Instructions for Spiny models including: V07, V07 Mountain E-Bike, Mountain E-Bike, E-Bike

Spiny Compatibility Template V07 A1

Opción A1

Spiny de verificación para bicicletas sin cable en el tubo del sillín: Utiliza esta plantilla para comprobar fácilmente si tu bicicleta es compatible cuando no hay cables presentes en el tubo del sillín.Opción A

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 3 Pages, 2.45MB

Document Document

TEMPLATE TO CHECK THE COMPATIBILITY OF YOUR BIKE WITH SPINY
Bicycles without derailleur cable in the seat tube.
8.1 cm
Image 1
c
A1
Image 2

To verify that Spiny is compatible with your bicycle, follow these instructions:
1. Print the Templates: Make sure to print the templates at their original size (100% scale). Avoid any resizing or scaling adjustments in the print settings.
2. Cut Out the Templates: Use scissors or a craft knife to carefully cut along the dotted line indicated on the template. This will allow you to use the cut-out section to check the fit on your bicycle.
3. Align the Templates: Template A1 should be positioned so that it touches both the bicycle tire and the frame tube. Then, you should be able to place template C by touching the frame tube with the numbered side and aligning one of the 6 positions with the two mounting lines on template A1, without interfering with the bicycle frame. NOTE: You can use adhesive tape to help hold the templates in place during this process.
4. Check Compatibility: If the templates fit well as shown in Diagram 2 and match the required dimensions, it is likely that your bicycle is compatible with Spiny.

20 cm

11 cm

C

1

2

3 4

5 6

8.5 cm

Posición Montaje

5.8 cm
A1