Large Cantilever Arm FCAM
The robust solution for heavy load pipe support.
Product Overview
The Fischer FCAM series offers large cantilever arms designed for the quick and easy installation of pipelines carrying heavy loads. These arms provide a robust and adaptable solution for various applications, particularly in industrial and infrastructure projects.
Applications
- Quick and easy installation of pipelines with heavy loads, such as along walls.
- Suitable for use in dry interior areas (FCAM standard).
- Suitable for indoor and outdoor applications (FCAM hdg variant).
Advantages
- Robust Construction: Composed of a basic and a support profile, enabling the bearing of heavy loads.
- Adaptable Lengths: A graduated range of lengths allows for ideal adaptation to specific application requirements.
- Easy Alignment: The base plate features long slots, oriented at 90° to each other, facilitating easy arm alignment.
- Secure Hold: Stamped serrations in the channel provide a secure hold for sliding nuts, ensuring stability under high shear loads, such as in vertical installations.
Properties
- Material: Steel S235JR (material no. 1.0037) according to DIN EN 10025.
- Zinc Plating: Electro zinc-plated (FCAM standard) or hot-dip galvanised (FCAM hdg variant).
Technical Data
The FCAM series is available in various lengths and heights.
| Item | Item No. | Length L [mm] | Height H [mm] | Sales Unit [pcs] |
|---|---|---|---|---|
| FCAM 300 | 504477 | 300 | 246 | 1 |
| FCAM 400 | 504479 | 400 | 270 | 1 |
| FCAM 500 | 504480 | 500 | 284 | 1 |
| FCAM 600 | 504482 | 600 | 319 | 1 |
| FCAM 700 | 505460 | 700 | 343 | 1 |
| FCAM 300 hdg | 538018 | 300 | 246 | 1 |
| FCAM 400 hdg | 538019 | 400 | 270 | 1 |
| FCAM 500 hdg | 538020 | 500 | 284 | 1 |
| FCAM 600 hdg | 538021 | 600 | 319 | 1 |
| FCAM 700 hdg | 538022 | 700 | 343 | 1 |
Load Data
The following table details the maximum recommended static loads for the FCAM cantilever arms under different load cases.
| Item | Item No. | Max. Recommended Static Load Case 1 [kN] | Max. Recommended Static Load Case 2 [kN] | Max. Recommended Static Load Case 3 [kN] | Sales Unit [pcs] |
|---|---|---|---|---|---|
| FCAM 300 | 504477 | 7.00 | 3.70 | 7.00 | 1 |
| FCAM 400 | 504479 | 7.50 | 2.80 | 7.50 | 1 |
| FCAM 500 | 504480 | 6.50 | 2.30 | 6.50 | 1 |
| FCAM 600 | 504482 | 6.00 | 1.90 | 6.00 | 1 |
| FCAM 700 | 505460 | 5.50 | 1.30 | 5.50 | 1 |
| FCAM 300 hdg | 538018 | 7.00 | 3.70 | 7.00 | 1 |
| FCAM 400 hdg | 538019 | 7.50 | 2.80 | 7.50 | 1 |
| FCAM 500 hdg | 538020 | 6.50 | 2.30 | 6.50 | 1 |
| FCAM 600 hdg | 538021 | 6.00 | 1.90 | 6.00 | 1 |
| FCAM 700 hdg | 538022 | 5.50 | 1.30 | 5.50 | 1 |
Load Case Descriptions:
- Load Case 1: Represents a single point load 'F' applied at the midpoint (L/2) of the cantilever arm.
- Load Case 2: Represents a single point load 'F' applied at the free end (L) of the cantilever arm.
- Load Case 3: Represents a uniformly distributed load 'F = q x L' applied along the entire length of the cantilever arm.
