Control 414CT MicroPlus
Standard Coverage Series – Compact Two-Way 4” Ceiling Loudspeaker
SPEC SHEET
The image shows the JBL Control 414CT MicroPlus ceiling loudspeaker. One view displays the speaker with its white, round, bezel-less grille attached, while the other view shows the speaker without the grille, revealing the woofer and tweeter drivers.
KEY FEATURES
- Two-way speaker with 103 mm (4 in) woofer and 13 mm (0.5 in) tweeter
- Stylish bezel-less grille blends elegantly into room design.
- Extremely wide 160° coverage
- Wide 69 Hz - 25 kHz Frequency Range
- Included 25W transformers for use with 70V/100V distributed audio systems
HIGHLIGHTS
Part of the Control 400 collection's Standard Coverage Series, the Control 414CT MicroPlus is a two-way ceiling speaker with a 103mm (4 inch) woofer and 13mm (0.5 inch) soft-dome tweeter. The drivers are mounted in a ported baffle, with a pre-attached backcan for quick and easy installation.
The Control 414CT MicroPlus is designed to provide exceptional sound quality for background music and music-plus-paging systems. These speakers are ideally suited for a wide range of low to medium volume applications such as music cafés, business music systems, retail stores, music/paging systems, airports, reception/waiting rooms, lounges, courtrooms, convention centers, hotels, educational facilities, and more.
The 160° coverage is especially wide, delivering consistent sound quality for listeners located both off and on axis.
Wide frequency response and low distortion make the Control 414CT MicroPlus ideal for sound systems requiring a higher fidelity sound. For applications where more bass is desired, the Control 414CT MicroPlus is tuned to pair well with the Enhanced Coverage Series Control 419CS/T subwoofer.
The built-in 25W UL-registered transformer is designed for exceptionally low-saturation, even at high drive levels, providing top quality, low distortion distributed sound character.
The full-face bezel-less grille blends beautifully into room décor, and the magnetic attachment of the grille is supplemented with an easy-to-apply safety tether. The speaker is packaged with grille, integral backcan, C-ring, and tile rails for fast installation. The included white grille is paintable (grille backing is removeable and re-applicable for painting), and optional accessory grilles are available in black (JBL-MTC-414BG) and in square (JBL-MTC-414SG, white only).
The Control 414CT MicroPlus is UL 1480A and UL 2043 listed.
SPECIFICATIONS
SYSTEM | |
---|---|
Frequency Range (-10 dB)¹ | 69 Hz - 25 kHz |
Frequency Response (±3 dB)¹ | 93 Hz - 21 kHz |
Power Capacity (@ 25 W tap)² | 25 W (100 W Peak) Continuous Pink Noise Power (100 hrs) |
Sensitivity³ | 85 dB |
Nominal Coverage Angle³ | 160° conical |
Directivity (Q)³ | 2.9 |
Directivity Index (DI)³ | 4.6 dB |
Rated Maximum SPL @ 1m⁴ | 99 dB continuous pink noise (105 dB peak), 25 W tap |
Transformer Taps | 70 V: 25 W, 12 W & 6 W 100 V: 25 W, 12 W |
Recommended Protective High-Pass Filter Frequency | 70 Hz (24 dB/oct LR) |
Transformer Insertion Loss | 0.6 dB @ 6 W; 0.6 dB @ 12 W; 0.7 dB @ 25 W |
Overload Protection | PTC power limiting to protect transducer from occasional overload. |
Safety Agency Ratings | Suitable for use in air handling spaces per UL 2043, NFPA 90A & NFPA 70. S7232/UL Listing per UL 1480A Speakers for Commercial and Professional Use. Listed per CSA C22.2, no. 205 Signal Equipment. Transformer UL registered. |
Environmental | IP rating: IP32 per EN/IEC 60529. RoHS: Per EU RoHS Directive 2011/65/EU, as amended by EU Delegated Directive (EU) 2015/863. Operating temperature: 0° C to 45 °C. |
TRANSDUCERS | |
---|---|
LF Driver | 103 mm (4 in) with PP cone and paper cup, Polymerized Styrene Butadiene Rubber surround |
HF Driver | 13 mm (0.5 in) voice coil with aluminum bobbin, PEI diaphragm, neodymium magnet |
ENCLOSURE | |
---|---|
Enclosure Material | Backcan: Powder-coated formed steel Baffle: PC/ABS, flammability rated UL 94 5VB |
Grille | Bezel-less, SPCC steel grille with powder-coat finish, flammability-rated backing (removable and re-applicable for painting). Stock grille is white (RAL9003), round. Black (RAL9004) round and white square available as optional accessories. Safety tether with tether stake pre-attached to grille. |
Termination | 4-pin touch-proof screw-down terminals for bare wire. UL and VDE rated. Jumper (installed by default) for use of transformer inputs. Terminal cover hinged with 1 captive screws for attachment (no loose hardware). |
Wire Entrance/Exit Location | Multi-use strain relief (for wires or flex conduit) provided. Optional positioning on either top panel (for easiest installation through ceiling cutout) or side of backcan (for lowest depth profile above ceiling). |
Attachment Fastening | 3 dog-ear attachment tabs for ceiling thicknesses between 1 mm and 40 mm ceiling board thickness. |
Reinforcing Brackets | Zinc-plated C-ring and 2 tile rails included for additional support above ceiling. Additional safety tab on backcan for secondary safety cable. |
Dimensions (H x Dia) | 114 mm (4.6 in) H x 203 mm (8.1 in) dia. 105 mm (4.2 in) from bottom of ceiling tile to top of backcan (with wire exit positioned on side of backcan). |
Ceiling Cutout Size | 168 mm (6.6 in) |
Net Weight (each) | 2.12 kg (4.67 lbs) |
Shipping Weight (pair-packed in carton) | 8.6 kg (18.96 lbs) |
SPECIFICATIONS (Cont.)
ENCLOSURE (Cont.) | |
---|---|
Included Accessories (per speaker) | 1 jumper, 1 cable strain relief, white round bezel-less grille (with pre-attached safety tether and tether clip), cutout template (labeled part of the packaging), C-ring, 2 tile rails (fits both 2 x 4 ft and 600 x 1200 mm tiles), C-ring/tile-rail screws, 1 seal cover. |
Optional Accessories | JBL-MTC-414BG black (RAL9004) round grille, JBL-MTC-414SG white (RAL9003) square grille. JBL-MTC-414WG weather grille. JBL-MTC-424NC new construction bracket. JBL-MTC-424MR mud-ring construction bracket. JBL-MTC-48TRX4 tile rail for 4' x 4' ceiling tiles. |
Colors | Stock grille is white (RAL9003), paintable. |
SKU # | JBL-C414MPT. |
Notes on Specifications:
- ¹ Half-space (mounted in ceiling, 2π, half-space of free-field), with no high-pass filter.
- ² Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously.
- ³ Half-space (mounted in ceiling, 2π, half-space of free-field), average 1 kHz to 6 kHz.
- ⁴ 8Ω mode, calculated from sensitivity and 100 hr power handling, exclusive of power compression.
For additional information, see Control Contractor 410 Micro Series Ceiling Loudspeakers Owner's Manual, C410M_CLGSPKMAN. JBL continuously engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.
FREQUENCY RESPONSE & IMPEDANCE
A graph titled 'FREQUENCY RESPONSE & IMPEDANCE' displays 'Half-space, equivalent 8Ω, on-axis (typical for coverage area)'. The Y-axis is labeled 'SPL (dB)' and ranges from 60 to 100 dB. The X-axis is labeled 'Frequency (Hz)' and uses a logarithmic scale from 20 to 20,000 Hz. Two curves are plotted: a frequency response curve (in dB) showing a wide range from 69 Hz to 25 kHz, and an impedance curve (in Ohms) showing a typical speaker impedance characteristic.
BEAMWIDTH
A graph titled 'BEAMWIDTH' displays '-6 dB coverage by frequency'. The Y-axis is labeled '-6 dB Beamwidth (degrees)' and ranges from 10 to 360 degrees. The X-axis is labeled 'Frequency (Hz)' and uses a logarithmic scale from 20 to 20,000 Hz. Two lines are plotted: 'Horizontal' (blue squares) and 'Vertical' (red squares), both showing coverage angles around 160 degrees at lower frequencies, narrowing to approximately 100 degrees (horizontal) and 90 degrees (vertical) at higher frequencies.
DIMENSIONS
Diagrams illustrating the dimensions of the JBL Control 414CT MicroPlus ceiling loudspeaker. Key dimensions provided in millimeters (and inches): Overall Diameter: 203 mm (8.1 in). Overall Height: 114 mm (4.6 in). Ceiling Cutout Diameter: 164 mm (6.6 in). Depth from ceiling tile to top of backcan: 105 mm (4.2 in).