Starry Sky Projection Light Instruction Manual

1. Basic Functions

• 7 Colorful lights
• Bluetooth Music
• USB drives play MP3 music
• Water wave laser star pattern light
• Built-in charging (optional)

2. Functional Description

2.1 On/OFF: Switch the product to the "OFF" position to shut down; switch to the "ON" position to start up. The default startup mode is Bluetooth, and the stage lights will be active.

2.2 Mode Switch: Long press the MODE key to turn on/off the laser light; short press the LIGHT key to turn on/off the LED colorful light.

2.3 Music Control: Use the ⏪ button for previous music/volume reduction; the ▶️/⏸️ button for play/pause; and the ⏩ button for next song/volume down.

3. Bluetooth Connection Method

1. Start up or press the mode key to switch to Bluetooth mode. The Bluetooth indicator will emit a signal, and the LED indicator light will flash.
2. Turn on the Bluetooth function of your mobile device (e.g., mobile phone, computer) and search for the Bluetooth device named "XKL-Q5".
3. Manually click to connect. The device will automatically pair and connect. A "Bluetooth" sound will be emitted upon successful connection.
4. Devices that have been successfully paired will automatically connect the next time they are turned on.

4. Play Music Operation

Upon startup, the device automatically detects and identifies external devices. It defaults to Bluetooth mode. Inserting a USB flash drive will automatically recognize and play MP3 music; the USB drive playback takes precedence.

5. Indicator Light Introduction

• Red Indicator Light: Charging indicator. The light is on when charging and off when the battery is fully charged.
• Blue Indicator Light: Indicates Bluetooth mode, USB flash mode, or low power status (shutdown indicator).

6. Function Introduction of Remote Control

The remote control provides access to various functions:

• Mode Switch: Press the MODE button to cycle through modes.
• Music Control:
  • MUSIC: Music switch.
  • ⏪: Previous song / Volume reduction.
  • ▶️/⏸️: Play/Pause.
  • ⏩: Next song / Volume increase.
  • VOL-: Decrease volume.
  • VOL+: Increase volume.
  • COLOR: Cycle through colors.
• Light Control: Press the LIGHT button to turn LED lights on/off. Long press to turn laser lights on/off.
• Color Selection: Dedicated buttons for Red light, Green light, Blue light.
• Voice Control: Three effects available via SOUND 1, SOUND 2, SOUND 3 buttons.
• Timer: Set the device to turn off automatically after 30 minutes.
  • Successful timer activation: White light flashes 3 times (⚪⚪⚪).
  • Timer cancellation: Red light flashes 3 times (???).
• Motor Speed Regulation: Adjust the speed of motor rotation.

The remote control is designed for intuitive operation of lighting modes, music playback, volume, and timer functions.

7. Technical Parameters

8. Packing List

• Starry sky projection lamp: 1 PCS
• Operation instruction: 1 PCS
• USB cable: 1 PCS

Special Remarks

• As laser is harmful to the eyes, do not look directly at the laser light.
• Children under 8 years of age are prohibited from using the product alone without adult supervision (except for non-laser type).
• Please turn off the power when the unit is not in use for an extended period.
• When the battery is low, the system will shut down automatically. Please charge it in time. If the unit is not used for a long time, charge it at least once a month to protect the battery and extend its lifespan.

FCC Compliance Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.