Tera 1300C 1D Wireless Barcode Scanner

About This Manual

An asterisk (*) next to an option indicates the default setting.

Scanners are factory programmed for the most common terminal and communication settings.

If settings need to be changed, you can reprogram by scanning the barcodes in this manual.

Note: For the correct use of the product, please read this manual carefully and do not scan configuration barcodes at random. Otherwise, some settings will be temporarily unavailable.

The scanner's keyboard layout default is a US keyboard.

Contact and Support

Please do not hesitate to contact Tera Digital if you have any questions.

Important Notice: Please include your Order Number and Product Model Number in the email.

Official Customer Service

• Email Address: info@tera-digital.com
• Cell: +1 (909)242-8669
• Whatsapp: +1 (626)438-1404

Follow us:

• Instagram: tera_digital
• Youtube: Tera Digital
• Twitter: Tera Digital
• Facebook: Tera

User manuals are available in Spanish, French, Italian and German, and can be downloaded from our website. You may visit our official website via the link below:

https://www.tera-digital.com

Contents

• Factory Default Settings
• Operation Modes
• USB-COM/Virtual Serial Port
• 2.4GHz Wireless Pairing
• Bluetooth HID Pairing
• Bluetooth SPP/BLE Pairing
• Bluetooth HID Speed
• Scan Modes
• Beeper Volume
• Vibration
• Sleep Timer
• Terminators
• Keyboard Language Settings
• Keyboard Conversion
• Symbologies
• Customize Prefix/Suffix
• Timestamp
• Appendix ASCII

Factory Default Settings

If you are not sure what programming options are in your scanner, or you have changed some options and want to restore the scanner to factory default settings, scan the code below.

[Restore Defaults barcode]

To check battery level or firmware version, scan the appropriate code below.

[Show Battery Level barcode] [Show Firmware Version barcode]

Operation Modes

Real Time Mode

In this mode, the scanner transmits scanned data immediately after each scan.

[Real Time Mode* barcode]

Storage Mode:

When the scanner is powered off or turned off, the data stored in the scanner will not be lost unless all data is cleared.

[Storage mode barcode] [Upload all data barcode]

[Upload the total number of data barcode] [Clear all data barcode]

USB-COM/Virtual Serial Port

Scan the following code to program the scanner to emulate a regular RS232-based COM Port. No extra configuration is necessary.

To exit USB-COM mode, please scan the 2.4G Mode barcode.

[USB-COM barcode]

Wireless Pairing Settings

1. Wireless 2.4G pairing steps (receiver pairing)

1. Scan "wireless 2.4G mode".
2. Scan "pairing" to enter pairing mode, the light flashing quickly.
3. Plug in Dongle (USB receiver), hearing a beep sound indicates pairing succeeds. The light stops flashing.

[Wireless 2.4G mode barcode] [pairing barcode]

2. Bluetooth HID Pairing Steps

1. Scan "Bluetooth HID mode" setting code.
2. Scan "pairing" setting code to enter pairing state, the light flashing quickly.
3. Turn on Bluetooth and find "BarCode Bluetooth HID" in the device.
4. Click "BarCode Bluetooth HID", then the Bluetooth device will enter pairing state.
5. Hearing a beep sound indicates pairing succeeds. The light stops flashing.

Note: When the scanner is in the pairing state, double-click the button or the pairing time extends 1 minute will exit the pairing state.

When using the Bluetooth Scanner, the Bluetooth connection can be faster by turning on the setting that long press for 8 seconds to enter Bluetooth HID search.

[Bluetooth HID mode barcode] [pairing barcode]

[Long press for 8 seconds to enter Bluetooth HID search On* barcode] [Long press for 8 seconds to enter Bluetooth HID search Off barcode]

3. Bluetooth SPP/BLE Pairing Steps

1. Scan "Bluetooth SPP mode" setting code. When setting wireless Bluetooth SPP/BLE mode, it will automatically enter the SPP/BLE mode and enter the broadcast state by default.
2. Find "BarCode Bluetooth SPP/BLE" in the software.
3. Click Bluetooth device to enter pairing state.
4. Hearing a beep sound indicates that pairing succeeds.

[Bluetooth SPP mode barcode] [Bluetooth BLE mode barcode]

Bluetooth HID Upload Speed Settings

Please turn down the speed if the uploaded content is disordered or lost.

[High upload speed barcode] [Medium upload speed* barcode]

[Low upload speed barcode] [Ultra-low upload speed barcode]

Modify Bluetooth Name Settings

The following steps can be used to customize Bluetooth HID, SPP and BLE Bluetooth name.

Example: Set Bluetooth name to: Scanner.

1. Scan the "Customize Bluetooth name" setting code.
2. Generate and scan Bluetooth name barcode.

[Customize Bluetooth name barcode] [Example: Bluetooth name Scanner barcode]

After settings finished: Bluetooth HID name is displayed as Scanner HID; Bluetooth SPP name is displayed as Scanner SPP; Bluetooth BLE name is displayed as Scanner BLE.

Note: The length of the name can only be set up to 16 bytes. The scanner only takes the first 16 bytes as the Bluetooth name if the name barcode exceeds 16 bytes.

Scan Modes

[Trigger Mode* barcode] [Continuous Scan Mode barcode]

Beeper Volume

[Mute barcode] [High* barcode]

[Medium barcode] [Low barcode]

Vibration Settings

[Vibration On * barcode] [Vibration Off barcode]

Sleep Time Settings

[Sleep time 1min barcode] [Sleep time 5min* barcode]

[Sleep time 10min barcode] [Sleep time 30min barcode]

[Never barcode] [Sleep immediately barcode]

IOS System HID Virtual Keyboard Settings

[Double-click to display IOS keyboard function On* (HID mode) barcode] [Double-click to display IOS keyboard function Off (HID mode) barcode]

Terminators (Termination Suffixes)

[Carriage Return* (CR) barcode] [Line Feed (LF) barcode]

[CR & LF barcode] [Horizontal Tab barcode]

[None (Clear All Termination Suffixes) barcode]

Keyboard Language Setting

The keyboard layout and symbols corresponding to different languages are different. The scanner can be virtualized into different keyboard system of different countries according to the real-life requirements. The keyboard layout is suitable for HID communication interface mode. The default keyboard system is "American English keyboard".

Note: Please contact customer service if more national language settings are needed.

Supported Languages/Encodings:

• GBK encoding* [MS Notepad, Excel barcode]
• Unicode encoding [MS Word barcode]
• English* [English* barcode]
• German [German barcode]
• French [French barcode]
• Spanish [Spanish barcode]
• Italian [Italian barcode]
• Japanese [Japanese barcode]
• British English [British English barcode]
• International keyboard [International keyboard barcode]

Keyboard Conversion

[Conversion Off* barcode] [All Upper Case barcode]

[All Lower Case barcode] [Invert Case barcode]

Symbologies

Note: This parameter is only valid in standard keyboard input mode and keyboard simulation input control character mode.

Inverse Barcodes

[Regular Only barcode] [Both Regular and Inverse barcode]

UPC-A

[UPC-A* On barcode] [UPC-A Off barcode]

[check character transmit* barcode] [check character do not transmit barcode]

UPC-A barcode is fixed to 12 characters. The 12th character is the check character, which is used to check the correctness of all 12 characters. The default setting is to transmit the check character.

[*Leading character transmit On barcode] [Leading character transmit Off barcode]

UPC-E

[UPC-A to EAN-13 On barcode] [*UPC-A to EAN-13 Off barcode]

[UPC-E On* barcode] [UPC-E Off barcode]

[check character transmit On* barcode] [check character transmit Off barcode]

[*Leading character transmit On barcode] [Leading character transmit Off barcode]

[UPC-E to UPC-A On barcode] [*UPC-E to UPC-A Off barcode]

EAN-13

[EAN-13 On* barcode] [EAN-13 Off barcode]

Convert to ISBN

[Barcode information convert On barcode] [Barcode information convert Off* barcode]

Convert to ISSN

[Barcode information convert On barcode] [Barcode information convert Off* barcode]

UPC/EAN/JAN Addenda Settings

The addenda refers to the 2 or 5-digit digital barcode added after the normal barcode. As shown below, the barcode in the blue frame on the left is the normal barcode, the barcode in the red frame on the right is the addenda. The default setting is addenda off.

[2/5 digit addenda On barcode] [2/5 digit addenda Off* barcode]

[Mandate to contain addenda On barcode] [Mandate to contain addenda Off barcode]

Code 128

[Code 128 ON* barcode] [Code 128 OFF barcode]

Code 39

[Code 39 On* barcode] [Code 39 Off barcode]

[Full ASCII On barcode] [Full ASCII Off barcode]

[Check charater transmit On barcode] [*Check character transmit Off barcode]

[MOD43 Check On barcode] [MOD 43 Check Off* barcode]

[Start and stop characters transmit On barcode] [Start and stop characters transmit Off* barcode]

Code 32

Note: When Code 32 is turned on, code 39 will be affected. Code 32 Pharmaceutical can be read only when code 39 is allowed to read without check character.

[Code 32 ON barcode] [Code 32 OFF* barcode]

Codabar (NW-7)

[Codabar On* barcode] [Codabar Off barcode]

[Start and stop characters transmit On barcode] [Start and stop characters transmit Off* barcode]

Interleaved 2 of 5

[Interleaved 2 of 5 On* barcode] [Interleaved 2 of 5 Off barcode]

Matrix 2 of 5

[Check character transmit On barcode] [Check character transmit Off* barcode]

[Check On barcode] [Check Off barcode]

[Matrix 2 of 5 On* barcode] [Matrix 2 of 5 Off barcode]

MSI

[MSI On barcode] [MSI Off* barcode]

GS1 DataBar 14

[GS1 DataBar 14 On barcode] [GS1 DataBar 14 Off* barcode]

GS1 DataBar Limited

[GS1 DataBar Limited On barcode] [GS1 DataBar Limited Off* barcode]

Customize Prefix/Suffix Settings

This product supports up to 32 byte prefix/suffix settings.

Add Custom Prefix

1. Scan "Add custom prefix" setting code.
2. According to the prefix content to be added, query the "ASCII Table" and scan the corresponding setting code in order.

[Add custom prefix barcode]

Example: Set to add custom "789" to "ABC123" and output "789ABC123".

1. Scan "Add custom prefix" setting code.
2. According to the content to be added, query "ASCII Table" and scan the corresponding setting code of "7", "8" and "9".

Clear Custom Prefix

1. Scan "Add custom prefix" setting code.
2. Scan "Exit setting" setting code.

[Add custom prefix barcode] [Exit setting barcode]

Add Custom Suffix

1. Scan "Add custom suffix" setting code.
2. According to the suffix content to be added, query the "ASCII Table" and scan the corresponding setting code in order. (the content of escape character set needs to scan the corresponding 0-3 character set)

[Add custom suffix barcode]

Example: Set to add custom "XYZ" to "ABC123" and output "ABC123XYZ".

1. Scan "Add custom suffix" setting code.
2. According to the content to be added, query "ASCII Table" and scan the corresponding setting code of "X", "Y" and "Z".

Clear Custom Suffix

1. Scan "Add custom suffix" setting code.
2. Scan "Exit setting" setting code.

[Add custom suffix barcode] [Exit setting barcode]

Hide Prefix/Suffix Character

Set the digit of the hidden prefix/suffix according to the following steps, the digit is up to 4 digits.

1. Scan "Hide prefix" or "Hide suffix" setting code.

[Hide prefix barcode] [Hide suffix barcode]

Step 2: Scan the following barcode according to the digit of prefix or suffix that need to be hidden.

[Hide 1 digit barcode] [Hide 2 digits barcode]

[Hide 3 digits barcode] [Hide 4 digits barcode]

Clear Hidden Prefix/Suffix

1. Scan "Hide prefix" or "Hide suffix" setting code.
2. Scan "Exit setting" setting code.

Timestamp

If you want to add a timestamp to each scan, please scan either Time Prefix or Time Suffix. Please contact Tera customer service for time update tool if the timestamp doesn't show your local time.

[Show Current Time barcode]

[Time Prefix barcode]

[Time Suffix barcode]

[Clear Timestamp barcode]

Appendix-ASCII Table

The prefix/suffix settings are divided into two parts: control character table part and printable character table part. Printable character table can be output directly through HID keyboard without escape. Control character table cannot be directly output through HID keyboard, need to escape to output through HID keyboard. Users can set escape character set according to their own requirement.

[Set escape character set 0 barcode] [Set escape character set 1 barcode]

[Set escape character set 2 barcode] [Set escape character set 3 barcode]

Control Characters

Printable Characters