PORT CONNECT Bluetooth + Wireless Rechargeable Expert Mouse User Manual

Product Overview

The PORT CONNECT Bluetooth + Wireless Rechargeable Expert Mouse offers dual 2.4 GHz radio and Bluetooth connectivity. It features a 1000/1600/2400 DPI optical sensor and includes 6 buttons. The mouse is rechargeable via USB-C. Its dimensions are 11.5 x 8.1 x 4.8 cm and it weighs 102 grams.

Mouse Components Diagram

1. Left click button
2. Right click button
3. Scroll wheel
4. DPI button
5. Mode button (BT1/BT2/USB)
6. LED indicator
7. USB receiver storage compartment
8. ON/OFF switch
9. USB-C charging port

Instructions

Turning on the Mouse

1. Open the mouse cover.
2. Insert the battery into the designated slot. If the battery has a protective plastic film, remove it before insertion.

The mouse has dual 2.4 GHz and Bluetooth radio connectivity. Follow the steps below to connect the mouse to a device:

2.4 GHz Wireless Connection

1. Open the mouse cover.
2. Remove the nano USB receiver and insert it into a USB port on the computer.
3. Turn the mouse switch to "ON".
4. Press the mode button on the mouse and select "USB mode".
5. The mouse will automatically configure with the device.

Bluetooth® Connection

1. Turn the mouse switch to "ON".
2. Press the mode button on the mouse and select "BT1 mode" or "BT2 mode".
3. Keep the mouse button pressed for 3 to 5 seconds until the LED light starts flashing. The mouse is now in pairing mode.
4. Configure the Bluetooth® parameters on the device using its Bluetooth instructions or documentation to establish the Bluetooth connection.

Warning

• Keep the product away from water, fire, liquids, and out of reach of children.
• Avoid exposing the product to prolonged periods of extreme heat or cold.
• Only qualified personnel should replace the product to avoid danger. Do not disassemble or attempt to repair this product yourself.
• This product complies with IEC/EN 60825-1: 2008-05. It is a Class 2 laser device that emits laser radiation: do not stare into the beam or aim the beam at eyes/faces.

Troubleshooting

If the unit appears not to be working, check the following:

• Verify that the batteries are charged and that the polarity is respected.
• Verify that the receiver is correctly plugged into a working USB port and that the setup is complete.
• If the setup is not complete, remove the USB receiver, restart the computer, and plug in the USB receiver again, then wait for the setup to complete.

Product Registration

PORT EUROPE recommends registering the product soon after purchase on the website: http://www.port-connect.com

Technical Support

For technical questions concerning the product, please visit the contact/support section on the website: http://www.port-connect.com

Declaration of Conformity

This declaration of conformity is issued under the sole responsibility of the manufacturer.

PORT EUROPE, located at 22 rue de la Fédération 75015 PARIS France, declares that this product complies with the essential requirements and provisions of CE and conforms to the standards, directives, and specifications mentioned below:

• RED Directive 2014/53/EU
• EN 301 489-1 V2.2.3
• EN 301 489-3 V2.3.2
• EN 301 489-17 V3.2.4
• EN 55032: 2015+A11
• EN 55035: 2017+A11
• EN 300 328 V2.2.2
• EN 300 440 V2.1.1
• EN 62479:2010
• LVD Directive 2014/35/EU
• EN 62368-1:2020+A11:2020
• RoHS Directive 2011/65/EU & revision 2015/863/EU

Eric RAMPI
09/10/2023, Paris

European Directive 2012/19/UE (WEEE)

The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE) requires that old household electrical appliances must not be disposed of in the normal municipal waste stream. Old appliances must be collected separately to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed-out wheeled bin symbol on all products reminds consumers of the obligation for separate collection. Consumers should contact their local authority or retailer for information concerning the correct disposal of their product.

♻