Defender Boomer 20 Wireless Speaker
This document provides instructions for the Defender Boomer 20 wireless speaker.
Introduction
Welcome to your new Defender Boomer 20 wireless speaker. This portable speaker delivers powerful sound and convenient Bluetooth connectivity for an enhanced audio experience.
What's in the Box
Your Defender Boomer 20 package should contain the following items:
- Defender Boomer 20 Wireless Speaker
- USB Charging Cable
- User Manual (this document)
Product Overview
The Defender Boomer 20 features a compact and durable design. The front of the speaker is dominated by a protective grille covering the audio drivers. On the top panel, you will find the control buttons and charging port.
Control Buttons
- Power Button: Press and hold to turn the speaker on or off. A short press may indicate status.
- Play/Pause Button: Press to play or pause music playback.
- Volume Down/Previous Track Button: Press and hold to decrease volume. A short press skips to the previous track.
- Volume Up/Next Track Button: Press and hold to increase volume. A short press skips to the next track.
- Bluetooth Pairing Button: Press to initiate Bluetooth pairing mode.
Ports
- Micro-USB Charging Port: Used for charging the speaker's internal battery.
Getting Started
Charging the Speaker
Before first use, it is recommended to fully charge the speaker.
- Connect the included USB charging cable to the Micro-USB port on the speaker.
- Connect the other end of the USB cable to a compatible USB power source (e.g., a wall adapter, computer USB port).
- A charging indicator light will illuminate, typically red, while charging. The light will turn off or change color when charging is complete.
- A full charge typically takes 2-3 hours.
Powering On/Off
- To Power On: Press and hold the Power Button until an indicator light or sound confirms the speaker is on.
- To Power Off: Press and hold the Power Button until the speaker turns off.
Bluetooth Connectivity
The Defender Boomer 20 uses Bluetooth technology to wirelessly connect to compatible devices.
Pairing a Device
- Ensure the speaker is powered on and within range of your Bluetooth-enabled device (e.g., smartphone, tablet).
- Activate the Bluetooth pairing mode on the speaker by pressing the Bluetooth Pairing Button. The speaker may emit a sound or flash an indicator light to show it is in pairing mode.
- On your Bluetooth device, open the Bluetooth settings and search for available devices.
- Select "Defender Boomer 20" from the list of found devices.
- If prompted, enter a pairing code (usually "0000" or "1234").
- Once successfully paired, the speaker will indicate a connection, and you can begin playing audio.
Reconnecting
The speaker will automatically attempt to reconnect to the last paired device when powered on, provided Bluetooth is enabled on that device.
Audio Playback
Once connected via Bluetooth, you can control music playback using the speaker's buttons or your connected device.
- Play/Pause: Press the Play/Pause button on the speaker.
- Next/Previous Track: Press and hold the Volume Up/Down buttons respectively.
- Volume Control: Press and hold the Volume Up or Volume Down buttons to adjust the volume.
Specifications
| Feature | Specification |
|---|---|
| Model | Boomer 20 |
| Brand | Defender |
| Connectivity | Bluetooth |
| Power Output | 20W |
| Charging Port | Micro-USB |
| Color | Black (as per description) |
Troubleshooting
If you encounter issues, try the following:
- No Sound: Ensure the speaker is powered on, charged, and connected via Bluetooth. Check the volume level on both the speaker and your device.
- Cannot Pair: Make sure the speaker is in pairing mode and no other devices are actively connected. Try restarting both the speaker and your device.
- Poor Sound Quality: Ensure your device is within Bluetooth range and there are no obstructions.
Safety Information
- Do not expose the speaker to water or extreme temperatures.
- Avoid dropping the speaker.
- Use only the provided charging cable.
- Keep out of reach of small children.
