Fire Floor
Manual DE / EN
Installation and Commissioning
A diagram illustrates the process of attaching the glass shade to the lamp. It shows the glass being screwed onto a threaded part of the lamp stem.
German Instructions
Carefully remove the glass from the packaging. Screw it onto the thread counterclockwise until it sits evenly. Then turn it clockwise until hand-tight, ensuring it is secure and aligned.
Warning
Do not switch on the light without the glass; this can cause eye damage!
English Instructions
Carefully remove the glass from the packaging. Place it counterclockwise onto the thread until it sits evenly. Then turn it clockwise until hand-tight, ensuring it is secure and aligned.
Warning
Do not switch on the light without glass risk of eye damage!
Dimensions and Scope of Delivery
A line drawing of the floor lamp shows its dimensions: Head diameter: 16.3 cm. Height: 126 cm. Base diameter: 25 cm, thickness: 3.3 cm.
Scope of Delivery
| Item | Quantity |
|---|---|
| Lamp Body | 1 |
| Glass Shade | 1 |
Button + Smart LED
A line drawing of the floor lamp indicates the location of the 'Smart LED' and the 'Button/Switch' on the lamp stem.
Plug & Play
A short press of the button activates the Light Player. Your Light Player starts in the Golden Vibe. Pressing the button again activates the Fire Vibe. Holding the button down stops the set vibe and allows you to adjust the brightness. A double-click activates the Sunset Sleep Mode: if the Fire Floor is dimmed (no vibe active), it will gradually dim over 30 minutes and then switch off. If a vibe (Golden or Fire Vibe) is active, it will switch off directly after 30 minutes without dimming.
Smart LED Status
The Smart LED indicates the status of the light. When plugging in the power supply: the Smart LED briefly lights up green. When switching on, changing vibes, switching off, or dimming: the Smart LED does not light up. When the Sunset Sleep Timer is active: the Smart LED lights up permanently violet.
Safety Instructions
- The luminaire must not be opened.
- The luminaire must not be used without the glass, as this can cause eye damage.
- This luminaire must be disposed of properly according to EU regulations.
Technical Specifications
- ? Input: 220V – 240V, 50-60Hz, max. 10W
- ? 420lm, 2600k - 1200k, CRI > 91
- ?️ Protection class II
- ⚖️ 2.5 kg
- ? Suitable for use in dry indoor areas
- ⏳ Proper disposal required after use; do not dispose of in household waste
- CE CE conformity mark
- ⚡ Energy efficiency class F, only replaceable by the manufacturer.
General Information
- This lamp is designed for indoor use.
- Deviations in brightness and white tone of the LEDs are possible due to the manufacturing process and are no reason for complaint.
- The LEDs in this luminaire can only be replaced by the manufacturer.
- The glass is manufactured with high precision by hand. Therefore, irregularities and inclusions may occur in the glass and are part of the material properties.
Care Instructions
Please clean this luminaire with a dry cloth, preferably a microfiber cloth for sensitive surfaces. Clean the fixture only after it has cooled off.
Complaint Notice
Please check the luminaire for optical flaws or scratches before use. Once the product has been put into operation, the right to claim for aesthetic defects expires.
Warranty
You have purchased a high-quality product manufactured and packaged with the utmost care. Should you still have reason for complaint, please contact your dealer. Your claim will be processed as quickly as possible. In case of a return, please ensure protective packaging to avoid transport damage.
Features
- ? Vibes
- ☀️ Sunset Dimming
- ⏰ Sunset Sleep Timer (30 Min)
- [glass icon] Mouth-blown glass
- ?? Produced in Germany / Assembled in Germany
Spare Parts
In case of glass breakage, a replacement glass can be purchased from the GRAU online shop or through our support. When replacing the glass, ensure all shards are removed cleanly and the LED board is undamaged. Correct glass installation is described on page 3.
