User Manual for LIFESPAN FITNESS models including: Regen8 Quadro Outdoor 4 Person Infrared Sauna, Regen8, Quadro Outdoor 4 Person Infrared Sauna, Outdoor 4 Person Infrared Sauna, 4 Person Infrared Sauna, Infrared Sauna

Download Product Manual

Regen8 Quadro Outdoor - 4 Person Infrared Sauna – Lifespan Fitness

Infrared Sauna


File Info : application/pdf, 24 Pages, 675.69KB

PDF preview unavailable. Download the PDF instead.

LSF Regen8 Quadro Outdoor Manual Digital
ReGen8 Quadro Outdoor 4 Person Infrared Sauna
USER MANUAL
Find the Digital Manual Online
Product may vary slightly from the item pictured due to model upgrades.
Read all instructions carefully before using this product. Retain this owner's manual for future reference.
NOTE: This manual should not be used to guide your purchasing decision. Your product, and the contents inside its carton, may vary from what is listed in this manual. This manual may also be subject to updates or changes. Updated manuals are available through our website at www.lifespanfitness.com.au

TABLE OF CONTENTS
I. Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 03 II. Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 04 III. Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 IV. Control Panel Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 V. Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 VI. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 VII. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
2 | TABLE OF CONTENTS

I. IMPORTANT SAFETY INSTRUCTIONS
For your safety, it is crucial to adhere strictly to the following precautions while using this product:
1. Ensure that children use the equipment under the supervision of an adult. Avoid playing with the equipment for safety reasons. 2. Do not insert objects such as fingers or sticks into the heating tube plate to prevent potential dangers. 3. Never pour water onto the equipment or the heating pipe (board). 4. Avoid using or storing flammable gases or liquids, such as hair spray, oil paint, gasoline, etc., in proximity to the equipment to prevent fire hazards. 5. Refrain from placing items inside or on top of the sauna. 6. Avoid touching the power control panel and any electrical components with wet hands to prevent the risk of electric shock. 7. It is strictly prohibited to use the equipment during thunderstorms to prevent electric shock. 8. Do not tilt the equipment and refrain from using sharp objects to strike it. 9. Shut down the equipment for at least an hour after continuous operation for 2 hours. 10. Avoid operating the equipment in a prolonged high-temperature environment. 11. Exercise caution when using the equipment after consuming alcohol. 12. Individuals with hemophilia or a tendency to bleed should avoid using the equipment. 13. Consult your doctor before using if you are currently experiencing illness or taking medication. 14. Do not use the equipment immediately after intense exercise; wait until your body temperature returns to normal. 15. If you experience any discomfort, cease using the equipment immediately. 16. Mind your head when entering and exiting the equipment. 17. Do not sleep inside the equipment while it is in operation. 18. Refrain from using any bath products in the sauna. 19. Avoid touching the heating element to prevent burns. 20. Keep the seat timber dry to prevent damage. 21. Ensure the floor heater remains dry to prevent excessive sweat dripping.
WARNING: Covering the heater or infrared emitter poses a fire risk! If you have any questions, please contact the supplier.
IMPORTANT SAFETY INSTRUCTIONS | 3

II. INSTALLATION PROCEDURE
a. Do not plug any other appliances into the outlet. b. Install the sauna on a completely level floor. c. Do not spray the exterior with water. If the floor is damp, install a floor separator to keep the sauna high and dry. d. Do not store flammable objects or chemical substances near the sauna.
1. Structure of Carbon Fibre FAR Infrared Sauna

12
11 10
7 2 3

8 9
1
6 5
4

1. Right Side Board 2. Digital Panel 3. Front Board 4. Bottom Board 5. Sitting Baffle

6. Sitting Board 7. Left Side Board 8. Back Board 9. Internal Top Board

10. Electric Control Panel 11. Roof Panels: 2x triangle support,
2x side panels 12. Waterproof Tiles

Make sure all parts are present before installing the unit. See packing list below.

A. User manual

G. Sitting board

M. Magazine bracket

B. Bottom board

H. Back rest

N. Towel bracket

C. Back board

I. Front board

O. Handle

D. Left side board

J. Internal top board

P. 2x Roof Side Panels

E. Right side board

K. Oxygen Ionizer

Q. 2x Roof Triangle Support Panels

F. Sitting baffle

L. Cup holder

4 | INSTALLATION PROCEDURE

III. ASSEMBLY INSTRUCTION
STEP 1. BOTTOM FLOOR ASSEMBLY Place the bottom board on a flat levelled surface of your desired location, and identify the front and back sections.

STEP 2. TAKE OUT THE RIGHT HALF OF THE BACK PANEL Identify the right half of the back panel and prepare to install.

ASSEMBLY INSTRUCTIONS | 5

STEP 2.1. FIX THE RIGHT HALF OF THE BACK PANEL Align the right half of the back panel with the bottom board's corresponding battens.
STEP 2.2. TAKE OUT THE LEFT HALF OF THE BACK PANEL Identify the left half of the back panel and prepare to install. 6 | ASSEMBLY INSTRUCTIONS

STEP 2.3. ASSEMBLING BACK PANEL Align the left half of the back panel with the bottom board's corresponding battens.
STEP 2.4. ASSEMBLE THE RIGHT PANEL Align the right board with the bottom board's corresponding battens. Ensure the right board fits flush into the backboard.
ASSEMBLY INSTRUCTIONS | 7

STEP 2.5. ASSEMBLE THE LEFT PANEL Align the left board with the bottom board's corresponding battens. Ensure the left board fits flush into the backboard.
STEP 3. LATCH ASSEMBLY The latch features a guide tab that needs to be aligned with the guide slot. Hold the back panel upright against the floor panel, carefully placing the tab into the slot without latching it yet. Once the back panel, left panel, and right panel are properly positioned on the floor panel, you can close and secure the latches with pins. 8 | ASSEMBLY INSTRUCTIONS

STEP 5. BENCH CHAIR ASSEMBLY Place the sitting baffle vertically and align with the battens on the back panel. Place the sitting board horizontally on corresponding battens. Repeat on the right side.

STEP 6. TAKE OUT THE RIGHT HALF OF THE GLASS DOOR Identify the right half of the glass door and prepare to install.

ASSEMBLY INSTRUCTIONS | 9

STEP 6.1. ALIGN THE FRONT GLASS DOOR Align vertically and ensure it sits flush with the right panel.
STEP 6.2. TAKE OUT THE LEFT PART OF THE GLASS DOOR Identify the left part of the glass door and prepare to install. 10

STEP 6.3. SECURE REMAINING LATCHES Identify the remaining latches and securely close them.
STEP 6.4. FINISH THE PROCESS OF THE GLASS DOOR The main structural component of the sauna is complete, check to see that all sections are properly aligned and all latches are secure. 11

STEP 7. TOP BOARD ASSEMBLY Position all wires outside to ensure enough space for setting up the top board (section 9). Open the door, raise the top board high enough to check if it aligns with the surrounding boards, then carefully lower it into place.
12

STEP 8. WIRE ASSEMBLY As you lower the internal top board into place, ensure that all the wires and connecting plugs mentioned above are guided through the corresponding holes in the top board. These wires will connect to the controller on the internal top board.
Guide the wires down into the sauna cabin.
Connect all wiring from the top board to the corresponding connectors for the control panel, temperature sensor, and radio antenna. Ensure that all connections are made, as missing any connections will prevent the sauna from functioning.

13 | ASSEMBLY INSTRUCTIONS

STEP 9. DOOR HANDLE ASSEMBLY
Install the door handle, towel rack, cup holder, and, if configured, the oxygen ionizer.

STEP 10. ROOF ASSEMBLY 1. All parts of roof have protruding blocks that need to be turned inwards when assembled. Before installing the back triangular support frame, the wires have to be put through the pre-drilled hole first. (same as two sides )
Back Roof
2. Install the triangular support frames on the front and rear sides of the roof and fix them with screws. Each side of the triangle piece requires one screw on the left side and one screw on the right side ­ a total of 4x screws (4x50mm).
ASSEMBLY INSTRUCTIONS | 14

Fig. 1: Right & Left - Side of the Roof Panel

Fig. 2

2. Fig. 1: Place the right roof steadily according to the corresponding wooden dowel holes, as shown in Fig. 2. Repeat the same for the left side of the roof. 3. The power cord is routed on the back panel. Plug into wall socket and turn on after assembly is completed.
4. Secure the waterproof tiles with four screws. (4*35mm) 15 | ASSEMBLY INSTRUCTIONS

1. PRECAUTIONS
a. Ensure all circuitry and plugs comply with safety standards and requirements. b. Set the temperature and time to a comfortable level before starting the session. c. Drink a glass of water before beginning your sauna session. d. After 2 hours of continuous use, allow the sauna to cool down by shutting it off for at least one hour. e. Avoid burns by not touching the heating element at any time.
2. OPERATION
a. Plug the ReGen8 Sauna into a 240v wall outlet only. Do not share the outlet with any other appliances. Use the ON/OFF switch to activate the sauna. When the sauna is not in use, unplug it from the outlet. b. Press the `Temperature' button to adjust the heat. If the `Heat' light is on, pressing the `+' button increases the temperature by one degree. Holding the button for three seconds will increase the temperature rapidly. To decrease the temperature, use the `-` button in the same manner. Once the desired temperature is reached, the `Heat' light will turn off. c. Press the `Light' button to turn the interior light on or off. d. If the sauna becomes too stuffy, open the ceiling vent or the front door for ventilation. e. After completing your sauna session, turn off the unit and unplug the power cable. f. To set the timer, press the `Function' button until the `Time' setting blinks. Use the `+' and `-` buttons to set the timer from 5 to 90 minutes. Holding the button for three seconds will increase the time more quickly. When the display reads `05,' the timer will buzz, and the sauna will shut off automatically after 5 minutes. To extend the sauna session, reset the timer.
CONTROL PANEL OPERATIONS | 16

IV. CONTROL PANEL OPERATION
Controller Brief Description
1. ON/OFF Button: ON: When you plug the unit into the electrical outlet, the power indicator will flash. Press the ON/ OFF button to turn the sauna on immediately. The LCD will display the last used settings for both temperature and time. OFF: During normal operation, press the ON/OFF button again to turn off the sauna. The unit will shut down, and only the power indicator will continue to flash.
2. Temperature Setting: When not using MP3/FM/BT display, press the temperature [up] or [down] button to adjust the temperature setting. Holding the [up] or [down] button will allow the temperature to increase or decrease continuously. After adjusting the temperature, the system will automatically exit the setting mode after about 5 seconds and return to displaying the current actual temperature.
3. Time Setting: When not using MP3/FM/BT display, press the time [up] or [down] button to adjust the time. Holding the [up] or [down] button will allow the time to increase or decrease continuously. After adjusting the time, the system will automatically exit the setting mode after about 5 seconds and return to displaying the actual temperature. When the time is set to "00," the heaters will stop, and a reminder sound will beep 5 times. 17 | CONTROL PANEL OPERATIONS

4. Fahrenheit/Celsius Settings: When adjusting the temperature, press both the [up] and [down] buttons simultaneously to toggle between Fahrenheit and Celsius.
5. Reading Light Control: In normal operation, press the light button once to turn the reading light on. Press it again to turn the light off. The reading light can also be controlled when the sauna is turned off.
6. Color Light Control: When the sauna is powered on, the color light will automatically illuminate. Press the color light button once to display a white light. Press the button repeatedly to cycle through the following colors: red, green, blue, yellow, purple, automatic color-changing mode, and back to off.
7. FM Radio: - Press the button once to enter FM radio mode. The screen will display the "F-" symbol along with the FM channel.
- Use the right-side "temperature +, -" buttons to change the channel, and the left-side "time +, -" buttons to adjust the volume.
- Press the play/pause button to pause or resume the radio. - The channel selection range is 76.0-108.0 MHz. When searching for stations, the temperature and time display windows will show the frequency being searched (e.g., 103.3). After about 5 seconds, the display will automatically return to showing the temperature and time.
8. MP3 Player: - Press the button twice to enter MP3 player mode. The screen will display the "P-" symbol, and the first song will begin playing.
- Use the right-side "temperature +, -" buttons to select the previous or next song, and the left-side "time +, -" buttons to adjust the volume.
- Press the play/pause button to pause or resume the MP3. - When selecting songs using the "temperature +, -" buttons, the temperature display window
will show the track number, and the time display window will show the current track details. After about 5 seconds, the display will automatically return to showing the temperature and time.
CONTROL PANEL OPERATIONS | 18

9. Bluetooth:

- Press the

button three times to enter Bluetooth mode. The screen will display "B-". After hearing a

sound, search for the Bluetooth name on your mobile device to connect.

- Once connected, you can play music from your mobile phone. Use the play/pause button to

control playback.

- To adjust the volume, use the left-side "Time +, -" buttons.

- After 5 seconds, the display will automatically return to showing the temperature and time.

- The effective Bluetooth range is 10 meters. If playback fails after connection, disconnect Bluetooth on

your mobile phone, unplug and re-plug the sauna, then reconnect via Bluetooth.

10. Switching Between FM/MP3/Bluetooth: This button allows you to switch between FM radio, MP3, and Bluetooth modes.
11. Heater Control: - This button turns all heaters on or off. After pressing the ON/OFF button to activate the sauna, press this button to start the heaters. - If the display shows "--", it means the heaters are not working.

19 | SAFETY PRECAUTIONS

Safety Precautions
a. To avoid the risk of fire, do not dry clothes or leave towels inside the sauna. b. To prevent burns or electric shocks, avoid touching or using metal tools on the net cover of the Carbon heater elements. c. While inside the sauna, do not touch the light bulb. If the bulb needs replacement, turn off the sauna and wait until the unit and bulb are completely cool before proceeding. d. Do not spray water on the Carbon heater tubes, as this could cause electric shock or damage the heater elements. e. Do not use the Sauna if you have any of the following conditions: - Open wounds - Eye diseases - Severe sunburns - Elderly and weak individuals, especially those suffering from illness, pregnant women, and infants should not use the sauna. Children over the age of 6 may use the sauna under adult supervision. - If you have a medical condition sensitive to temperature changes, consult your doctor before using the sauna. - Do not place pets inside the sauna. - Do not use the sauna while under the influence of alcohol.
SAFETY PRECAUTIONS | 20

V. TROUBLESHOOTING

Number 1 2
3
4 5 6 7

Problems

Possible reasons

Countermeasure

Power indicator light not working

The socket is not functioning properly
The fuse is burned out

Check the power supply and socket to see if replacement is
necessary
Replace the fuse

Function indicator light not working

The indicator light is faulty
A circuit or accessory related to the function is broken

Repair or replace the control panel
Repair or replace the circuit or accessories related to the
malfunctioning function

The heater is broken
The heater's lifespan has decreased from frequent use

Replace the heater with a new one of the same specifications

Carbon heater is not producing heat or

The fuse is burned out

carbon rays

Incorrect circuit connection for the

heater

Replace the fuse with one of the same specifications
Check and reconnect the circuit tightly

The circuit or accessories related to the control panel are broken

Repair or replace if necessary

Abnormal temperature inside
the sauna room

Heater malfunctions
Incorrect operation settings Faulty circuit or temperature
control accessories

Replace the heater with a new one of the same specifications
Reset the settings
Repair or replace the control panel

Unusual smell or noise inside the
sauna

Circuit problems (e.g., broken accessories, short circuit, or
control system failure)

1. Cut off the power and check the power supply and voltage
2. Identify the faulty components 3. Fix the issue

Bulb filament is burned out

Replace the bulb

Light not working

Bulb or lamp fixture is loose

Replace the bulb and raise the reed in the lamp fixture, tighten
the bulb, and reconnect it properly

Socket is broken

Replace the socket

Electrical control panel issue

Repair or replace the control panel

No sound from the speakers

Speaker is broken

Replace the speaker with a new one of the same specifications

Loose electrical connection

Reconnect and secure the electrical connection

21 | TROUBLESHOOTING

VI. MAINTENANCE
CLEANING:
- Clean the faceplate using a damp towel. If necessary, use a small amount of hand soap mixed with warm water. - Clean the sauna room with a damp cotton towel and dry it with a clean, dry towel. - Do not use benzene, alcohol, or strong cleaning chemicals on the sauna, as they may damage the wood and its protective layer.
IMPORTANT NOTE:
Do not leave the sauna or the music player on for more than 2 hours at a time.
TRANSPORTATION & STORAGE
1. Avoid exposing the sauna to rain, snow, or any strong impacts during transport. 2. Store the sauna in a dry environment; do not store it in damp or humid areas.
PACKING LIST
1 x Carbon sauna room with floor 10 x Carbon Fibre Infrared Heating Panels (2640W) 2 x Cup shelves 1 x Light bulb 1 x Light housing 1 x Music player and 2X Speakers 1 x Interior control panel cover 1 x Backrest 1 x Bag of screws and bolts 1 x door Hand & screwdriver 1 x Instruction manual 1 x Oxygen Ionizer
MAINTENANCE | 22

VII. WARRANTY
AUSTRALIAN CONSUMER LAW Many of our products come with a guarantee or warranty from the manufacturer. In addition, they come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Full details of your consumer rights may be found at www.consumerlaw.gov.au. Please visit our website to view our full warranty terms and conditions: http://www.lifespanfitness.com.au/warranty-repairs WARRANTY AND SUPPORT Any claim against this warranty must be made through your original place of purchase. Proof of purchase is required before a warranty claim may be processed. If you have purchased this product from the Official Lifespan Fitness website, please visit https://lifespanfitness.com.au/warranty-form For support outside of warranty, if you wish to purchase replacement parts or request a repair or service, please visit https://lifespanfitness.com.au/warranty-form and fill in our Repair/Service Request Form or Parts Purchase Form. Scan this QR code with your device to go to lifespanfitness.com.au/warranty-form
23| WARRANTY

WWW.LIFESPANFITNESS.COM.AU



References

Adobe PDF Library 17.0 Adobe InDesign 19.5 (Windows)