SHOWER ROOM DRAIN

Shower drains are available with round, square, or rectangular grates of different sizes to provide the desired drainage capacity or shape. This drain is provided with a seepage flange and clamping means to secure the waterproofing membrane to the floor drain body. The strainer is vertically adjustable to accommodate variations in finished floor thickness. The strainer at floor level is typically polished Stainless Steel (suffix -3), with Polished Nickel Bronze (suffix –1) as an optional finish.

Diagrams: The F1000C model is shown with a clamping collar securing a waterproofing membrane to the drain body, alongside a cleanout fitting. The F1000 model illustrates a floor drain with a clamping collar and grate, installed in a concrete slab.

UNIVERSAL FLOOR DRAIN

This universal floor drain is suitable for areas where traffic loads (pedestrian or vehicular) may be heavy. It is designed for use in shower or toilet rooms, as well as any other finished or unfinished floor area. The drain is furnished with a round or square heavy-duty stainless steel grate to prevent dishing. Optional variations include a trap primer tapping, internal sediment bucket, internal backwater valves, and top funnels for indirect waste drainage.

Diagram: A general purpose floor drain (F1320) is illustrated, featuring a sediment bucket to retain debris and an adjustable body collar for vertical adjustment to the finished floor level.

INDIRECT WASTE DRAIN

The F1100-EG model features an oblong funnel to provide an indirect waste connection. These drains are primarily used for condensate-producing equipment or other mechanical equipment where a direct connection is not desired or permitted. The funnels are available in a round design for single-pipe waste and oblong sizes for multi-pipe waste lines.

Diagram: The F1100-EG is depicted with an oblong funnel for multi-pipe waste lines, showing seepage openings at the base.

GENERAL PURPOSE FLOOR DRAIN

This floor drain is suitable for applications where traffic loads and wastewater flows are anticipated. It includes provisions for securing waterproofing membranes to the drain body and allows for final vertical adjustment to the finished floor level via an adjustable body collar. Optional variations include a sediment bucket to retain debris, and round or square polished grates and top frames.

Diagram: The F1320 model is illustrated, showing a sediment bucket and an adjustable body collar.

INTEGRAL TRAP FLOOR DRAIN

This floor drain features an integral deep seal trap and a No Hub side outlet connection, making it ideal for floor areas built on grade with shallow sewer lines. The drain body includes a floor level cleanout opening. Optional variations include a sediment bucket, seepage or anchoring flange, and an internal backwater valve for back-flow protection.

Diagram: The F1140C model is depicted, showing its integral deep seal trap, No Hub side outlet, and floor level cleanout opening.

FLOOR DRAIN WITH SURFACE MEMBRANE CLAMP

This floor drain is designed for installations requiring a waterproof seal at the grate level. The adjustable strainer features a two-piece beveled nickel bronze top that securely clamps the top flashing material to the drain, ensuring a watertight joint.

Diagram: The F1100-FC model is illustrated, showing the surface membrane clamp mechanism with the two-piece beveled nickel bronze top securing the surface membrane.

PIT DRAIN

This drain is used in elevator pits, pools, and trenches where a side wall outlet is required. The angle grate is positioned in the wall to prevent blockage by debris. It is supplied with a gasketed seal type backwater valve to prevent the backflow of wastewater into the pit or sump.

Diagram: The BV-1210 model is shown installed in a pit or trench with a side wall outlet, featuring an angle grate and a backwater valve assembly.

WIDE FLANGE DECK DRAIN

Special drains are available for thin deck or floor covering applications. A 4-inch wide flange, recessed to match the deck covering thickness, provides a large bearing surface for bonding neoprene, latex, or similar waterproof deck materials. This type of deck finish is common in traffic areas like promenade decks, plazas, recreation areas, and interior floors.

Diagram: The F1100-Z model is depicted with a thin deck covering and a wide elastomeric flange.

FLUSHING RIM FLOOR DRAIN

A flushing rim floor drain is recommended for use in mortuaries, prison wards, hospitals, sanatoriums, and veterinary establishments where sanitary wastes are disposed of through a floor drain. The interior surface is coated for maximum sanitation. The flushing connection enters the body tangentially, providing a peripheral washing action to clear the inner surface of sanitary waste. Various grate types are available; a perforated hinged grate is recommended for intercepting solids with fluids, while a loose-set or secured 'oriental' bar-type grate is suitable for areas with both solid and fluid wastes.

Diagram: The F1650 model is shown with a 1/2" flushing connection, a vacuum breaker, and a perforated hinged grate.

GARBAGE CAN WASHING DRAIN

This drain functions as both a floor drain and a garbage can washer. It includes a spray nozzle designed to thoroughly scour the inside of garbage cans. The top grate and a large sediment bucket intercept waste debris. A 1/2" water supply connection is provided on the drain body for hot, cold, or mixed spray water. The water supply should be connected via a vacuum breaker and control valve accessible to cleaning personnel. (Refer to catalog pages F90, F1660 for more details).

Diagram: The F1350-Y-36 model is illustrated, featuring a spray nozzle, a perforated sediment bucket, and a 1/2" water supply connection.

HEAVY DUTY ROADWAY DRAIN

This drain is recommended for outdoor areas such as yards, airports, and parking lots that experience heavy vehicular traffic and require high drainage capacity, especially during rainfall. The standard heavy-duty cast iron grate supports a maximum load capacity of 12,000 lbs. With a Ductile Iron grate, the load capacity exceeds 25,000 lbs.

Diagram: The F1580 model is shown with a secondary dome strainer.

PLANTING AREA DRAIN

While not strictly a floor drain, this product is included for use in planting areas or flower boxes, indoors or outdoors, where drainage of excess moisture is needed without soil loss. The perforated adjustable standpipe and dome can be positioned as shown or extended to finished grade for easier access for rodding. The drain body is designed to secure the planter floor pan or waterproofing membrane.

Diagram: The F1830-P model is illustrated, showing a perforated adjustable standpipe and dome, a clamping collar, and a waterproofing membrane, designed to retain soil while facilitating moisture drainage.