| 1.0 | 1.1.1 | | Application 7,10,17 and 20 actuators used for changeover are not shown as available for rooms |
| 1.1.2 | | Bug fixes and performance improvements |
| 1.1.3 | | Fixes an issue with the wrong conversion factor of ZigBee signal in the network test. |
| 1.1.4 | | Fixes a bug in some translations and links to Privacy Policy. Adds updated functionality in Demo mode. |
| 1.1.5 | | Implement Czech language; Privacy Policy in Polish fixed; Added Uninstall Repeater functionality |
| 1.1.6 | | Fixed uninstall repeater functionality if there is more than one repeater |
| 1.1.7 | | Updated Privacy Policy URL. Added new image for Wired RT in Configure Room screen. Fixed app does not reconnect to MC after OTA, pairing alert is shown constantly now. |
| 1.1.8 | | Bug fixes. Serial number and HP optimizer status added to handover report. Updated handling of Danfoss Identity Profile logon. |
| 1.1.9 | | Temperature setpoint refresh for room overview. Minor updates to graphical layout. Minor bug fixes and improvements. Update for demo mode. |
| 1.1.10 | | Minor UI related updates. Stability improvements. Improved QR scanner. |
| 1.2 | 1.2.0 | | QR code scanner optimization. Support for 3rd party repeaters. Join repeaters and RTs without QR code. |
| 1.2.1 | | Added Spanish language support. |
| 1.3 | 1.3.0 | | Multi controller system support. Installation steps optimisation. Network test improvements. |
| | | Improvement to flow of adding RTs: if installer leaves Main MC and Bluetooth connection is lost, and he returns within range, then connection will auto-connect. Improvement to commissioning of a new building: clearer description of difference between Single vs Multi MC. |
| 1.3.1 | | Improvements to MMC configuration. Network test improvement. Technical drawings with legends. |
| 1.3.3 | | Change to the format of the installation report which is stored locally on the Main Controller. Bug fix to the network test related to when the installation uses multiple ZigBee repeaters. Various other smaller improvements. Android specifically: Bug fix related to when the user wants to connect a ZigBee Repeater to the Main Controller. |
| 1.3.4 | 2025-06-23 | Improvements to the network test: A progress bar informs about the test status for each device. Possibility to retest a single device by pressing it when the result icon is visible. When all results are green, a new summary page is shown with the overall test result. Test result icons have been updated. Explanation of the Main Controllers Blinking Patterns is now available from the main app page under the (i) button. Included a warning of the importance for specific firmware updates. Included reminder not to restart the main controller during firmware updates. Included new animations to better explain user actions and behavior of the main controller. Bug fixes to avoid situations where a room thermostat is not connected to an output/room. General bug fixes. |
| 1.3.5 | 2025-07-03 | Included animations to the firmware update flow: Transfer of update file, Installation of the new firmware, Controller is restarting. Activate Bluetooth if controller did not do it after firmware update. During Multi MC firmware update, recommend to factory reset controller after the update. When user opens Icon2 App, it will check automatically if there is a new app version available and if so, recommend updating. Various bug fixes. Compatibility for Android 15. |
| 1.3.6 | 2025-08-06 | Stability improvements. New visual presentation of blinking patterns. Updated technical drawings for the applications. If user has a problem adopting secondary MCs, app will suggest "common issues". When network test results were not all green, app will after 2nd test suggest adding ZigBee repeater. Bug fix related to network test result. Visual improvements to menu bar, related to Android 15. (Internal note only!) When a Danfoss employee is logged into the app, it will be possible to see network test results in % also for Repeaters and Secondary Controllers. Latest available public Main controller firmware will be included in the app. New visual presentation of blinking patterns. Updated technical drawings for the applications. If user has a problem adopting secondary MCs, app will suggest "common issues". When network test results were not all green, app will after 2nd test suggest adding ZigBee repeater. On the room overview page, display also secondary MCs under the Repeater section, as they are in fact acting also as repeaters. (Internal note only!) When a Danfoss employee is logged into the app, it will be possible to see network test results in % also for Repeaters and Secondary Controllers. |
