Instructions for SAFAVIEH models including: TBL4444A Rattan Table Lamp, TBL4444A, Rattan Table Lamp, Table Lamp, Lamp
SAFAVIEH TBL4444A 195058175258 0195058175258 1007526785
CARE AND MAINTENANCE Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish. NOTICE& IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed **This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature. Model#: TBL4444A Product Dimensions: 16"L X 16"W X 26"H Part List and Hardware List PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY A Lamp base 1X E Harp 1X B Neck 1X F Shade 1X C Saddle 1X G Finial 1X D Socket 1X H Bulb PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes. PLEASE USE ON/OFF TYPE"A" BULB MAX 100-WATT OR CFL BULB MAX 23-WATT OR LED BULB MAX 12-WATT THERE IS LED 9-WATT BULB IN THE BOX 2G F 3 B E H D C A Step 1 Pull power cord to connect the Neck (B)to the Base (A). Screw the Neck (B) onto the Lamp base (A) Be careful not to twist the power cord and tighten securely Step2 Step3 Insert the Harp (E) into the Saddle (C). Put the light on a level surface to check Put the shade(F) on the Harp(E),then if everything is stable. tighten the Finial (G)into the Harp (E) Insert the bulb(H)(bulb not included) into the socket(D). ENJOY YOUR LAMPWPS 表格