Lockly Guard Wireless Exit Button PGA387 Installation & User Manual

Product Overview

The Lockly Guard Wireless Exit Button (PGA387) utilizes bidirectional RF433.97MHz~443.97MHz technology with Lockly 2.0 proprietary encryption for reliable, stable, and secure communication. It operates with a single AAA alkaline battery, offering up to 12 months of use. A Wireless Transceiver is required for connectivity. This device is designed for quick and easy installation, allowing mounting in various locations.

Installation and Pairing Guide

Press the buckle button to detach the backplate cover.
Insert one AAA alkaline battery, ensuring correct +/- polarity. Important: Do not use expired batteries, as this may cause product malfunction.
Pair the Wireless Exit Button with the Wireless Transceiver. Within three minutes of battery installation, press the button on the exit device to initiate pairing. Refer to the Wireless Transceiver manual for pairing mode instructions. The device attempts pairing for 3 minutes; if unsuccessful, reinsert the battery and press the button again. Up to 10 Wireless Exit Buttons can be added.
Remove the protective adhesive film from the backplate and mount the device in the desired location, typically near the exit door. Screws can also be used for secure mounting.

Regulatory Information

FCC Warning

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: it must not cause harmful interference, and it must accept any interference received, including that which may cause undesired operation. This equipment has been tested and found to comply with Class B digital device limits, designed for reasonable protection against harmful interference in residential installations. If interference occurs, users are encouraged to try measures such as reorienting the antenna, increasing separation, or consulting a technician.

Note: Unauthorized modifications may void the user's authority to operate the equipment.

FCC Radiation Exposure Statement: The Lockly Guard Wireless Exit Button complies with FCC radiation exposure limits for uncontrolled environments. Install and operate with a minimum distance of 20cm between the radiator and your body.

IC Warning (Canada)

This device contains licence-exempt transmitter(s) complying with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: no interference, and acceptance of any interference. The device is designed to not produce interference and to accept any radio interference.

IC Radiation Exposure Statement: This equipment meets the exemption from routine evaluation limits in section 2.5 of RSS-102. Install and operate with a minimum distance of 20cm between the radiator and any part of your body.

California Proposition 65 Warning

This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer. For more information, visit www.P65Warnings.ca.gov.

	Lockly Guard Duo Faceplate - Unified Door Hardware Discover the Lockly Guard Duo Faceplate, an optional accessory designed to enhance the aesthetic of your Lockly Guard Duo, Vision Duo, and Lux Compact smart locks. This faceplate unifies the look of interconnected deadbolts and latches, and can conceal pre-existing door frame holes for a cleaner installation.
	FCC Application and Compliance Statement for Lockly Vision Elite (FCC ID: 2ASIVPGD798NV) This document is an FCC application and compliance statement from PIN GENIE, INC. DBA LOCKLY for the Lockly Vision Elite, FCC ID 2ASIVPGD798NV. It confirms testing compliance with FCC Part 15 rules for Class B digital devices and outlines requirements for the Supplier's Declaration of Conformity (SDoC).
	Lockly Guard Deadbolt User Manual: PGD728F ZU & PGD728 ZU Comprehensive user manual for the Lockly Guard Deadbolt smart lock, covering installation, features like PIN Genie keypad, Z-Wave integration, fingerprint recognition, access codes, and troubleshooting for models PGD728F ZU and PGD728 ZU.
	Lockly Visage PGK728WRHK Smart Lock Installation Guide Step-by-step installation guide for the Lockly Visage smart lock (Model PGK728WRHK), covering hardware setup, battery charging, door preparation, troubleshooting, and parts overview.
	Lockly Vision Smart Lock + Video Doorbell User Manual Comprehensive user manual for the Lockly Vision Deadbolt Edition smart lock and video doorbell, detailing features, setup, operation, and troubleshooting for enhanced home security.
	Lockly Guard Defender Smart Lock User Manual (238LM/238LE) Comprehensive user manual for the Lockly Guard Defender smart lock (models 238LM/238LE), covering installation, setup, features, locking/unlocking methods, troubleshooting, and safety precautions.
	Lockly Guard Deadbolt 728F ZU \| 728 ZU User Manual Comprehensive user manual for the Lockly Guard Deadbolt smart lock, covering features, operation, Z-Wave integration, fingerprint recognition, and troubleshooting for models PGD728F ZU and PGD728 ZU.
	Lockly PIN Genie Pro PGK7SWHK Smart Lock User Manual and Installation Guide Official user manual and installation guide for the Lockly PIN Genie Pro smart lock (model PGK7SWHK). Learn about setup, features, troubleshooting, and smart home integration.

Lockly Guard Wireless Exit Button PGA387