JBL CINEMA SB250
Home Cinema 2.1 soundbar with wireless subwoofer
Introduction
Thank you for choosing this JBL product. The JBL CINEMA SB250 powered soundbar speaker system is a complete, integrated sound system that will create an extraordinarily realistic cinema experience in your own living room. The powered soundbar unit can mount on a wall or sit on a shelf and comes complete with all of the cables required to connect it to your TV, your cable/satellite tuner and disc player. The wireless subwoofer unit supplies all of your entertainment's drama and impact, and can be placed anywhere without needing to be connected to the soundbar unit.
We're confident that this JBL system will provide every note of enjoyment that you expect – and when the time comes to purchase additional audio equipment for your home, car or office, you'll choose JBL products.
This quick-start guide contains all the information you need to set up, connect and adjust your new speaker system. For more in-depth information, please go to our website: www.jbl.com.
Items Included
- Soundbar: A long, slender audio device designed to sit below a TV.
- Wireless subwoofer: A large, cube-shaped speaker for low-frequency sounds.
- Remote control: A handheld device for operating the soundbar.
- Optical cable: A cable for digital audio connection.
- Analog aux cable: A cable for analog audio connection (3.5mm to RCA).
- Soundbar power cable: Cable to power the soundbar.
- Subwoofer power cable: Cable to power the subwoofer.
- Wall mount accessories: Hardware for mounting the soundbar to a wall.
Controls and Connections
JBL CINEMA SB250 Top Panel Controls
- 1. Power on/Standby: Toggles the system between ON and Standby mode.
- 2. Source selection: Cycles through input sources (AUX, OPTICAL).
- 3. Volume +/-: Adjusts the system volume. Pressing both simultaneously mutes the system.
- 4. Surround mode: Toggles Harman Display Surround processing ON/OFF.
- 5. Bluetooth source / Pairing: Sets the system to Bluetooth mode or initiates pairing.
JBL CINEMA SB250 Soundbar Rear Panel Controls and Connections
- Power switch: Main ON/OFF switch for the soundbar.
- Power input AC: Connection for the AC power cable.
- Subwoofer wireless pairing button and LED indicator: Initiates wireless pairing with the subwoofer.
- Wall / Table EQ: Switch to optimize bass for wall or table placement.
- Analog Audio in: 3.5mm stereo analog audio input.
- Optical Audio in: Digital optical audio input.
- USB port: For software updates only.
JBL CINEMA SB250 Subwoofer Controls and Connections
- Power indicator: Shows the subwoofer's power status (amber for standby, white for ON).
- Phase switch (0°/180°): Adjusts subwoofer driver phase for optimal bass integration.
- Wireless pairing button and LED indicator: Initiates wireless pairing with the soundbar. LED status indicates pairing progress and connection.
- Power input AC: Connection for the AC power cable.
Remote Control Functions
- 1. Power on/Standby: Turns the system ON or puts it into Standby mode.
- 2. Bluetooth: Selects Bluetooth source or initiates pairing.
- 3. Aux-In (Analog): Selects the analog audio input.
- 4. Optical (Digital): Selects the digital optical input.
- 5. Audio Feedback: Toggles audible tones for function changes.
- 6. Mute: Mutes or unmutes the audio output.
- 7. Volume +/-: Adjusts the main system volume.
- 8. Subwoofer Volume +/-: Adjusts the subwoofer bass level.
- 9. Harman Display Surround: Toggles surround sound processing ON/OFF.
- 10. Stereo: Switches to stereo mode.
- 11. Harman Volume: Activates Harman Volume for consistent sound levels.
Operation
Turning the JBL CINEMA SB250 ON and OFF
The system can be turned ON or put into Standby mode manually using the Power button on the soundbar or remote. The system automatically enters Standby mode after 10 minutes of inactivity. Auto-turn-on activates the system when an audio signal is detected from a paired Bluetooth source or the last used analog/optical input.
Turning the Subwoofer ON and OFF
The subwoofer turns on with the soundbar and remains active for a short period after the soundbar enters Standby mode or loses audio signal.
Pairing the Subwoofer to the Soundbar
To establish a wireless connection, press the pairing button on both the soundbar and subwoofer within 30 seconds of each other. The maximum wireless operating distance is approximately 50 feet (15.3m).
Operating through Bluetooth®
To stream audio wirelessly, ensure the JBL CINEMA SB250 is in Bluetooth pairing mode (Bluetooth LED flashing blue). Place your Bluetooth device in pairing mode and select "CINEMA SB250" from its list of available devices. Once paired, the Bluetooth LED will be solid blue. You can also wake the system from Standby by starting to stream audio from a paired device.
Adjusting the System Volume
It is recommended to turn off your TV's built-in speakers. Use the soundbar's Volume Up/Down buttons to set a comfortable listening level. Note: If the system is played at over 50% volume, it will automatically reset to 50% when turned off and back on.
Surround Mode Button
Press the Surround Mode button to switch between Harman Display Surround (amber indicator) for an immersive experience and Stereo mode (white indicator) for standard audio.
Programming JBL CINEMA SB250 to Respond to Your TV Remote
The soundbar can be programmed to respond to your TV remote's commands for power, mute, and volume. Follow the on-screen instructions carefully, ensuring the TV remote is aimed at the soundbar. To reset settings, press and hold the Surround and Volume (-) buttons simultaneously while the system is in Standby mode.
Placement
Placing the Soundbar
On a table: Place the soundbar directly in front of the TV screen, centered. Ensure the surface is flat. Set the soundbar's EQ switch to the "Table" position.
Wall-mounting: Use the included wall-mount bracket. Determine the location, mark holes (evenly spaced 7-1/16" or 18cm apart), and attach the bracket securely to the wall using appropriate hardware for your wall type. Connect cables, set the EQ switch to "Wall" and the power switch to "On". Slide the soundbar onto the bracket's tabs. Adjust the angle for leveling.
Subwoofer Placement
Subwoofer performance is influenced by room acoustics. Experiment with placement: corners (position 1) can maximize bass but may cause standing waves; placing it along the same plane as the soundbar (position 2) can improve integration; placement behind the listening position (position 3) is also an option. Test different locations with bass-heavy content to find the best spot for bass performance.
Important: Ensure the subwoofer's rear panel is at least 150 mm (6 inches) away from the wall for proper operation.
Troubleshooting
| Problem | Solution |
|---|---|
| Soundbar does not turn ON | Check AC power cord connection to outlet and soundbar. |
| Subwoofer does not turn ON | Check subwoofer power cord connection. Press the subwoofer's Power switch. Check subwoofer AC fuse. |
| No sound from soundbar and subwoofer | Ensure soundbar is ON (white power indicator). Check cable connections to TV/source. Verify correct source is selected and playing. Ensure system is not muted. Check if soundbar volume is too low. |
| No sound from subwoofer only | Check if Subwoofer Volume Control is turned down. Check wireless connection (solid blue LED). If flashing blue, restart pairing. |
| Distorted sound | Move subwoofer closer to soundbar (max 50 ft/15.3m). Check source component for distortion. If using variable output, check source settings. |
| Sound present even at max volume | Turn up subwoofer volume. Move subwoofer to a corner or closer to seating. |
| Bass output not loud enough | Turn up the subwoofer's volume. Move the subwoofer to a corner or closer to the seating location. |
| Volume resets on power cycle | This is a feature: volume resets to 50% if played above 50% and powered off. |
| TV ON/Standby behavior | This may be related to TV's Hot Plug Detection (HPD) protocol. Toggle HPD by pressing Surround and Volume buttons simultaneously. |
Specifications
- Frequency response: 45Hz - 20kHz
- Maximum SPL: 100dB
- Speaker configuration: Two-way, dual driver left and right speaker modules, each with two 55mm (2.25") full range drivers and a 32mm (1.25") dome tweeter.
- Subwoofer: Wireless, powered, with a 165mm (6.5") driver in a ported enclosure.
- Total amplifier power: 320W max.
- Decoding: Dolby® Digital Decoding.
- Connectivity: Bluetooth® connectivity.
- Inputs: One stereo analog-audio input, One optical digital input.
- Other: One USB port for software update.
- Dimensions (Soundbar): 39.4" x 2.4" x 3.1" (1000 x 62 x 78mm).
- Weight (Soundbar): 7.3lb (3.3kg).
- Dimensions (Subwoofer): 9.5" x 9.5" x 12.6" (242 x 242 x 320mm).
- Weight (Subwoofer): 10.6lb (4.8kg).
Manufacturer Information: HARMAN International Industries, Incorporated, 8500 Balboa Boulevard, Northridge, CA 91329 USA. www.jbl.com
Copyright: © 2016 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of HARMAN International Industries, Incorporated. Bluetooth® is a registered trademark of Bluetooth SIG, Inc. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Russian Specifications: Торговая марка: JBL. Назначение товара: АКТИВНАЯ АКУСТИЧЕСКАЯ СИСТЕМА. Изготовитель: ХАРМАН ИНТЕРНЕШНЛ ИНДАСТРИЗ ИНКОРПОРЕЙТЕД, США. Страна происхождения: Китай. Импортер в Россию: ООО "ХАРМАН РУС СИАЙЭс", РОССИЯ. Гарантийный период: 1 год. Информация о сервисных центрах: www.harman.com/ru тел. +7-800-700-0467. Срок службы: 5 лет. Срок хранения: не ограничен. Условия хранения: Стандартные. Номер документа соответствия: EAC. Дата производства: Определяется по серийному номеру.
