Instructions for spaDepot models including: SPA BLANKET ThermoFloat Blanket, SPA BLANKET, ThermoFloat Blanket, Blanket

ThermoFloat-Heavy-Duty-Spa-Bubble-Blanket-Instructions

SpaDepot.com

Installation Instructions

Floating Spa Blanket - Hot Tub Bubble Cover Blue 6'x6' – SpaDepot.com

Floating Spa Blanket - Hot Tub Bubble Cover Blue 8'x8' – SpaDepot.com


File Info : application/pdf, 1 Pages, 361.01KB

ThermoFloat-Heavy-Duty-Spa-Bubble-Blanket-Instructions ?v=1667327179
Ther moFl oat

TM
SPA BLANKET

Directions for Trimming and Use

SpaDepot.com

1. Using a tape measure, determine your spa's inside surface dimensions at the waterline.
2. Add about 2" to each dimension and record below:
Length + 2": Width + 2":
NOTE: Cutting the blanket about 2 inches larger helps keep it from shifting during the hot tub's filtration cycle.

3. Now lay your new ThermoFloat blanket, bubble-side down, onto a flat surface such as your lawn or indoors on a floor.
4. Mark the above dimensions on the smooth side of the blanket, using a marking pen.
5. Using scissors, trim to rough size, length and width.

6. Now place the roughly-trimmed ThermoFloat blanket in your filled spa, bubble-side down.
7. Using the marker, trace around rounded corners and any other spa features requiring a cutout or additional trimming.
8. Trim again as needed with scissors.
Cleaning
Every month or two, clean both sides with ecoTUB Spa Clean non-foaming cleaner. Then rinse with a garden hose and place back in spa, bubble-side down.

WARNING: Do not get on top of or swim under the floating blanket. Remove the blanket prior to using hot tub.

© SpaDepot.com

thermofloat-instructions.pdf (rev. 1-13-20)



References

Microsoft Publisher 2010