Infinix Note 12 2023 (X676C) User Manual

Know Your Phone

To turn on the device, press and hold the power button until the display lights up.

To turn off the device, press and hold the power button, then long press "POWER OFF".

To restart the device, press and hold the power button until the device vibrates.

Key Components:

• 1. Front camera
• 2. Volume + key
• 3. Volume - key
• 4. Power key & side fingerprint sensor
• 5. NFC

SIM/SD Card Installation

1. Power off the mobile phone.
2. To open the SIM tray, insert the provided SIM-eject tool into the hole beside the tray.
3. Insert the SIM card into the SIM card slot.
4. Insert the SIM card slot and ensure it is in place.
5. Refer to the illustration for SIM/SD card installation.

Safety Information

Please read all safety information carefully before using your device to ensure safe and accurate operation and proper disposal.

Operation, Safety, Usage Errors and Maintenance Repair Rules:

• Use earbuds with care; excessive sound pressure can cause hearing loss.
• Using an unrecognized or incompatible power adapter, charger, or battery may damage the device, shorten its lifespan, or cause fire, explosion, or other hazards.
• Keep the device and battery away from excessive heat and direct sunlight. Do not place them on or in heating devices.
• The back cover cannot be removed.
• Do not replace, disassemble, modify, crush, or cut the battery, as it may cause leakage, overheating, explosion, or fire.
• Observe local laws and regulations. Do not use the wireless device while driving to reduce accident risk.
• Only use the device according to the provided instructions, especially before flying or boarding an aircraft. Using wireless devices in an aircraft may cause interference or be illegal.
• Avoid using the device in dusty, smoky, damp, dirty, or magnetically affected environments to prevent damage to internal circuits.
• Ensure the power adapter is plugged into a nearby and accessible outlet when charging.
• Unplug the charger when not in use.
• Do not use, store, or transport the device in locations with flammable materials or explosives.
• Dispose of the device, battery, and accessories according to local regulations. Do not mix with normal household waste.
• Clean the device with a dry, soft cloth.

Disposal and Recycling Information

The crossed-out wheeled bin symbol indicates that the product, battery, or packaging must be taken to separate waste collection points at the end of its life and not disposed of with normal household waste. Users are responsible for disposing of equipment and batteries at designated collection points using separate recycling services according to local laws. Proper collection and recycling help conserve valuable materials, protect human health, and the environment. For more information, contact local authorities, dealers, or household waste disposal services.

Reduction of Harmful Substances

This device and its electrical accessories comply with local laws restricting harmful substances in electrical and electronic equipment, including EU REACH, RoHS, and battery regulations.

Specific Absorption Rate (SAR) Certification

This device meets international guidelines for exposure to radio waves.

Use of this device may be restricted depending on the local network. Restrictions in the 5GHz band apply.

Declaration of Conformity

Manufacturer: INFINIX MOBILITY LIMITED

Address: FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT

This product, Model No. X676C, Trademark: Infinix, conforms with relevant standards and other standardising documents, including:

• Health: EN 50360:2017, EN 50566:2017, EN 62479:2010
• Safety: EN62368-1:2014+A11:2017, EN IEC 62368-1:2020+A11:2020
• EMC: ETSI EN 301 489-1 V2.2.3, ETSI EN 301 489-3 V2.1.1, ETSI EN 301 489-17 V3.2.4, ETSI EN 301 489-19 V2.1.1, ETSI EN 301 489-52 V1.2.1, EN 55032:2015+A11:2020, EN 55035:2017+A11:2020, EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019
• Radio: ETSI EN 301 511 V12.5.1, ETSI EN 301 908-1 V15.1.1, ETSI EN 301 908-2 V13.1.1, ETSI EN 301 908-13 V13.2.1, ETSI EN 300 328 V2.2.2, ETSI EN 303 345-1 V1.1.1, ETSI EN 303 345-3 V1.1.1, ETSI EN 303 413 V1.2.1, ETSI EN 301 893 V2.1.1, ETSI EN 300 440 V2.2.1, ETSI EN 300 330 V2.1.1

This declaration is issued under the sole responsibility of the manufacturer. The object of the declaration is in conformity with Union harmonization legislation, including Directive 2014/53/EU (RED), RoHS Directive, Organotin compounds, REACH, and SVHC regulations.

Place and date of issue: Shenzhen/2022-6-8

Issued by: Yiting Luo, Manager

Accessories and Components

The following accessories and components, including software, allow the object of the declaration to operate as intended:

• Software Version: X676C-H891AaAb
• Hardware Version: V1.2
• Adapter 1: U330XEA (Input: 100-240V~ 50/60Hz 1.5A, Output: 5.0V 3.0A 15.0W or 10.0V 3.3A 33.0W MAX)
• Adapter 2: U330XKA (Input: 100-240V ~50/60Hz 1.5A, Output: 5.0V 2.0A 10.0W or 10.0V 3.3A 33.0W MAX)
• Rechargeable Li-ion Polymer Battery: BL-49KX (Rated Voltage: 3.87V, Rated Capacity: 4900mAh/18.96Wh, Typical Capacity: 5000mAh/19.35Wh, Limited Charge Voltage: 4.45V)

Notified body involved: TÜV Rheinland LGA Products GmbH, 0197.

Conformity assessment performed according to: Directive Annex III Module B of the 2014/53/EU Radio Equipment Directive (RED).

DTS Information

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the DTS logo, and DTS and the DTS logo together are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.

Operating System

Operating System: Android™. Android is a trademark of Google LLC.