Diagram Overview
The diagram illustrates the connection points for a liquid cooling system on a graphics card. It shows a GPU water block with ports labeled "Tubing" and "Fitting". Below this, there are two G1/4 threaded fittings, one shown connected to the water block and another separate fitting. Arrows indicate the flow and connection points. The text "RADEON" is visible on the graphics card. A note states: "The image is for reference only; actual display is based on the real product."
Quick Installation Guide (English)
Before You Start
- Please carefully read the full manual before beginning the installation process.
- The use of corrosion-inhibiting coolants is always recommended for any liquid cooling system.
- Do not use pure distilled water.
- Make sure to thoroughly bleed air out of your water block to achieve optimal performance.
Installation Steps
- Screw in the two G1/4 threaded male fittings.
- Attach the liquid cooling tubes and connect the water-block(s) into the cooling circuit. To ensure that the tubes are securely attached to the barb/fittings, please use hose clamps or an appropriate substitute.
- Do not forget to plug the remaining two openings with the enclosed G1/4 or equivalent plugs.
- You can use any opening as an inlet/outlet port.
