Vehicle GPS Tracker (GSM+GPS+SMS)
GT06 User Manual (Version 3.0)
1 SUMMARY
The GT06 is a GSM/GPS tracker designed for cars, motorcycles, scooters, and e-bikes. It features superior receiver sensitivity, fast TTFF (Time To First Fix), and GSM design, enabling continuous position reporting to a backend server. Developed with "openCPU" technology, it offers lower cost, reduced power consumption, and fast response speeds, providing industrial-level performance at an economical price point.
2 Specifications
Item | Description |
---|---|
Dimension | 98*53*13mm |
Power range | 9-95v DC/1.5A |
Working humidity | 5%~95% |
Operating temperature | -30°C~75°C |
Internal backup battery | 180mAh/4.2V |
Weight | 65g |
Network | GSM/GPRS |
GSM frequency | 850/900/1800/1900Mhz |
GPS sensitivity | -159dBm |
GPS accuracy | 5 meters |
GPS Fixed | Cold start: 45s |
Warm start: 35s | |
Hot start: 1s | |
LED indicator | 1: Red for Power 2: Yellow for GSM 3: Blue for GPS |
Input | 1: ACC detect 2: SOS detect 3: Voice monitor |
Output | 1: Immobilizer (stop engine) by relay |
Position report | Time based and angle based |
Alarm alerts | GEO Fence, speed over, power tamper, SOS (Hijack), idle, Vibration alarm |
Configuration | SMS + computer (USB configurator) + server |
OTA | Support |
3 Main functions
- GSM quad-band frequency
- Real time tracking by SMS/GPRS
- Over-speed alarm
- Move alarm
- Geo-fence alarm
- Built-in backup battery for power failure alarm
- Cut vehicle oil or circuit alarm
- ACC ignition and flame out inform
- Vibration alarm
- Voice monitoring
- SOS alarm
- Open the door alarm
- Smart sleep save power Mode
- AGPS function for faster GPS signal reception
- Built-in storage memory
4 Applications
- Motorcycle/Scooters/E-bikes
- Car
- Truck
5 Package Contents and optional Accessories
Package Contents:
- Tracker
- Main wire
Optional accessories:
- Relay
- Microphone
- SOS button
6 Installation
6.1 Installation location
The device front side should face the sky. When installing in a car, if the windscreen is glued with a metal thermal insulation layer or heating layer, it may reduce the GPS signal reception and cause GPS work disorder.
Recommended locations:
- Under front windshield
- Under rear windshield
- Around dashboard
NOTE: device front side towards the sky.
6.2 Device wiring diagram
The wiring diagram illustrates the connections for the tracker, data cable, SOS button, microphone, and relay. The relay is connected to the fuel pump.
Wiring Details:
- Data Cable: Black and Red wires.
- SOS Button: Positive (+) and Negative (-) connections.
- Microphone: Connections shown.
- Relay: Connected to the fuel pump. The relay has terminals 30, 85, 86, and 87a. A 2A fuse is used in the power line.
- Power: Connected via a 2A fuse. Red wire for positive, black wire for negative.
- Ignition/Control: Yellow wire for START (ON), White wire for OFF (Original).
6.3 Indicator description
6.3.1 Red - Power indicator
Status | Meaning |
---|---|
Flash every 2 seconds | Working normal |
Not bright | Power off |
6.3.2 Yellow - GSM indicator
Status | Meaning |
---|---|
Flash every 2 seconds | GSM initialization |
Constantly bright | GPRS online |
Not bright | GSM sleep |
6.3.3 Blue - GPS indicator
Status | Meaning |
---|---|
Flash every 2 seconds | GPS searching |
Constantly bright | GPS fixed |
Not bright | GPS sleep |
6.4 Notices
- GPS tracking requires an outdoor environment with a mobile phone signal and GPS signal. Metal and buildings above the GPS tracker can block the GPS satellite signal.
- Ensure the GSM SIM card (2G GSM network or compatible 2G GSM network) supports making calls, sending messages, and GPRS network.
- Ensure the SIM card has sufficient credit or balance.
- Ensure the GSM card has enabled call display and disabled call transfer. The PIN code should be handled appropriately.
- Do not assemble or disassemble the device without authorization.
SIM Card Types:
- Normal SIM ?
- Micro SIM ❌
- Nano SIM ?
6.5 SMS command
- 6.5.1 Setup IP and port
Format:IP [IP Address] [Port]
Reply:set IP OK
Example:IP 198.11.175.123 9026
- 6.5.2 Modify SMS password
The factory password is:123456
Format:password,password,new password
Reply:password ok
Example:PASSWORD,123456,666888
(new password is 888888) - 6.5.3 Setup APN
Format:apn,password,APN
Reply:apn ok
Example:apn,123456,internet
- 6.5.4 Setup APN user name
Format:apnuser,password,user name
Reply:apnuser ok
Example:apnuser,123456,uiwap
- 6.5.5 Setup APN password
Format:apnpasswd,password, APN password
Reply:apnpasswd ok
Example:apnpasswd,123456,654321
- 6.5.6 Setup admin phone number
Format:101#[phone number]#
Reply:OK
Example:101#+8612345678910#
- 6.5.7 Delete admin phone number
Format:D101#
Reply:OK
- 6.5.8 Setup SOS 1 phone number
Format:102#[phone number]#
Reply:OK
Example:102#+8612345678911#
- 6.5.9 Delete SOS 1 phone number
Format:D102#
Reply:OK
- 6.5.10 Setup SOS 2 phone number
Format:103#[phone number]#
Reply:OK
Example:103#+8612345678912#
- 6.5.11 Delete SOS 2 phone number
Format:D103#
Reply:OK
- 6.5.12 Setup ACC on location update time interval
Format:freq,password,seconds
Reply:OK
Example:freq,123456,20
(update every 20 seconds) - 6.5.13 Setup ACC off location update time interval
Format:static,password,seconds
Reply:OK
Example:static,123456,60
(update every 60 seconds) - 6.5.14 Query google link
Format:G1234
Reply:google link
- 6.5.15 Query device state
Format:CXZT
Reply:Device state
- 6.5.16 Restart device
Format:CQ
Reply:system reset OK!
- 6.5.17 Recover factory setting
Format:FORMAT
Reply:OK
- 6.5.18 Stop Engine
Format:DY
Reply:CUT OIL OK
- 6.5.19 Recover Engine
Format:KY
Reply:RESUNE OIL OK
- 6.5.20 Voice Monitor
SOS numbers can call the device or send SMS to the device for voice monitoring.
Format:88
Reply:No reply
- 6.5.21 Setup sleep mode
When the device sleeps, it will turn off GPS and stay online.
Format:sleep,password,interval
Reply:OK
Example:sleep,123456,10
(means when the asset is static for 10 minutes, it will go to sleep; if the interval is configured as 0, it means no sleep) - 6.5.22 Setup timezone
Format:zone[password] [timezone offset]
Reply:OK
Example:zone123456 e08
(setup timezone to +8)zone123456 w04
(setup timezone to -4)