Instruction Manual for LALUZ models including: PDL-001-BK, PDL-001-WH, PDL-001-WH Farmhouse Chandelier, PDL-001-WH, Farmhouse Chandelier, Chandelier
5 days ago — The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be understood that common sense ...
24 часа назад — WARNING (To reduce the risk of fire, electric shock, or injury to persons):. 1. We suggest installation by a licensed electrician.
Item No: PDL-001-BK /PDL-001-WH WARNING (To reduce the risk of fire, electric shock, or injury to persons): 1. We suggest installation by a licensed electrician. 2. Please read the instruction carefully and save it as you may need it at later time. 3. Before you start, NEVER attempt any work without shutting off the electricity until the work is done. A). Go to the main fuse, or circuit breaker, box in your home. Place the main power switch in the "OFF" position. B). Place the wall switch in the "OFF" position. 4. Mounting surface should be clean, dry, flat, strong enough and 1/4" larger than the canopy on all side. Any gaps between the mounting surface and canopy exceeding 3/16" should be corrected as required. 5. Make sure that the ceiling or wall can stand the weight of the lamp before fixture. 6. Make sure the voltage you are using is 120V. The maximum wattage is60W per bulb. 7. Keep the lamp away from acidic and basic objects in case of damaging the surface of the lamp. 8. When replacing bulb, you should turn off or unplug the lamp and you must wait until it is cool as bulbs get hot quickly. 9. The safety instructions appearing in this manual are not meant to cover all possible conditions that may occur. It must be understood that common sense, caution and care must be used with any electrical products. 10. Do not touch the bulb or lamp shade during the lighting fixture working. 11. An individual grounding conductor of a chain-and-canopy suspended luminaire shall be interwoven through the chain from the luminaire to the canopy Image for finished product: Accessories List: Installation Procedures: 1. Open the package and take out all the parts or accessories, then place them on a clean flat place. 2. Please turn off the power first 3. Assemble the light fixture as below procedure: 4. Fix the straight pole 2 to the lamp tube 1Fix the lamp 3 to the straight pole 2 by using the straight pole 4Fix the straight pole 4 to the square canopy 6 with the lock 5 5. Fix the hanging plate 8 to the ceiling with the screw 7and connect the wire on the ceiling with the wire on the lamp by using the wire cap 9 6. Fix the square canopy 6 to the ceiling by using the screw cap 10 7. Fix the glass 11 to the lamp holder by using the lamp holder ring 12Install light source 13 (No Included) on the lamp holder 8. Check everything installed correctly, then you can turn on the light.WPS 文字