Do-It-Yourself Filter Replacements

Turn off water supply. Remove the old cartridge from the manifold by rotating it to the left [rotate left] until it unlocks. Pull cartridge down [pull down] and discard.

Remove new cartridge from packaging. Ensure all connection points are aligned before attaching new cartridge to the manifold. Push in the cartridge and turn to the right [rotate right] until it locks into place.

Turn on the water supply to pressurize the system and ensure there are no leaks. Ensure all connections are aligned and cartridge is securely attached prior to turning on water supply.

Please review manual for full replacement instructions.

Diagram Descriptions

Filter Removal: The diagram illustrates removing an old filter cartridge. It shows a curved arrow indicating a leftward rotation to unlock the cartridge, followed by a straight downward arrow signifying pulling the cartridge away from the manifold.

Filter Installation: The diagram shows installing a new filter cartridge. A straight upward arrow indicates pushing the cartridge into the manifold, and a curved arrow signifies a rightward rotation to secure it in place.