistant control: Requires 2.4GHz Gateway

Parameters

• Model No.: POW-LH1
• Input Voltage: AC200~240V 50/60Hz
• Input Current: Max 3.5A
• Output Voltage: DC215V
• Output Current: 1.85A
• Rated Power: Max 400W
• Transmitting Power: 6dBm
• Efficiency: 94%
• PF: ≥0.5
• Output Connecting Method: RGB common anode (4 channel, 3 circuit)
• Working Temp.: -10 ~ 40°C
• Working Humidity: 20 ~ 95%RH, non-condensing
• Storage Temp., Humidity: -30 ~ 85°C, 5~95%RH
• Control Distance: 30m

Connection Diagram

Input: AC200~240V

Output: DC215V G- V+ R- B-

LED strip connecting rank:

Diagram showing input and output terminals for the driver.

Dynamic Mode Sheet

Switch-OFF to change color instruction

To change colors and dynamic modes:

1. Switch OFF for 3 seconds, then Switch ON again.

Cycle through colors and modes:

1. Static Red
2. Static Green
3. Static Blue
4. Static Yellow
5. Static Cyan
6. Static Purple
7. Static Cool White
8. Static Warm White
9. Mardi Gras
10. Automatic color change
11. Sam
12. Gemstone
13. Twilight
14. American
15. Fat Tuesday
16. Party
17. Slow Color Splash

To reset to factory settings:

1. Switch OFF for over 3 seconds, then Switch ON again.

Diagram illustrating the switch-off/on sequence for changing colors and modes.

Auto-transmitting Diagram

One strip light driver can transmit signals from the remote control to another strip light driver within a 30m range. As long as there is a strip light driver within 30m, the remote control distance can be limitless.

Diagram showing multiple strip light drivers relaying signals over distance.

Auto-synchronization function

Different strip light drivers can operate synchronously when started at different times, controlled by the same remote, under the same dynamic mode, and with the same speed, provided they are within 30m distance.

Diagram illustrating synchronous operation of multiple strip light drivers.

Link/Unlink

Compatible with the following Mi-Light remote controls (purchased separately): FUT089, FUT092, FUT088, FUT095, FUT096, B8, B4/T4, B3/T3, B0.

Diagrams showing the linking and unlinking process with various remote controls.

Note: Lighting can be operated after linking with a remote. For more details, please refer to the remote control's instruction manual.

Attention

1. Please verify that the input voltage supply matches the strip light driver's requirements.
2. Non-professional users should not attempt to dismantle the strip light driver, as this may result in electric shock.
3. The working temperature range is -10~40°C. Avoid using the device in direct sunlight, humid environments, or other high-temperature areas.
4. Avoid using the strip light driver in areas with metal obstructions or strong magnetic fields, as this can negatively impact the control distance.

www.futlight.com

Made in China

Certifications: CE, RoHS