Kensington Elevated Stand for Surface

This document provides setup instructions and product information for the Kensington Elevated Stand for Surface.

Inside the Box

The following items are included with your Elevated Stand for Surface:

One Elevated Stand for Surface
One Drawstring Carrying Bag
One Magnet Notice Insert
One Installation Guide
One Warranty Card

Installation and Setup

Step 1: Unfolding and Folding the Stand

To unfold the stand, locate the hinge button on the side. Press this button and pull up on the frame to open the stand. To fold the stand, press the hinge button again and push the frame down until it lies flat. Once flat, the stand can be stored in the included drawstring carrying bag.

[Diagram Description: Shows unfolding the stand by pressing a hinge button and pulling the frame up. Then shows folding the stand by pressing the button and pushing the frame down.]

Step 2: Attaching Your Surface

2a. Alignment: With the stand in its upright position, align the kickstand of your Surface device with the slot located on the top of the stand. Ensure the screen of your Surface faces the side of the stand's frame that has the non-slip pad for accessories.

[Diagram Description: A Surface tablet is aligned with the stand's top slot.]

2b. Securing the Kickstand: Slide the Surface's kickstand down into the slot on the stand until it is fully seated.

[Diagram Description: The Surface's kickstand is slid down into the stand's slot.]

2c. Verification: Double-check that the kickstand is properly inserted and your Surface is securely held in place.

[Diagram Description: The Surface is securely attached to the stand, marked with a checkmark (✔️).]

Step 3: Storing Your Surflink Connector

3a. Removal: If applicable, remove the Surflink Connector from your Surface device.

[Diagram Description: A Surflink connector is detached from a Surface.]

3b. Magnetic Storage: Align the Surflink Connector with the magnetic storage location found on the side of the stand. Connect it to the magnetic spot.

[Diagram Description: The Surflink connector is aligned with and attached to the stand's magnetic storage.]

3c. Benefit: The dedicated magnetic storage location ensures your Surflink connector is kept secure and readily accessible.

[Diagram Description: The Surflink connector is magnetically attached to the stand, marked with a checkmark (✔️).]

Securing the Stand and Your Surface

For enhanced security, Kensington recommends using a compatible cable lock. The K68136WW Keyed Cable Lock for Surface Pro and Surface Go, or the K68130WW Combination Cable Lock for Surface Pro and Surface Go, are suitable options (locks sold separately).

To secure your device, attach the cable lock head to the Surface through the designated slot located on the back of the stand.

[Diagram Description: The stand holds a Surface, with a cable lock attached to the Surface and routed through the stand's back slot.]

Product Features

The top surface of the stand's base features an anti-slip material. This design allows users to store accessories, such as smartphones or earbuds, on the base while minimizing the risk of them slipping off.

This anti-slip feature is described in multiple languages, including English: "Anti-slip surface on top of base allows user to store accessories such as smartphones or earbuds on the top of the base minimizing slipping."

Support

For support and further assistance, please visit kensington.com/support.

	Kensington Elevated Stand for Surface™ - User Guide and Setup Concise instructions and information for the Kensington Elevated Stand for Surface™. Learn how to set up and use the stand for your Microsoft Surface device, including features and compatible accessories.
	Kensington K62055WW Keyed Cable Lock - Specifications and Product Information Detailed specifications, product information, packaging details, and compatibility for the Kensington K62055WW keyed cable lock, designed for Microsoft Surface devices. Includes warranty, dimensions, and shipping details.
	Kensington Locking Kit for Surface Studio and Surface Studio 2 \| K67975WW Security Secure your Microsoft Surface Studio and Surface Studio 2 with the Kensington K67975WW locking kit. Features Cleat™ Locking Technology, carbon steel cable, and limited lifetime warranty for enhanced device protection.
	Kensington FP10 Privacy Screen for Surface Go and Surface Go 2 Protect your sensitive information on Microsoft Surface Go and Surface Go 2 with the Kensington FP10 Privacy Screen. This screen limits viewing angles to +/- 30 degrees, reduces blue light, and prevents scratches.
	Kensington SD6000 Surface Go Docking Station: Quick Start and Installation Guide Comprehensive guide to setting up and using the Kensington SD6000 docking station for Microsoft Surface Go and Surface Go 2 devices. Includes connection instructions, peripheral support, display capabilities, and Kensington security lock compatibility.
	Kensington MagPro™ Elite Magnetic Privacy Screen for Surface Laptop Protect your privacy with the Kensington MagPro™ Elite Magnetic Privacy Screen, designed for 13.5" and 15" Surface Laptops. Features dual-sided matte/glossy surfaces, +/-30° viewing angle, blue light reduction, and touch/pen support.
	Kensington Product Catalog: Security, Connectivity, Ergonomics & More Explore the comprehensive Kensington product catalog featuring advanced security solutions, high-performance docking stations, ergonomic accessories, audio-visual equipment, and input devices designed for professionals.
	Kensington SD5765T Thunderbolt 4 Dual 4K Docking Station (DFS) - Enhanced Productivity Discover the Kensington SD5765T, a Thunderbolt 4 docking station designed for Microsoft Surface devices. Offering dual 4K displays, 96W power delivery, 40Gbps data transfer, and a comprehensive suite of ports for enhanced productivity.