English Version

Working Principle:

This product is designed based on the principle of skin cleaning via ultrasonic high-frequency vibration. Ultrasonic wave is a high-frequency mechanical vibration wave, which has found wide applications in the field of medical care and beauty. The mechanical wave is capable of mechanical, heating, and catalytical functions, which can generate a soft vibration effect on the skin via the joint effect of low energy and high-frequency vibration. This can enhance the cell vigor and transparency of all cortex tissues, dredge sweat glands and narrow down pores.

The strong molecular frictions, which are 24,000 times every second, can pulverize the water drops. The pulverized water drops can then remove the stains and blackheads deep inside the skin to achieve the effect of deep skin cleansing. At the same time, the user can see the phenomenon which is similar to the pulverization of water drops. This is a highlight of our product. The deep-layer friction achieved through high-frequency vibration can help improve the micro-cycling in the fat movement process. The fat cell can be burnt to achieve the cleansing of metabolites.

User Guide

Moisture This product is designed based on the ultrasonic pulverization of water drops. During the use process, moisture can be generated, which is a normal phenomenon. Please use it without any worry.
Battery If the product cannot be started even after a long press on the power button. Please charge the equipment with the electricity. If the equipment gives out sounds like "bi-bi-bi", it means the battery is inadequate, and the equipment will power off automatically.
Temperature In the process of operation, the high-frequency vibration of the shovel can reach the highest temperature of 42°C. Under the temperature, the skin will not be injured. But the allergic skin should reduce the use time and use frequency.
Charge The equipment takes around 150 minutes to get fully charged. (Upon the first use, please charge it for more than 5 hours.)
Use frequency The skincare period is 28 days. Please use it two to three times a week to achieve better effects.
Cleaning Don't soak the instrument in the water or directly rinse it using tap water. Please use a soft cloth to clean the blade.
Contraindications Females who are pregnant or during the menstrual period, people who have skin diseases or whose skin is seriously suntanned, and people who are still recovering from an operation.

Two silicone covers are included:

Precautions:

List of components:

Components: Dust cover, GUGUG logo, On button/Function selection button, Metal ion bar, Cleaning Mode indicator, Lifting Mode indicator, Ion+ Mode indicator, Ion- Mode indicator, USB cable.

Introduction of functions:

Cleaning Mode

Description: This mode is for deep cleaning the skin.

Steps:

  1. Clean your face with a facial cleanser and then use a facial steamer or hot towel to open pores.
  2. Choose "Cleaning" mode. Hold the spatula downwards close to the skin at a 45-degree angle.
  3. Keep your face moist during the full treatment.
  4. Use frequency: 2 to 3 times/week, 3-5 minutes/time. Blackheads can be removed through ultrasonic vibration, effectively cleaning facial pores.

Lifting Mode

Description: This mode is for lifting and firming the skin.

Steps:

  1. Use repair facial cream or anti-aging essence.
  2. Choose "Lifting" mode. Hold the spatula upwards close to the skin at a 45-degree angle.
  3. Keep your face moist during the full treatment.
  4. Use frequency: 2 to 3 times per week, 3-5 minutes per time. EMS pulse micro-current will be generated to reach the skin bottom through the spade head to stimulate the regeneration of collagens and to tighten the skin.

Ion+ Mode

Description: This mode uses positive ions to remove grease and aged cutin from pores.

Steps:

  1. Use a toner to keep your face wet.
  2. Choose "Ion+" mode. Hold the metal ion bar on two sides. Hold the spatula downwards close to the skin with a 45-degree beam angle.
  3. Keep your face moist during the full treatment.
  4. Use frequency: 2 to 3 times per week, 3-5 minutes per time. Positive ions are generated to attract and remove grease and aged cutin from the pores.

Ion- Mode

Description: This mode uses negative ions to permeate nutrients into the deeper layer of the skin.

Steps:

  1. Use essence, lotion, or facial mask.
  2. Choose "Ion-" mode. Hold the metal ion bar on two sides. Hold the spatula upwards close to the skin with a 45-degree beam angle.
  3. Keep your face moist during the full treatment.
  4. Use frequency: 2 to 3 times per week, 3-5 minutes per time. Negative ions are generated to repel among the same ions, allowing nutrients to permeate into the deeper layer of the skin.

Technical parameters:

PDF preview unavailable. Download the PDF instead.

91inJw MmPL WPS 文字