JVC GR-SZ3000 Compact VHS Camcorder Instruction Manual

Instruction Manual for JVC models including: GR-SZ3000 Compact VHS Camcorder, GR-SZ3000, Compact VHS Camcorder, VHS Camcorder, Camcorder

GR-SZ3000EG user manual Instructions www.usersmanualguide.com

GR-SZ3000EG JVC Instructions

GR-SZ3000EG, Instructions, JVC

JVC - www.usersmanualguide.com

GR-SZ3000EG user manual Instructions ...

GR-SZ3000EG user manual Instructions www.usersmanualguide.com

File Info : application/pdf, 51 Pages, 840.71KB

gr-sz3000eg

COMPACT VHS CAMCORDER

GR-SZ3000

ENGLISH

Super VHS
VHS PAL
625

INSTRUCTIONS
Downloaded from: https://www.usersmanualguide.com/

EN LYT0002-0P7A

2 EN
Dear Customer, Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of your new camcorder.
Using This Instruction Manual · All major sections and subsections are listed in the
Table Of Contents ( pg. 3).
· Notes appear after most subsections. Be sure to read these as well.
· Basic and advanced features/operation are separated for easier reference.
It is recommended that you . . . ..... refer to the Index ( pgs. 44 46) and
familiarize yourself with button locations, etc. before use. ..... read thoroughly the Safety Precautions that
follow and cautions ( pgs. 47, 48). They
contain extremely important information regarding the safe use of your new camcorder.
SAFETY
PRECAUTIONS
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTIONS:
To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel.
When you are not using the AC Power Adapter/Battery charger for a long period of time, it is recommended that you disconnect the power cord from AC outlet.

Warning on lithium battery The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, heat above 100°C or incinerate. Replace battery with Panasonic (Matsushita Electric), Sanyo or Maxell CR2025; use of another battery may present a risk of fire or explosion. Dispose of used battery promptly. Keep away from children. Do not disassemble and do not dispose of in
fire.
Crossed Out Dust Bin Mark
The Crossed Out Dust Bin Mark on the battery pack indicates that the product complies with Directives 91/157/EEC and 93/86/ EEC.
Nickel-Cadmium (Ni-Cd) battery pack must be recycled or disposed of properly.
This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for playback with a television of a different standard. However, live recording is possible anywhere. Use the BN-V12U/V22U/V25U battery packs and, to recharge them, the provided multi-voltage AC Power Adapter/ Charger. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)
NOTES:
The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit.
The rating plate (serial number plate) of the AC Power Adapter/Charger is on its bottom.

625

This unit is produced to comply with Standard IEC Publ. 65.
PAL

Cassettes marked "

" and "

" can be

used with this camcorder. However, S-VHS

recordings are possible only with cassettes

marked "

Downloaded from: https://www.usersmanualguide.com/

MAJOR FEATURES
Program Manager ( pg. 14 25)
Programme AE with Special Effects
( pgs. 14, 15)
· Auto Mode Lock · Auto Mode Release · Electronic Fog Filter · ND Effect · Sepia · Twilight · Sports · 1/1000 sec. High Speed Shutter · 1/2000 sec. High Speed Shutter
Picture Stabilizer ( pg. 18) Digital Hyper Zoom ( pg. 12) Digital Fades/Wipes ( pg. 19)
EasyEdit with Random Assemble Editing
( pg. 34 37)
PROVIDED ACCESSORIES

·AC Power Adapter/ Charger AA-V11EG

·Shoulder Strap ·Cable Adapter

·Battery Pack BN-V12U

· Lithium Battery CR2025 x 2

· Cassette Adapter C-P7U

·Remote Control Unit RM-V704U or RM-V700U

· AUDIO/VIDEO (A/V) cable

·DC cord

CONTENTS

3 EN

GETTING STARTED

Power .............................................. 4 Clock (Lithium) Battery Insertion/Removal ... 6 Viewfinder Adjustment .......................... 6 Date/Time Setting ................................ 7 Tape Length Setting ............................... 8 Recording Format Setting ........................ 8 Loading/Unloading A Cassette .................. 9 Grip Adjustment ................................. 10 Shoulder Strap Attachment .................... 10 Tripod Mounting ................................. 10

EDITING PLAYBACK RECORDING

RECORDING

Basic Recording ................................. 11

Basic Features ................................... 12

Advanced Features ............................. 14

PLAYBACK

Basic Connections ............................... 28

Basic Playback .................................. 30

Features .......................................... 31

Using The Cassette Adapter ................... 32

EDITING

Tape Dubbing .................................... 33

Random Assemble Editing [R.A.Edit] ......... 34

USING REMOTE CONTROL

UNIT

Insert Editing .................................... 40

Audio Dubbing ................................... 41

TROUBLESHOOTING

INDEX

Controls .......................................... 44 Connectors ....................................... 45

Indicators ........................................ 45

Other Parts ...................................... 45 Viewfinder ....................................... 46

CAUTIONS

SPECIFICATIONS

· S-VIDEO cable

·Editing cable

Downloaded from: https://www.usersmanualguide.com/

4 EN

CHG. (charge) indicator Marks
POWER indicator

To AC outlet

END indicator

REFRESH switch

REFRESH indicator

Charge marker
** CHARGE MARKER A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colors are provided (red and black)--you choose which one means charged and which means discharged.

GETTING STARTED

Power
This camcorder's 3-way power supply system lets you choose the most appropriate source of power.
NOTES:
No function is available without power supply. Use only specified power supply. Do not use provided power supply units with other
equipment.
CHARGING THE BATTERY PACK
SUPPLY POWER
1 Connect the charger's AC power cord to a wall outlet. The power indicator lights.
ATTACH BATTERY PACK
2 Align the marks and slide the battery pack in the direction of the arrow until it locks in place. The CHG. indicator lights.
DETACH BATTERY PACK
3 When charging is completed, the END indicator lights. Slide the battery pack opposite the direction of the arrow.

BATT. PACK BN-V12U BN-V22U BN-V25U

CHARGE approx. 1 hr. 10 min. approx. 2 hrs. 10 min. approx. 2 hrs. 40 min.

DISCHARGE approx. 3 hrs. 30 min. approx. 7 hrs. approx. 10 hrs.

Hook on.
Push in. BATT. RELEASE
ATTENTION:
Before detaching the power source, make sure that the camcorder's power is turned off. Failure to do so can result in a camcorder malfunction.

USING THE BATTERY PACK
ATTACH BATTERY PACK
1 Hook its top end to the camcorder and push the battery pack in until it locks in place.
DETACH BATTERY PACK
2 Slide BATT. RELEASE and pull out the battery pack.

BATT. PACK BN-V12U BN-V22U BN-V25U

APPROXIMATE RECORDING TIME 50 min. 1 hr. 50 min. 2 hrs. 25 min.

**REFRESH The AC power adapter features a REFRESH function that allows you to fully discharge the battery pack before recharging.
To discharge the battery . . . ..... attach the battery pack to the adapter as shown in the
illustration to the left. Then push REFRESH. The REFRESH indicator lights when discharging starts, and goes out when discharging is complete.

Downloaded from: https://www.usersmanualguide.com/

5 EN
NOTES:
The recording time per charge is affected by such factors as the time spent in Record/Standby mode and the frequency of zooming. It is safer to have spare battery packs.
Charging times noted on page 4 are for fully discharged battey pack, and discharging times are for fully charged battery pack.
Charging and discharging times vary according to the ambient temperature and the status of the battery pack.
Remember to set the charge marker after charging a battery pack or after detaching a discharged one from your camcorder.
Perform the REFRESH function after no less than 5 chargings. High temperatures can damage the battery pack, so use only where good ventilation is available. Don't
allow it to discharge in container, such as a bag. If you stop recharging or discharging part way through, make sure to remove the battery pack before
unplugging the adapter's AC cord. Remove the battery pack from the adapter immediately after discharging. To avoid interference with reception, do not use the AC Power Adapter/Charger near a radio. Make sure you unplug the DC cord before charging or discharging the battery pack. A blinking CHG. indicator means that the battery pack has become hot. Wait until it cools down to
continue. The CHG. indicator may not light properly with a brand new battery pack, or with one that's been stored
for an extended period. In this case, remove and reattach the battery pack and recharge it. The CHG. indicator should light during recharging. If not, contact your nearest JVC dealer.

To DC in jack Core Filter
DC cord

DC OUT terminal

To AC outlet
AC Power Adapter/Charger AA-V11EG
To car's cigarette lighter socket

Car Battery Charger/Adapter BH-V3E (optional)

USING A CAR BATTERY
Use the optional Car Battery Charger/Adapter (connect as shown in the above illustration).
NOTES:
When using the car battery, leave the engine idling.
The optional Car Battery Charger (BH-V3E) can also be used to charge the battery pack.
When using the optional Car Battery Charger, refer to the respective instruction booklet.

USING AC POWER
Use the AC Power Adapter (connect as shown in the above illustration).
NOTES:
The supplied AC Power Adapter/Charger features automatic voltage selection in the AC range from 110 V to 240 V.
When using the provided DC cord, make sure you connect the end of the cable with the core filter to the camcorder. The core filter improves performance of equipment.

Downloaded from: https://www.usersmanualguide.com/

6 EN
A
3 1
2
Set POWER to "CAMERA".

GETTING STARTED (cont.)
Clock (Lithium) Battery Insertion/Removal
This battery is necessary for clock operation and to perform date/time settings.
SWITCH OFF POWER
1 Switch off the unit's power and remove the power supply unit.
OPEN COVER
2 Open the clock battery compartment cover while pressing the release tab.
REMOVE BATTERY (when replacing)
3 Insert a pointed, non-metallic object between the battery and the compartment ( A ) and pull the battery out.
INSERT BATTERY
4 Ensuring the plus (+) side is up, insert a CR2025 lithium battery and push it in.
CLOSE COVER
5 Close the compartment cover until it clicks in place.
NOTE: See "SAFETY PRECAUTIONS" ( pg. 2) for information
on safe handling of lithium batteries.
Viewfinder Adjustment POSITION VIEWFINDER
1 Adjust the viewfinder manually for best viewability (see illustration at left).
SELECT MODE
2 Set the power switch to CAMERA.
ADJUST DIOPTER
3 Turn the diopter adjustment control until the indications in the viewfinder are clearly focused.

Downloaded from: https://www.usersmanualguide.com/

+ PROGRAM AE select dial
NEAR

FAR

Menu Screen

Gain Up Tele Macro Interval Timer Rec Time JLIP ID NO. Tally Set Character Date/Time

NORM OFF OFF OFF 07 ON

END :MENU KEY

Set Time and Date Screen

1.1.00 10:45 Set Cancel

Date Day/Month/Year

Time 24-hour indication

Date/Time Setting

7 EN

SELECT MODE
1 First set the power switch to "CAMERA". Turn the PROGRAM AE select dial to any position except AUTO LOCK.

ACCESS MENU SCREEN
2 Press MENU.

SELECT FUNCTION
3 Press to move the highlight bar down to "Date/ Time", then press NEAR. The Set Date And Time screen appears.

SET DATE/TIME
4 Press FAR or NEAR until the item you want to set begins blinking, then press + or to until the correct setting appears.

·If you decide you want to return the date and time to the previous settings, press FAR or NEAR to move the highlight bar to "Cancel", then press MENU.
·If you're satisfied with the settings, go on to step 5.

START CLOCK OPERATION
5 Once you've set the date and time, press FAR or NEAR until "Set" begins to blink, then press MENU. The Menu screen reappears.

CLOSE MENU
6 Press MENU.

NOTES:
To display the date and time in the viewfinder and on a connected TV, see "Date/Time Character Insert"
( pg. 22).
If, in step 4, you input an invalid date (30. 2, 31. 6, etc.) and perform step 5, "Input Error" appears blinking at the bottom of the screen. Press +, , FAR or NEAR to input the correct number.

Downloaded from: https://www.usersmanualguide.com/

8 EN
30·45·60 tape length select button

S-VHS/VHS recording format select button

GETTING STARTED (cont.)
Tape Length Setting
Set the tape length according to the length of the tape used.
SET TAPE LENGTH
1 Press 30·45·60 until the required indication appears in the veiwfinder. 30 = 30 minutes of recording time, 45 = 45 minutes, and 60 = 60 minutes.
NOTE: The tape remaining time ( pg. 11) displayed in the
viewfinder is correct only if the correct tape length has been selected.

Set POWER to "CAMERA".

Tape length indicator

Recording format indicator
T

Recording Format Setting
When using an S-VHS-C cassette, set to either of the recording formats.
SET RECORDING FORMAT
1 Press S-VHS/VHS button until the required indication appears in the viewfinder. : Super VHS T : Regular VHS
NOTE:
Super VHS recordings cannot be made on VHS-C tapes.

COMPATIBILITY BETWEEN S-VHS AND VHS

Recording

Playback

Blank tape Camcorder Recorded tape Cassette adapter

S-VHS-C cassette

S-VHS recordings

VHS-C cassette

VHS recordings

S-VHS VCR
· The recorded format (S-VHS or VHS) is automatically detected when playlback begins.
Regular VHS VCR
· S-VHS recorded tapes cannot be viewed on regular VHS VCRs.

Playback The pictures recorded with the camcorder can be viewed in playback by directly connecting it to a TV; and can also be played back using a VCR.

Downloaded from: https://www.usersmanualguide.com/

Turn to take up slack.

Erase protection

Gear

Loading/Unloading A Cassette

9 EN

OPEN CASSETTE HOLDER
1 Slide EJECT until the holder opens. Do not use force to open.

INSERT/REMOVE CASSETTE
2 Make sure the label is facing outward.

CLOSE CASSETTE HOLDER
3 Press PUSH and make sure the holder is closed and locked.

NOTES:
A cassette holder can't be opened unless a power supply is attached.
Make sure that the tape is not slack when loading the cassette. If there is any slack, turn the gear on the cassette in the direction of the arrow to take up the slack.
Make sure the Erase Protection tab is in the position that allows recording. If not, slide the tab. Some cassettes have removable tabs. If the tab has been removed, cover the hole with adhesive tape.
The cassette holder can't be opened while the camcorder is in the record mode.

Downloaded from: https://www.usersmanualguide.com/

10 EN

Recording Start/Stop button

3 2

1
2 1

GETTING STARTED (cont.)
Grip Adjustment
EXPAND LOOP
1 Separate the Velcro strip.
INSERT HAND
2 Pass your right hand through the loop and grasp the grip.
ADJUST STRAP LENGTH
3 Adjust so your thumb and fingers can easily operate the Recording Start/Stop button and Power Zoom lever. Refasten the Velcro strip.
Shoulder Strap Attachment ATTACH STRAP
1 Following the illustration at left, thread the strap through the top of the eyelet 1, then fold it back and thread it through the keeper 2, and then through the buckle 3. Repeat the procedure to attach the other end of the strap to the other eyelet, making sure the strap isn't twisted.
ADJUST LENGTH
2 Adjust as shown in the illustration at left 1, then slide both keepers snug against the eyelets to prevent slipping 2.
Tripod Mounting
ALIGN AND TIGHTEN
1 Align the screw and camera direction stud on the tripod with the camera's mounting socket and stud hole. Then tighten the screw.

Downloaded from: https://www.usersmanualguide.com/

RECORDING Basic Recording

Tape remaining time indicator

25min

*- - -min (Now calculating)

60min

59min

Power indicator

3min 2min (Blinking) 1min (Blinking) 0min (Blinking)

EN 11
NOTE:
You should already have performed the procedures listed below. If not, do so before continuing.
Power ( pg. 4) Date/Time Setting ( pg. 7) Tape Length Setting ( pg. 8) Recording Format Setting ( pg. 8) Grip Adjustment ( pg. 10)
LOAD A CASSETTE
1 Slide EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.
ENTER RECORDSTANDBY MODE
2 Slide the LENS COVER open/close switch to open the lens cover, then set the power switch to "CAMERA".

LENS COVER switch

·The power indicator lights and the camcorder enters the RecordStandby Mode.
·The scene you're aimed at appears on the viewfinder screen, with the word "PAUSE" superimposed upon it.

POWER Start/Stop button

START SHOOTING
3 Press the Start/Stop button.
·The tally lamp lights while recording is in progress, and " REC " appears in the viewfinder.

Tally lamp

STOP RECORDING
4 Press the Start/Stop button again to stop recording.

NOTES:

·The camcorder re-enters the Record-Standby mode.

A cassette holder can't be opened unless a power supply is attached. There may be a delay after you slide EJECT until the holder opens. Do not use force. The tape's remaining time is displayed in the viewfinder as shown. The indicated remaining time is approximate. The time required to calculate the remaining tape length, and the accuracy of the calculation, may vary
according to the type of tape used. The tape remaining time displayed in the viewfinder is correct only if the correct tape length has been
selected ( pg. 8).
"TAPE END" appears when the tape reaches its end, and the power goes off automatically if left in this condition for 5 minutes. "TAPE END" also appears when a cassette whose tape is already at its end is loaded.
If the RecordStandby mode continues for 5 minutes without performing Zoom or any other operations, the camcorder's power shuts off automatically. Set the Power switch to "POWER OFF", and then back to "CAMERA" to turn the camcorder on again.
If the Recording Start/Stop button is pressed after the Record-Standby mode has continued for over 5 minutes, recording may not start immediately.
Sometimes even simply ejecting and reloading the tape may cause the tape's present position to change
slightly. If you're recording on a cassette from the middle, use the RETAKE function ( pg. 12) to find the
end of the last recording so you don't erase any of it. The LENS COVER warning blinks for about 10 seconds when the camcorder is turned on, when the cover
is closed.

Downloaded from: https://www.usersmanualguide.com/

12 EN
Zoom-in Zoom-out
Zoom indicator bar Zoom level indicator
RETAKE (R/F) Power zoom lever

RECORDING Basic Features

FEATURE: PURPOSE: OPERATION:
NOTES:
FEATURE: PURPOSE: OPERATION:
NOTE: FEATURE: PURPOSE: OPERATION:
NOTE:

Zooming
To produce the zoom in/out effect, or an instantaneous change in image magnification.
36X Hyper zoom Digital circuitry doubles the maximum 18x magnification offered by optical zoom.
1) To zoom in, slide the Zoom Lever toward "T".
2) To zoom out, slide toward "W".
During Hyper Zoom, the speed increases the further you slide the Zoom Lever.
Focusing may become unstable during Hyper Zoom. In this case, set the zoom while in Record Standby, set manual focus or Focus
Lock ( pg. 16, 17), then zoom in
or out in Record mode. The Zoom Level Indicator (5) only
moves during optical zoom. Once the Zoom Level indicator reaches the top of the zoom indicator bar, all magnification from that point is through digital processing. During digital image processing, the quality of the image may suffer.
Quick Review
To check the end of the last recording.
1) Press " " and release quickly during the RecordStandby mode. ·Tape is rewound for about 2 seconds and played back automatically, then pauses in RecordStandby mode for the next shot.
Distortion may occur at start of playback. This is normal.
Retake
To re-record certain segments.
1) Make sure the camcorder is in the RecordStandby mode.
2) Press either RETAKE button to reach the start point for new recording. Pressing "F" forwards the tape and pressing "R" reverses it.
3) Press Recording Start/Stop to start recording.
Noise may appear during Retake. This is normal.

Downloaded from: https://www.usersmanualguide.com/

Record-Standby Normal

Up Upside down

Record Record-Standby

Record-Standby Down

AUTO P AU SE APS ON

APS ON APS OFF AUTO PAUSE

QUICK REC

EN 13

FEATURE: PURPOSE: OPERATION:
NOTES:
FEATURE: PURPOSE: OPERATION:
NOTES:

Auto Pause System To automatically stop recording when the camcorder is pointed down, preventing accidental recordings of the ground, your feet, etc.
1) Press AUTO PAUSE so that "APS ON" appears in the viewfinder for 2 seconds. When the camcorder is tilted down by a large degree from its horizontal position during recording, the Record-Standby mode is automatically engaged. During this, "AUTO" is displayed above " PAUSE ". · To switch off the Auto Pause System, press AUTO PAUSE again so that "APS OFF" appears in the viewfinder for 2 seconds.
The Auto Pause System is also effective when the camcorder is pointed up, or is positioned upside down.
Auto Pause also works when the camcorder is twisted by a large degree to the left or right.
When you want to shoot in any of the aforementioned positions, be sure to switch off Auto Pause.
Quick Rec
To record a scene for 5 seconds, providing quick scene transitions like those seen in TV programmes.
1) During RecordStandby, press and release QUICK REC. Recording starts, and after 5-second recording is finished, the camcorder reenters the RecordStandby mode automatically. · To continue shooting longer than 5 seconds, press and hold QUICK REC. Recording continues as long as QUICK REC is kept pressed.
The Fade/Wipe ( pg. 19) cannot
be activated by pressing QUICK REC. QUICK REC cannot be used during Animation and Time-Lapse
( pg. 27).

Downloaded from: https://www.usersmanualguide.com/

14 EN

1 second later, the mode is activated.

Sepia

After 1 sec.

Viewfinder

1/1000 1/2

000

LOCK AUTO
+

MROELE

FAR NEAR

ASDEE FG ND

Mark
PROGRAM AE select dial

RECORDING Advanced Features
Programme AE With Special Effects
All you have to do to access any of the variety of shooting effects is to turn the PROGRAM AE select dial.
SELECT MODE
1 Turn the PROGRAM AE select dial until the symbol of the function you want is aligned with the mark.
·The selected mode's name and its indication are displayed in the viewfinder for approx. 1 second. Then the name disappears, and only the indication remains. The mode is activated.
·When Auto Mode Lock or Auto Mode Release mode is selected, only the mode's name is displayed. Then the name disappears and the mode is activated.
NOTES:
Only one effect can be engaged at a time. The screen becomes slightly reddish when the Fade/
Wipe ( pg. 19) is used in the Sepia mode.
The screen becomes slightly dark in the High Speed Shutter mode. Use in well-lighted situations.
In the High Speed Shutter or Sports modes, picture colour may be adversely affected if subject is lit by alternating discharge-type light sources such as flourescent or mercury-vapour lights.

Downloaded from: https://www.usersmanualguide.com/

DIAL

VIEWFINDER

SYMBOL INDICATION

MODE

LOCK

Auto Lock

Auto Mode Lock

Auto Mode Lock Locks the camcorder in Full Auto mode, preventing incorrect operation due to accidental button pressing during shooting. · In this mode the following controls are disabled;
Fade/Wipe, Wide, Title, Display, M.W.B. (Manual White Balance), Manual Focus, Focus Lock, Exposure Control and MENU.

RELEASE Auto Release Auto Mode Release
Auto Mode Release Re-enables the controls that were disabled by Auto Mode Lock.

FG : Fog Electronic Fog Filter

Electronic Fog Filter Makes the picture look misty white, as when an external fog filter is attached to the lens. Softens the image and gives it a "fancy" look.

ND : ND Effect ND Effect

ND Effect A black mist darkens the picture, as when an ND filter is used. Helps to counter the effects of glare on the subject.

DIAL

VIEWFINDER

SYMBOL INDICATION

EN 15
MODE

Twilight Twilight

Twilight Dusk, twilight scenery, fireworks, etc., look more natural and dramatic. The following happens when Twilight mode is selected: ·Auto gain control is turned off. ·White Balance is set to " " (outdoor mode), but
can also be manually changed to another mode
( pg. 23).
·Auto Focus becomes available only in the range of 10 m to infinity. To focus when the subject-tocamera distance is less than 10 m, use manual
focusing ( pg. 17).

Sports

Sports High shutter speed clearly captures fast-moving action.

1/1000

S 1/1000

1/1000 sec. High Speed Shutter

1/2000

S 1/2000

1/2000 sec. High Speed Shutter

High-Speed Shutter (1/1000s., 1/2000s.) Captures faster action than Sports mode.

Sepia

Sepia The scene being shot is recorded in sepia-tinted (reddish-brown) monochrome, giving the effect of
an older movie. Use together with Wide ( pg. 20)
for the authentic look of a classic Hollywood movie.

Downloaded from: https://www.usersmanualguide.com/

16 EN

RECORDING Advanced Features (cont.)
Focusing

Focus detection zone

FAR

NEAR

PROGRAM AE select dial

Auto Focus
The camcorder's Full Range AF system offers continuous shooting ability from close-up to infinity. However, correct focus may not be obtainable in the situations listed below (in these cases use manual focusing):
·When two subjects overlap in the same scene. ·When illumination is low.* ·When the subject has no contrast (difference in
brightness and darkness), such as a flat, one-colour wall, or a clear, blue sky.* ·When a dark object is barely visible in the viewfinder.* ·When the scene contains minute patterns or identical patterns that are regularly repeated. ·When the scene is affected by sunbeams or light reflecting off the surface of a body of water. ·When shooting a scene with a high-contrast background.
* The low-contrast warning " " appears in the viewfinder.
Focus Lock
This feature locks the focus in place, which is especially helpful in the following situations:
·When things pass between your subject and the camcorder. Engage the focus lock function to lock your subject in before recording.
·When you want your subject to be focused, and to appear in a corner of the screen. First, center on the subject and focus using auto focus mode. Then engage the focus lock function and move the camcorder until the subject is where you want it.

SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

LOCK FOCUS
2 Press FAR or NEAR. The focus lock indication " " appears in the viewfinder.

RELEASE FOCUS LOCK
3 Press FAR and NEAR simultaneously. The focus lock indication disappears.

NOTES:
If the lens is smeared or blurred, accurate focusing is not possible. Keep the lens clean, wiping with a piece of soft cloth if it gets dirty. When condensation occurs, wipe with a soft cloth or wait for it to dry naturally.
When shooting a subject close to the lens, zoom-out
first ( pg. 12). If zoomed-in in the auto focus mode,
the camcorder could automatically zoom out depending on the distance between the camcorder and
the subject. *When Tele Macro ( pg. 25) is activated,
the camcorder will not zoom out automatically.

Downloaded from: https://www.usersmanualguide.com/

FAR

NEAR

PROGRAM AE select dial

EN 17

Manual Focus

NOTE:
You should already have made the necessary viewfinder
adjustments ( pg. 6). If you haven't, do so before
continuing.

SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

ADJUST FOCUS

2 To farther subject . . . Press and hold FAR. The Manual Focus indications

" appear and " " blinks.

Go to step 3.

To nearer subject . . .

Press and hold NEAR. The Manual Focus indications

" appear and " " blinks.

Go to step 3.

LOCK FOCUS
3 Release FAR or NEAR. The focus indication is replaced by the focus lock indication " " and the adjusted focus is locked in.

RELEASE MANUAL FOCUS MODE
4 Press FAR and NEAR simultaneously. The Manual Focus mode is immediately released and the focus lock indication disappears.

NOTES:
Be sure to focus the lens in the maximum telephoto position when you use the Manual Focus mode. If you focus in on a certain subject in the wide-angle position, sharply focused images cannot be obtained when zoomed up because the depth-of-field is reduced at longer focal lengths.
When the focus level cannot be adjusted any farther or closer, " " or " " will blink.

Downloaded from: https://www.usersmanualguide.com/

18 EN
P. STABILIZER

RECORDING Advanced Features (cont.)
Picture Stabilizer
This feature compensates for unstable images caused by camera-shake, particularly noticeable at high magnification.
ACTIVATE PICTURE STABILIZER
1 Press P.STABILIZER. " " appears in the viewfinder. ·To switch off the Picture Stabilizer, press P.STABILIZER. The indicator disappears.
NOTES:
Accurate stabilization may not be possible if hand shake is excessive, or under the following conditions: · When shooting subjects with vertical or horizontal stripes · When shooting dark or dim subjects · When shooting subjects with excessive backlighting · When shooting scenes with movement in various directions · When shooting scenes with low-contrast backgrounds
Switch off Picture Stabilizer when recording with the camcorder on a tripod.

+
+02

Exposure level indicator

To brighten the image

+06

Exposure Control
This feature automatically adjusts the iris for the best available picture quality, but you can override and make the adjustment manually.
SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.
BRIGHTEN IMAGE
2 Press + (maximum +06). The Exposure level indicator appears in the viewfinder. OR . . .
DARKEN IMAGE
Press (maximum 06). The Exposure level indicator appears in the viewfinder. When you want to return to the factory setting . . .
RESTORE INITIAL SETTING
3 Press + and simultaneously. The standard setting is immediately restored and the Exposure level indicator disappears.

To darken the image

Downloaded from: https://www.usersmanualguide.com/

[Ex. : Black Fader] FADE IN

FADE OUT

Function indication

Fade/Wipe Mosaic Fader

After 2 sec.

Fade/Wipe

BK Black Fader

Mosaic Fader

Shutter Wipe

Slide Wipe

Off

OFF

(No indication)

SELECT button

SET button
PROGRAM AE select dial
NOTES:
Pressing and holding the Recording Start/ Stop button allows you to record a black blank screen, or a mosaic pattern if Mosaic Fader is selected.
The screen becomes slightly reddish when the Fade/Wipe is used with Sepia
( pg. 15).

EN 19
Fade/Wipe
These effects let you make pro-style scene transitions. Fade- or wipe-in works at recording start, and fade- or wipe-out works at recording end or when you enter RecordStandby mode.
SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.
SELECT FUNCTION
2 Press SELECT repeatedly until " Fade/Wipe" appears.
ENGAGE FADE- OR WIPESTANDBY MODE
3 Press SET to cycle through the modes as shown at left. Once the desired mode appears, it is selected and reserved.
·The selected mode's name and its indication are displayed in the viewfinder for approx. 2 seconds. Then the name disappears, and only the indication remains.
START RECORDING
4 Press Recording Start/Stop to start recording and activate fade- or wipe-in.
OR . . .
END RECORDING
Press Recording Start/Stop to end recording and engage fade- or wipe-out.
TO CANCEL FADE- OR WIPESTANDBY MODE
5 While " Fade/Wipe" is displayed, press SET twice.
·"OFF" is displayed for approx. 2 seconds and the reserved fade or wipe is cancelled.
BK Black Fader
Fades in/out to a black screen.
Mosaic Fader Gradually turns/returns the picture into/from a mosaic pattern.
Shutter Wipe A black screen moves in from the top and bottom, closing over the image like a shutter, or a new image pushes open the black screen vertically from the centre.
Slide Wipe A black screen moves in from the left to gradually cover the image, or a new image moves in from right to left.

Downloaded from: https://www.usersmanualguide.com/

20 EN
Title

RECORDING Advanced Features (cont.)

Wide mode

Wide
This feature allows you to record black bars at the top and bottom of the screen to produce a cinema-like "wide-screen" effect.

SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

SELECT FUNCTION
2 Press SELECT repeatedly until " Wide" appears.
ENGAGE WIDE MODE
3 Press SET.
RESTORE NORMAL SCREEN
4 Press SET again while " Wide" appears.

No indication

Title indication Happy Birthday Happy Holidays Our Family Movie Star Party Time Merry Christmas Wedding Day Congratulations

The characters you have set using Character Generator

SELECT

Instant Titles
The camcorder has eight preset titles in memory. You can superimpose one of them above a previously stored title as shown in the illustration to the left.
DISPLAY
SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.
SELECT FUNCTION
2 Press SELECT repeatedly until " Title" appears. SELECT PRESET TITLE
3 Engage the RecordStandby mode, then press SET to cycle through the preset titles until the desired title is displayed.
NOTES:
To delete the Instant Titles during recording, press SELECT repeatedly until " Title" appears then press SET.
To recall a title, press SET again.

SET PROGRAM AE select dial
Downloaded from: https://www.usersmanualguide.com/

PROGRAM AE select dial

Gain Up Tele Macro Interval Timer Rec Time JLIP ID NO. Tally Set Character Date/Time

NORM OFF OFF OFF 07 ON

END :MENU KEY

SET : MENU KEY

ABCDE FGH I

J KLMNOPQRS

T UVWX Y Z ÄÖÜ

À È Ò : . ,

Ì '

Ñ /

Æ !

Ø ?

Å ¿

0 1 2 3 4 5 6 7 8 9

I LI

End

Clear

SET : MENU KEY

ABCDE FGH I

J KLMNOPQRS

T UVWX Y Z ÄÖÜ

À È Ò : . ,

Ì '

Ñ /

Æ Ø ! ?

Å ¿

0 1 2 3 4 5 6 7 8 9

I L I KE YOU

End

Clear

EN 21
Character Generator
You can enter an original title of up to 18 characters.
ACCESS MENU SCREEN
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK, then press MENU.
ACCESS CHARACTER SET MENU
2 Press + or to move the highlight bar to "Set Character", then press NEAR. The Character Set menu appears.
INPUT CHARACTERS
3 Press +, , FAR or NEAR to make the desired character blink, then press MENU. The selected characters appear at the bottom of the screen. Repeat as many times as desired (max. 18).
·To select the location of the next character, press +, , FAR or NEAR to make the row of squares blink at the bottom of the screen, then press FAR or NEAR to move the blinking cursor underneath the desired location. Press + when you're done, and the blinking cursor returns to the character grid.
END CHARACTER SETTING
4 Press +, , FAR or NEAR to make "End" blink, then press MENU twice to return to the normal screen.
NOTES:
To erase a character you entered mistakenly, make "Clear" blink by pressing +, , FAR or NEAR, then press MENU. All characters are deleted at once. Or, to erase selected characters only, first move the blinking cursor to the character at the bottom row which you want to replace, then press +, FAR or NEAR to highlight " " in the top left corner, and then press MENU.
To display the characters you have set -- "Instant
Titles" ( pg. 20) or "Date/Time/Character Insert" ( pg. 22).
Characters may be set only in the Record-Standby mode.

Downloaded from: https://www.usersmanualguide.com/

22 EN
SELECT
SET PROGRAM AE select dial
Date display Time display Date-off mode (No indication)

RECORDING Advanced Features (cont.)

Date/Time Character Insert
This feature allows you to display date, time and characters in your viewfinder and on a connected color monitor, record them manually or automatically, and even make your own titles.

NOTE:
You should already have performed the Date/Time
Setting procedure ( pg. 7). If you haven't, do so before
continuing.

DISPLAY

SELECT MODE

Disp.

1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

SELECT DISPLAY
2 Press SELECT repeatedly until " Disp. " appears.

Date/Time display
Auto Date Record mode

CHOOSE DISPLAY MODE
3 Press SET while in RecordStandby to cycle through the modes as shown in the illustration at left.

The characters you have set using Character Generator

Date display

Auto Date Record mode

NOTES:
The selected display can be recorded. If you don't want to record the display, select Date-off
mode before shooting. If you want to delete the display during shooting, press
SELECT repeatedly until " Disp. " appears then press SET. To recall the display, press SET again.

25.12.97
Time display
10:45:56
Date/Time display
25.12.97 10:45:56

Auto Date
Auto date record mode
25.12.97
Auto date record executed
Characters
I LIKE YOU Example of stored characters

AUTO DATE RECORD
Your camcorder automatically records the date for about 5 seconds after recording is initiated in the following situations: ·After changing the date. ·After loading a cassette. ·After Auto Date Record mode is selected by pressing
SET. In this mode, the date is replaced after 5 seconds with "Auto Date".
NOTES:
Setting PROGRAM AE to LOCK always engages the Auto Date Record mode, and disables all other modes.
In the Auto Date Record mode, if the date changes while you're shooting, the date indication is recorded for about 5 seconds from that point. It is not recorded during any other recordings made on that day.

Downloaded from: https://www.usersmanualguide.com/

SELECT
SET PROGRAM AE select dial
White balance mode indicator
No indication (Auto)

M.W.B. MWB
MWB

EN 23
Manual White Balance Adjustment (M.W.B.)
This camcorder's Automatic Colour Temperature system senses the colour temperature of the ambient lighting for automatic white balance adjustment. However, precise colour adjustment is not possible under the following conditions: · When an object is in various shades of the same colour. · When a predominantly red or brown object is being shot
outdoors. In these cases, use the camcorder's built-in preset filters for white balance adjustment.
SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.
SELECT FUNCTION
2 Press SELECT reapeatedly until " M.W.B." appears.
SELECT WHITE BALANCE
3 Press SET (Manual White Balance) until the required indication appears in the viewfinder.
"MWB" ..... With a memorized personal White Balance setting (see below)
" " ......... Outdoors on sunny day " "......... Outdoors on cloudy day " " .......... Light source is halogen or tungsten lamp

MWB
MWB sets the colour temperature for the subject's light source so you can shoot with natural colours that are unaffected by surroundings, even when there are multiple subjects with different colour temperatures.

SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.

ADJUST FOCUS
2 Point the camcorder at a white, flat object such as a sheet of white paper, and adjust focus manually ( pg. 17).

ADJUST WHITE BALANCE
3 Press SET until "MWB" appears, then press and hold SET for more than 3 seconds.

NOTES:

· "MWB" blinks in the viewfinder during adjustment, then stops blinking but stays lit when adjustment is complete.

To switch to automatic white balance adjustment, press SET until the indication disappears, or turn the PROGRAM AE select dial to "AUTO LOCK".
Re-adjust the White Balance when the lighting has changed, when the camcorder has been turned off and on again, or when the PROGRAM AE select dial's position has been changed.
It is helpful to connect your camcorder to a colour monitor when adjusting the white balance ("Basic Connections"
pg. 28).
When adjusted by putting coloured paper in front of the subject in step 2 ("ADJUST FOCUS"), this unit makes its colour temperature standard for automatic white balance. So you can enjoy shooting with different colours. For example, when adjusting with red, blue or yellow colours, the image becomes the colour which aproximates to green, orange or purple respectively.

Downloaded from: https://www.usersmanualguide.com/

24 EN
MENU

FAR

NEAR

Gain Up Tele Macro Interval Timer Rec Time JLIP ID NO. Tally Set Character Date/Time

NORM OFF OFF OFF 07 ON

END :MENU KEY

Gain Up Tele Macro Interval Timer Rec Time JLIP ID NO. Tally Set Character Date/Time

OFF ON 1min 1/2s 07 ON

END :MENU KEY

RECORDING Advanced Features (cont.)
Using Menu For Detailed Adjustment
This camcorder is equipped with Program Manager, an easy-to-use, on-screen menu system that simplifies many of the more detailed camcorder settings.
SELECT MODE
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK.
ACCESS MENU SCREEN
2 Press MENU.
SELECT FUNCTION
3 Press + or to place the highlight bar on the desired function.
MAKE SETTING
4 The setting procedure depends on the function you select. If you select Gain Up, Tele Macro, Interval Timer, Rec Time, JLIP ID NO. or Tally. . . . .... press FAR or NEAR to cycle through the choices until the desired setting appears. If you select Set Character or Date/Time, . . . .... press NEAR to access the selection menu for each function (Set Character pg. 21; Date/ Time pg. 7).
CLOSE MENU
5 Press MENU. The normal screen reappears.
NOTE:
The menu is available only in the Record-Standby mode.

PAUSE
If "Gain Up" or "Tele Macro" in the Menu has been changed from the factory settings, this mark appears in the viewfinder.
Downloaded from: https://www.usersmanualguide.com/

MENU
Gain Up
Tele Macro
Interval Timer Rec Time
JLIP ID NO. Tally Set Character Date/Time

EN 25

NORM

To record a subject in a dimly lit environment. When it is more convenient to shoot with a less coarse picture although the subject becomes slightly dark.

OFF

Allows you to shoot dark scenes with no picture brightness

adjustment.

OFF

Usually set to this position.

Usually the distance to a subject where the lens is in focus

depends on the zoom magnification. Unless there is a

distance more than 1m to the subject, the lens is out of focus

at the maximum telephoto setting. When set to "ON", you

can shoot a subject as large as possible at a distance of

approx. 60 cm.

·Depending on the zoom position, the lens may go out of focus.

OFF 15s 30s 1min 5min

This feature allows you to set the parameters for Self-Timer
( pg. 26) and Time-Lapse recording ( pg. 27).

OFF

This feature allows you to set the parameters for Animation

1/4s

and Time-Lapse recording ( pg. 27).

1/2s

This number is necessary when connecting the camcorder to a device such
as a computer using the J terminal (JLIP). ( pg. 45)
The numbers range from 01 to 99. Factory setting is 07.

The tally lamp comes on to signal the start of recording.

OFF

The tally lamp remains off at all times.

Allows you to input characters. ( pg. 21).

Allows you to set the current date and time ( pg. 7).

= Factory setting and when the PROGRAM AE Select Dial is set to AUTO LOCK

NOTE:
During shooting in low light, Auto Focus accuracy may decrease even when Gain Up is used. In this case,
use Manual Focus ( pg. 17).

Downloaded from: https://www.usersmanualguide.com/

26 EN
Interval Timer indicator Rec Time indicator
+
FAR

1min 1/2s
MENU NEAR

Tally lamp

Gain Up Tele Macro Interval Timer Rec Time JLIP ID NO. Tally Set Character Date/Time

NORM OFF OFF OFF 07 ON

END :MENU KEY

5s 1s 1/2s 1/4s OFF

RECORDING Advanced Features (cont.)
Self-Timer
You can set the delay between pressing Recording Start/ Stop and the actual start of recording. If you secure the camcorder, you (or whomever is operating the camcorder) can enter the scene before recording starts.
NOTE:
Make sure the camcorder is in the Record-Standby mode before performing the following steps.
ACCESS MENU SCREEN
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK, then press MENU.
SET INTERVAL TIME
2 Press or + to move the highlight bar down to "Interval Timer", then press FAR or NEAR to cycle through the choices. Stop when the desired time appears. Choose from "15s", "30s", "1min", "5min", or select to turn the function "OFF".
CLOSE MENU
3 Press MENU.
START DELAYED RECORDING
4 Press Recording Start/Stop. The tally lamp begins blinking, and the blinking frequency increases about 5 seconds before recording is to start. Once recording begins, the lamp stops blinking but stays lit.
To Release Self-Timer . . .
..... while the tally lamp is blinking, press Recording Start/Stop to stop the blinking, then set "Interval Timer" to "OFF".

5min 1min 30s 15s OFF

Downloaded from: https://www.usersmanualguide.com/

Animation
Give stationary scenes or objects an illusion of movement. This function allows you to shoot a series of pictures, each slightly different, of the same object for a brief period of time.
NOTE:
Make sure the camcorder is in the Record-Standby mode before performing the following steps.
ACCESS MENU SCREEN
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK, then press MENU.
SET RECORDING TIME
2 Press or + to move the highlight bar down to "Rec Time", then press FAR or NEAR to cycle through the choices. Stop when the desired time appears. Choose from "1/4s", "1/2s", "1s", "5s", or select to turn the function "OFF". Then press MENU to close Menu screen.
START RECORDING
3 Press the Recording Start/Stop button after focusing on the subject. The recording stops automatically after the selected period of time.
ASSEMBLE SERIES OF PICTURES
4 Repeat step 3 for the desired number of pictures.
RELEASE ANIMATION MODE
5 Set "Rec Time" in the Menu screen to "OFF".
NOTES:
For best results, make sure the camcorder is secured when shooting in Animation or Time-Lapse mode.
Fade/Wipe-in/out cannot be performed during Animation or Time-Lapse shooting.
Before performing other operations following Animation or Time-Lapse recording, make sure the Animation or Time-Lapse mode is deactivated.

Time-Lapse

EN 27

You can record sequentially at preset time spans. Leaving the camcorder aimed at a specific subject, you can record subtle changes over an extended period of time.

NOTE:
Make sure the camcorder is in the Record-Standby mode before performing the following steps.

ACCESS MENU SCREEN
1 Turn the PROGRAM AE select dial to any position except AUTO LOCK, then press MENU.

SET INTERVAL BETWEEN RECORDINGS
2 Press or + to move the highlight bar down to "Interval Timer", then press FAR or NEAR to cycle through the choices. Stop when the desired time appears. Choose from "15s", "30s", "1min", "5min", or select to turn the function "OFF".

SET RECORDING TIME
3 Press or + to move the highlight bar down to "Rec Time", then press FAR or NEAR to cycle through the choices. Stop when the desired time appears. Choose from "1/4s", "1/2s", "1s", "5s", or select to turn the function "OFF". Then press MENU to close Menu screen.

START TIME-LAPSE RECORDING
4 Press the Recording Start/Stop button. Recording and intervals alternate
automatically.

RELEASE TIME-LAPSE MODE
5 To release when the tally lamp is not blinking, set "Rec Time" and "Interval Timer" in the Menu screen to "OFF". To release when the tally lamp is blinking, press the Recording Start/Stop button to stop the blinking, then set "Interval Timer" and "Rec Time" in the Menu screen to "OFF".

Downloaded from: https://www.usersmanualguide.com/

28 EN

PLAYBACK Basic Connections

These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.

A. Connection To a TV or VCR equipped with a SCART connector compatible only with regular video signal

jack cover*

White to AUDIO Yellow to VIDEO

A/V cable (provided)

Cable Adapter (provided)

White to AUDIO (L/MONO)

TV To TV or VCR

VCR Yellow to VIDEO
Set to CVBS

B. Connection To a TV or VCR equipped with a SCART connector compatible with Y/C signal
Cable Adapter (provided)

Yellow: not connect

A/V cable

Yellow: not connect To

(provided)

TV or VCR

jack cover*

White to AUDIO

White to AUDIO (L/MONO)

VCR

To S VIDEO OUT

S-VIDEO cable (provided)

To S -IN Set to Y/C

C. Connection To a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors

jack cover*

White to AUDIO

A/V cable (provided)

To TV or VCR

White to AUDIO in

Yellow to VIDEO (When the S-VIDEO cable is not used.) Yellow to VIDEO in VCR

To S VIDEO OUT

S-VIDEO cable (provided)

To S-VIDEO IN

*jack cover: When connecting the cables, open the jack cover.
Downloaded from: https://www.usersmanualguide.com/

A: Connection to a TV or VCR equipped with a SCART connector compatible only with regular video signals
NOTE:
Use the provided A/V cable and cable adapter.
CONNECT CAMCORDER TO TV/VCR
1 As shown in the illustration at left, connect the A/V cable to the AUDIO and VIDEO connectors on the camcorder and to those on the cable adapter, and then connect the cable adpter to the SCART connector on the VCR or TV.
SET "Y/C"/"CVBS" SWITCH
2 Set the "Y/C"/"CVBS" video out select switch on the cable adapter to "CVBS".
SUPPLY POWER
3 Turn on the camcorder, VCR and TV.
SELECT MODE
4 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

EN 29
C: Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors
NOTE:
Use the provided A/V cable and S-VIDEO cable.
CONNECT CAMCORDER TO TV/VCR
1 As shown in the illustration at left, connect the S-VIDEO cable and/or the A/V cable to the SVIDEO (or the VIDEO) and AUDIO connectors on the camcorder and to those on the VCR or TV.
SUPPLY POWER
2 Turn on the camcorder, VCR and TV.
SELECT MODE
3 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.
D: Connection to a TV with NO A/V Input Connectors (Playback ONLY)

B: Connection to a TV or VCR equipped with a SCART connector compatible with Y/C signals
NOTE:
Use the Provided S-VIDEO cable, A/V cable and cable adapter.
CONNECT CAMCORDER TO TV/VCR
1 As shown in the illustration at left, connect the S-VIDEO cable and the A/V cable to the SVIDEO and AUDIO connectors on the camcorder and to those on the cable adapter, and then connect the cable adapter to the SCART connector on the VCR or TV.
SET "Y/C"/"CVBS" SWITCH
2 Set the "Y/C"/"CVBS" video out select switch on the cable adapter to "Y/C".
SUPPLY POWER
3 Turn on the camcorder, VCR and TV.
SELECT MODE
4 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

NOTE:
Use the optional RF-V5E RF unit. Connect it to the camcorder's VIDEO, AUDIO and RF DC OUT connectors.
* Refer to the RF-V5E instruction manual for the connection procedure.
NOTES:
It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack.
To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder's Power switch to "CAMERA", then set your TV to the appropriate input mode.
If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

Downloaded from: https://www.usersmanualguide.com/

30 EN
STOP

PLAY/PAUSE REW FF

PLAYBACK Basic Playback
NOTE:
Make sure you connect your camcorder as directed in
"Basic Connections" ( pg. 28).
LOAD A CASSETTE
1 Slide EJECT to open the cassette holder, then insert the cassette with the label facing out. Press PUSH to ensure the holder is closed and locked.
SELECT MODE
2 Set the Power switch to "PLAY". The Power On indicator lights.
PLAYBACK
3 Press PLAY/PAUSE. The playback picture appears in the viewfinder and the connected TV.
STOP PLAYBACK
4 Press STOP.

POWER

Recording format indicator : S-VHS
No indication: regular VHS

M-0:23:45
Tape counter

Tape running indicator 4 : Playback 3 : Fast-Forward/
Forward Search 2 : Rewind/Reverse
Search 6 : Still Playback

Rewind or Fast-forward the tape
Press REW to rewind, or FF to fast-forward the tape during Stop mode.
NOTE:
The camcorder shuts off automatically after about 5 minutes in Stop mode or Still Playback mode. To turn on again, set the Power switch to "POWER OFF", then to "PLAY".

Downloaded from: https://www.usersmanualguide.com/

PLAYBACK Features
+

COUNTER R/M PLAY/PAUSE STOP
REW FF

EN 31

FEATURE: PURPOSE: OPERATION: NOTES:
FEATURE: PURPOSE: OPERATION:
NOTE: FEATURE: PURPOSE: OPERATION:
NOTE: FEATURE: PURPOSE: OPERATION:
NOTES:

Manual Tracking
To eliminate noise bars that appear on the screen during playback.
1) Press either +/ button as many times as necessary for best picture.
To reset TRACKING to the original preset, press both + and buttons simultaneously.
Manual Tracking may not work with tapes recorded on other VCRs or camcorders.
Still Playback
To pause during playback.
1) Press PLAY/PAUSE during playback.
2) To resume normal playback, press PLAY/PAUSE again.
Noise bars appear and pictures may become monochrome during Still Playback. This is normal.
Shuttle Search
To allow high-speed search in either direction.
Forward Search 1) Press FF during playback. Reverse Search 1) Press REW during playback.
Noise bars appear and pictures may become monochrome or darken in Shuttle Search. This is normal.
Counter Memory Function
To make it easier to locate a specific tape segment. 1) Press COUNTER R/M and hold for
more than 2 seconds. The counter resets to "0:00:00". 2) Press COUNTER R/M. "M" appears. 3) After recording or playback, press STOP, then REW. The tape automatically stops at or close to 0:00:00. 4) Press PLAY/PAUSE to start playback.
The counter memory functions in the FF and REW modes.
To disable Counter Memory Function, press COUNTER R/M so the "M" disappears.

Downloaded from: https://www.usersmanualguide.com/

32 EN

PLAYBACK Using The Cassette Adapter
Cassette Adapter

Use this to play back a S-VHS-C/VHS-C video cassette recorded with this camcorder. It is fully compatible with any S-VHS/VHS video cassette recorder. The C-P7U adapter is battery powered and automatically performs tape loading and unloading.

+
VCR

INSERT BATTERY
1 Slide the battery cover up to remove it, and install one "R6(AA)" size battery as shown in the illustration at left. Then reattach the cover.
INSERT CASSETTE IN ADAPTER

Compartment door

2 Slide the latch to open the adapter compartment door, then insert the cassette and close the compartment door.

PLAY BACK ON CONNECTED VCR
3 Load the cassette adapter into the VCR and play the tape back as you would any other.

Compact video cassette

Sliding latch

Reels

Recording safety hole

REMOVE CASSETTE FROM ADAPTER
4 Slide the latch and the compartment door opens automatically. Then insert your finger in the hole on the underside of the adapter as shown in the illustration at left, push up and remove the cassette.
NOTES:
During tape loading and unloading, do not touch the reels for safety and tape protection.
Tapes recorded in S-VHS cannot be played back on regular VHS VCRs.
During special-effect playback (slow motion, still frame, etc.), the picture may vibrate or noise bars may appear on the screen.
To record on a VCR using a compact cassette and the adapter, cover the adapter's recording safety hole with adhesive tape.

Downloaded from: https://www.usersmanualguide.com/

EDITING
PLAY/PAUSE Power switch

To AUDIO and VIDEO connectors

To S -VIDEO connector

A/V cable (provided)
To AUDIO (L/MONO), VIDEO and S -IN connectors
If your VCR has the SCART connector, use the provided cable adapter.

S-VIDEO cable (provided)
"Y/C"/"CVBS" video out select switch

VCR (Recording deck)

Tape Dubbing

EN 33

CONNECT EQUIPMENT
1 Following the illustration at left, connect the camcorder and the VCR. (refer also to page 28 and 29)

PREPARE FOR DUBBING
2 Set the camcorder's Power switch to "PLAY", turn on the VCR's power, and insert the appropriate cassettes in the camcorder and the VCR.

SELECT VCR MODE
3 Engage the VCR's AUX and Record-Pause modes.

FIND EDIT-IN POINT
4 Engage the camcorder's Play mode to find a spot just before the edit-in point. Once it's reached, press PAUSE on the camcorder.

START EDITING
5 Press PLAY on the camcorder and engage the VCR's Record mode.

STOP EDITING TEMPORARILY
6 Engage the VCR's Record-Pause mode and press PAUSE on the camcorder.

EDIT MORE SEGMENTS
7 Repeat steps 4 through 6 for additional editing, then stop the VCR and camcorder when finished.

NOTES:
If your VCR has an S-VIDEO input connector or a SCART connector compatible with Y/C signals, connect the camcorder and the VCR using the provided SVIDEO cable. This can improve the dubbed picture quality.
If you use the provided cable adapter, set the "Y/C"/ "CVBS" video out select switch as required. Y/C : When connecting to a VCR which accepts Y/C signals and uses an S-VIDEO cable. CVBS : When connecting to a VCR which does not accept Y/C signals and uses an audio/video cable.

Downloaded from: https://www.usersmanualguide.com/

34 EN

123 456 7890

MBR SET VCR CTL

RM-V704U or RM-V700U (provided)

VCR CODE LIST

VCR BRAND BUTTONS

NAME

(A) (B)

AKAI

6 2
6 4
7 7

BLAUPUNKT FERGUSON

1 3
9 7
9 8
3 2

GRUNDIG

1 4
3 4

HITACHI

6 6
6 3

JVC A B C

9 1
9 6
9 3

MITSUBISHI NEC PANASONIC

6 7
6 8
3 7
3 8
1 3
1 7
1 1
9 4
1 8

VCR BRAND BUTTONS

NAME

(A) (B)

PHILIPS

1 9
9 5
1 1
9 4
9 1
9 6
1 2
3 3

SANYO

3 6
3 5

SELECO, REX 9 1
9 6

SHARP

1 5
1 `

SONY

6 5

6 `

3 3

9
1

THOMSON, TELEFUNKEN, SABA, NORDMENDE

9 1
9 6
9 7
3 2

TOSHIBA

6 9
6 1

EDITING (cont.)
Random Assemble Editing [R.A. Edit]
Create edited videos easily using your camcorder as the source player. You can select up to 8 "cuts" for automatic editing, in any order you like. R.A. Edit is more easily performed when the MBR (Multi-Brand Remote RMV704U or RM-V700U) is set to operate with your brand of VCR (see VCR CODE LIST), but can also be performed by operating the VCR manually.
SET REMOTE/VCR CODE
SET REMOTE TO OPERATE VCR
1 Turn off the power to the VCR and point the remote toward the VCR's infrared sensor. Then, referring to the VCR CODE LIST on the left, press and hold MBR SET, and press button (A) and then (B).
·The code is automatically set once you release the MBR SET button, and the VCR's power comes on.
OPERATE THE VCR
2 Make sure the VCR's power is on. Then, while holding VCR CTL, press the button on the remote for the desired function. The functions the remote can control are PLAY, STOP, PAUSE, FF, REW and VCR REC STBY (you don't need to press VCR CTL for this one).
You're now ready to try Random Assemble Editing.
IMPORTANT
Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.
NOTES:
If the VCR's power doesn't come on in step 1, try another code from the VCR CODE LIST.
Some brands of VCR don't come on automatically. In this case, turn the power on manually and try step 2.
If the RM-V704U/V700U is not able to control the VCR, use the controls on the VCR.

Downloaded from: https://www.usersmanualguide.com/

To AUDIO and VIDEO connectors

Open the cover
To J terminal (JLIP)
To S -VIDEO connector

A/V cable (provided)

S-VIDEO cable (provided)

To AUDIO (L/MONO), VIDEO and S -IN connectors
If your VCR has the SCART connector, use the provided cable adapter.
VCR (Recording deck)

Editing cable (provided)
"Y/C"/"CVBS" video out select switch
A To Remote B PAUSE

C To Pause-In

MAKE CONNECTIONS

EN 35

CONNECT TO . . .
1 A JVC VCR EQUIPPED WITH REMOTE PAUSE TERMINAL Connect the editing cable to the Remote PAUSE terminal.
B JVC VCR NOT EQUIPPED WITH REMOTE PAUSE TERMINAL. Connect the editing cable to the R.A. EDIT connector.
C NON-JVC VCR WITH NEITHER Connect the editing cable to the RM-V704U/ V700U's Pause-In jack.

PREPARE CAMCORDER
2 Insert a recorded tape and set the Power switch to "PLAY".

PREPARE VCR
3 Turn the power on, insert a recordable tape and engage the AUX mode (refer to VCR's instructions).

NOTES:
If your VCR has an S-VIDEO input connector or a
SCART connector compatible with Y/C signals, connect the camcorder and the VCR using the provided S-VIDEO cable. This can improve the dubbed picture quality. If you use the provided cable adapter, set the "Y/C"/ "CVBS" video out select switch as required. Y/C : When connecting to a VCR which accepts Y/C
signals and uses an S-VIDEO cable. CVBS : When connecting to a VCR which does not
accept Y/C signals and uses an audio/video cable.

RM-V704U or RM-V700U (provided)

Downloaded from: https://www.usersmanualguide.com/

36 EN
REW/FF STOP CANCEL

IN/OUT R.A. EDIT PLAY/PAUSE

RM-V704U or RM-V700U (provided)
REW FF PLAY
ON/OFF
VCR REC STBY CANCEL IN/OUT

IN 1 0:00:25 2 3 4 5 6 7 8 COUNTER TOTAL

OUT --:--:--
0:00:25 0:00:00

IN 1 0:00:25 2 0:03:18 3 0:02:33 4 0:04:11 5 6 7 8 COUNTER TOTAL

OUT 0:01:05 0:03:31 0:02:53 --:--:--
0:04:11 0:01:13

EDITING (cont.)
SELECT SCENES
ACCESS R.A. EDIT COUNTER DISPLAY
1 Press PLAY/PAUSE, then press R.A. EDIT and the counter display appears in the viewfinder and the screen of the connected TV.
REGISTER BEGINNING OF SCENE
2 Press REW or FF to locate the beginning of the scene you want, then press IN/OUT to register that point. The data appears under IN on the display.
REGISTER END OF SCENE
3 Press REW or FF to locate the end of the scene and press IN/OUT to register it. The data appears under OUT on the display. The total time of the registered scene(s) is displayed at the bottom of the screen.
REGISTER ADDITIONAL SCENES
4 Repeat steps 2 and 3 for each additional scene (as many as 8).
MAKE CORRECTIONS
5 Press CANCEL during steps 2 and 3 to erase the most recently registered point.
NOTES:
The RM-V704U/V700U can be used to operate other camcorder functions as well. Point the RM-V704U/ V700U at the camcorder's remote sensor and press any of the following buttons (function appears in parentheses): -- ON/OFF (camcorder R.A. EDIT) -- IN/OUT (camcorder IN/OUT) -- CANCEL (camcorder CANCEL)
There must be at least one second between an in-point and its corresponding out-point.
To ensure correct operation, leave at least 15 seconds open between scenes.
Blank portions of tape cannot be registered as in-points or out-points.
If it takes more than 5 minutes to search for an in-point, the VCR's Record-Pause mode is cancelled and editing doesn't take place.
Pressing R.A. EDIT clears all in- and out-points from memory.
Leave a small margin for error around each in-point to ensure the scene is recorded in its entirety.

Downloaded from: https://www.usersmanualguide.com/

ORIGINAL TAPE (camcorder)

IN OUT IN OUT IN

EDITED TAPE (VCR) STOP EDIT

OUT

AUTOMATIC EDITING TO VCR

EN 37

ENGAGE VCR'S RECORDPAUSE MODE
1 Point the remote control toward the VCR's infrared sensor and press VCR REC STBY, or manually engage the VCR's Record-Pause mode.

BEGIN AUTOMATIC EDITING
2 Press EDIT on the camcorder, and the previously selected scenes are copied to the VCR in the
specified order.

END AUTOMATIC EDITING
3 When all selected scenes have been copied, the camcorder and VCR enter the still or pause mode.
Press STOP on both units.

·When finished editing, be sure to disconnect the editing cable and the audio/video cable.

NOTES:
If you performed step 1 C on page 35 ("MAKE CONNECTIONS"), keep the remote control pointed at the VCR during editing.
The on-screen display only appears while the camcorder searches for each scene.
There may be noise at in- or out-points on the edited tape with certain VCRs.

SUPPLEMENTAL INFORMATION ON THE REMOTE CONTROL

Player (JVC VCR) AV OUT

To R.A. EDIT

Editing cable (provided)

To PAUSE IN

AV IN Recording deck

RM-V704U or RM-V700U (provided)

Using the RM-V704U/V700U, it is also possible to perform deck-to-deck Random Assemble Editing. The playback deck must be an R.A. Edit-capable JVC VCR. The recording deck can be... a VCR other than JVC, or a JVC VCR which has neither a Remote PAUSE nor an
R.A. EDIT connector
How to use:
-- Connect the playback deck and RM-V704U/V700U as shown on the left.
-- Set the RM-V704U/V700U to correspond to the brand
of the recording deck. ( pg. 34)
-- For Random Assemble Editing procedure, please refer to the instruction manual of the JVC VCR you are using as the playback deck.
Notes:
RM-V704U/V700U cannot be used to control the playback deck. RM-V704U/V700U is capable of controling basic operations of
the recording deck. While pressing VCR CTL, press PLAY, STOP, PAUSE, FF or REW for these functions. (Not possible with some brands and models). Other buttons cannot be used. To put the recording deck in the Record-Pause mode, use the controls on the recording deck itself.

Downloaded from: https://www.usersmanualguide.com/

38 EN

USING REMOTE CONTROL UNIT
The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (PLAY, STOP, PAUSE, FF, and REW) of your VCR. This remote control unit makes additional recording functions possible.

Lock hole
1
3 4 5 6 7 8 9

Release tab
2
0 ! @ # $ % ^ &

Installing The Battery
PULL OUT BATTERY HOLDER
1 Pull out the battery holder according to the type of remote control unit you have.
Type A : Pull out the battrery holder while sliding the lock hole.
Type B : Pinch the release tab and pull out the battery holder.
INSERT BATTERY
2 Making sure the plus (+) side is up, insert the lithium battery (CR2025)* into the battery holder.
REPLACE BATTERY HOLDER
3 Insert the battery holder into the remote control unit, and push the holder until it clicks into place. * Read the caution concerning lithium batteries ( pg. 2).

RM-V704U or RM-V700U (provided)

BUTTONS
1 PAUSE IN Connector 2 Infrared beam
transmitting window 3 MBR SET Button 4 INT. TIME Button 5 REC TIME Button 6 FF Button 7 REW Button 8 PAUSE Button 9 PLAY Button 0 START/STOP Button ! VISS Button @ ZOOM (T/W) Buttons # VCR CTL Button $ A.DUB Button % STOP Button ^ INSERT Button & R.A.EDIT Buttons

FUNCTIONS

With the camcorder's power switch set to With the camcorder's power switch set to

"CAMERA".

"PLAY".

pg. 35

Transmits the beam signal.

pg. 34

Self-Timer/Time-Lapse ( pg. 39)

Animation/Time-Lapse ( pg. 39)

Retake (forward) ( pg. 12)

FF/FF Shuttle Search ( pg. 30)

Retake (rewind)/Quick Review ( pg. 12) Rew/Rew Shuttle Search ( pg. 30)

Pause ( pg. 31)

Playback start ( pg. 30)

Functions same as the Recording Start/Stop button on the camcorder.

Index Code marking ( pg. 39)

Zoom in and out ( pg. 12)

pg. 34

Audio dubbing ( pg. 41)

Stop ( pg. 30)

Insert Editing ( pg. 40)

pg. 36

Downloaded from: https://www.usersmanualguide.com/

Transmitted beam effective area
15° 5m
30° 15° 30°

Remote sensor

When using the remote control, be sure to point it at the remote sensor. The above illustration shows the approximate transmitted beam effective area for indoor use. The transmitted beam may not be effective or may cause incorrect operation outdoors or when the remote sensor is directly exposed to sunlight or powerful lighting.

Interval Timer Indicator

Viewfinder

1min 1/2s

INDEX

Index Code Marking

Rec Time Indicator

START/STOP VISS INT. TIME REC TIME
RM-V704U or RM-V700U (provided)

EN 39

FEATURE: PURPOSE: OPERATION:
NOTE:

Self-Timer, Animation and Time-Lapse
The remote control lets you set/release Interval Timer and Rec Time functions as well as the Menu screen.
Self-Timer
1) Set Instead of performing steps 1 through 3 on pg. 26 ("Self-Timer"), press INT. TIME on the remote control. Each time INT. TIME is pressed, the Interval Timer indicator appears, changing in the following order: 15s, 30s, 1min, 5min and No indication (off).
2) Release Instead of setting "Interval Timer" to "OFF" in the Menu, press INT. TIME on the remote control until the Interval Timer indicator disappears.
Animation
1) Set Instead of performing steps 1 and 2 on pg. 27 ("Animation"), press REC TIME on the remote control. Each time REC TIME is pressed, the Rec Time indicator appears, changing in the following order: 1/4s, 1/2s, 1s, 5s and No indication (off).
2) Release Instead of using the Menu in step 5 on pg. 27, press REC TIME on the remote control until the Rec Time indicator disappears.
Time-Lapse
1) Set Instead of performing steps 1 through 3 on pg. 27 ("Time-Lapse"), press INT. TIME and REC TIME on the remote control. Each time INT. TIME is pressed, the Interval Timer indicator appears, changing in the following order: 15s, 30s, 1min, 5min and No indication (off). Each time REC TIME is pressed, the Rec Time indicator appears, changing in the following order: 1/4s, 1/2s, 1s, 5s and No indication (off).
2) Release Instead of using the Menu in step 5 on pg. 27, press INT. TIME and REC TIME on the remote control until the indicators disappear.
Also refer to pgs. 26 and 27.

FEATURE: PURPOSE: OPERATION:
NOTE:

Index Code Marking
To give you automatic access to any selected point on a recording.
1) Press VISS once to place the index code. "INDEX" blinks in the viewfinder during marking.
If VISS is pressed during RecordStandby mode, the mark is placed where Recording Start/Stop is pressed.

Downloaded from: https://www.usersmanualguide.com/

40 EN
COUNTER R/M

USING REMOTE CONTROL UNIT (cont.)
Insert Editing
You can record a new scene into a previously recorded tape, replacing a section of the original recording with minimal picture distortion at the in- and out-points. The original audio remains unchanged.

NOTE:
Use the RM-V704U or RM-V700U remote control unit to perform this procedure.

SELECT MODE
1 Set the Power switch to "PLAY".
FIND EDIT-OUT POINT
2 Play back the tape, locate the point and press PAUSE on the camcorder or the remote control.

POWER

M-0:23:45
Viewfinder

Tape counter Insert editing indicator

RESET COUNTER
3 Press and hold COUNTER R/M for more than 2 seconds to reset the tape counter, then press for less than 1 second and make sure "M" appears in the viewfinder.
FIND EDIT-IN POINT
4 Press REW to go a little beyond the beginning of the scene you want to replace, press PLAY to view the recorded tape, and press PAUSE at exactly at the point where the new scene should start.

ENGAGE INSERT EDITING MODE
5 Press and hold INSERT, and without releasing INSERT, press and release PAUSE. The Insert mode is engaged. When the scene the camcorder is aimed at appears on the screen, go to the next step.

BEGIN INSERT EDITING
6 Press Recording Start/Stop. When the counter reaches "0:00:00", editing stops automatically and
the camcorder enters the Insert-Pause mode.

END INSERT EDITING
7 Press STOP.

START/STOP REW PAUSE
INSERT PLAY
RM-V704U or RM-V700U (provided)

NOTES:
After step 5, Retake ( pg. 12) can be performed.
The tape may stop slightly before or after the designated end point, and noise bars may appear. Neither indicates a defect in the unit.
Only video signals are recorded in the Insert Editing mode.

Downloaded from: https://www.usersmanualguide.com/

Audio dubbing indicator

Viewfinder

e M-0:05:20

To MIC (capped)

Mike

REW

Audio Dubbing

EN 41

You can record a new soundtrack on a prerecorded tape (normal audio only).
** Perform steps 1, 2 and 3 of the Insert Editing procedure
( pg. 40) before continuing.
·The sound comes from the built-in mike (or an external mike if connected).

FIND EDIT-IN POINT
1 Press REW to go a little beyond the beginning of the scene onto which you want to dub new audio, press PLAY to view the recorded tape, then press PAUSE at exactly the point where dubbing should start.

ENGAGE AUDIO DUB STANDBY MODE
2 Press and hold A. DUB, and without releasing A. DUB, press and release PAUSE.

BEGIN AUDIO DUBBING
3 Press PLAY. When the counter reaches "0:00:00", Audio Dubbing stops automatically and the camcorder enters the Audio Dub-Standby mode.

END AUDIO DUBBING
4 Press STOP.

A. DUB PAUSE PLAY
RM-V704U or RM-V700U (provided)

NOTES:
Do not press FF or REW during Audio Dub-Standby, or the edit points will not be accurate.
If the mike is too close to the TV, or if the TV's volume is too high, whistling or howling may occur.
NOTES (for Insert Editing and Audio Dubbing):
Insert Editing and audio Dubbing may not work correctly if the tape contains blank segments, or if the recording speed was changed during the original recording.
To edit/dub onto a tape with the recording safety tab removed, cover the hole with adhesive tape.
Do not press STOP during Insert Editing or Audio Dubbing, or the edit points will not be accurate.
During Insert Editing and Audio Dubbing, when Insert Pause or Audio DubStandby is engaged, the counter may go slightly past "0:00:00". Recording, however, stops at exactly 0:00:00.

Downloaded from: https://www.usersmanualguide.com/

42 EN
SYMPTOM POWER
No power is supplied.
The power suddenly goes off and doesn't come back on by itself.
RECORDING
Recording cannot be performed.
Recording does not start.
PLAYBACK
The tape is running, but there's no playback picture.
Noise bars appear in the playback picture. Noise appears throughout the entire playback picture.
Playback picture is blurred or interrupted. The counter indication is blurred during Still playback. Tape was played back on VCR using cassette adapter but picture could not be viewed.
TAPE TRANSPORT
The tape stops during fast-forward or rewind. Rewinding or fast-forwarding cannot be performed.

TROUBLESHOOTING
POSSIBLE CAUSE(S)
The battery pack has not been attached correctly
( pg. 4). The battery pack is not charged ( pg. 4).
The power supply has not been correctly connected
( pg. 5).
The battery pack has completely discharged. Remove the cassette and disconnect the power source,
then after a few minutes, try turning the power back on. If it still doesn't come on, consult your nearest JVC dealer.
The recording tape's Erase Protection tab is missing. Cover the hole with adhesive tape. (Some tapes have sliding tabs. In this case, check the position of the tab.)
The camcorder Power switch has not been set to
"CAMERA" ( pg. 11).
The TV has not been set to its VIDEO mode. If A/V connection is used, the TV's VIDEO/TV switch has
not been set to VIDEO. The RF unit has not been set to the correct channel.
Manual Tracking has not been performed ( pg. 31).
This occurs when playing back a blank portion of tape. If this occurs when playing a recorded portion, there is a
possibility that the video heads are dirty or the camcorder is broken. Consult your nearest JVC dealer.
The video heads are dirty or worn out. Consult your nearest JVC dealer for head cleaning or replacement.
This is normal.
Tapes recorded in S-VHS cannot be played back on
regular VHS VCRs ( pg. 8).
Connect camcorder directly either to VCR or to TV, then
playback can be performed on camcorder ( pg. 28).
The Counter Memory Function has been activated
( pg. 31).
The tape is already fully wound on one reel or the other.

Downloaded from: https://www.usersmanualguide.com/

SYMPTOM OTHER
The tape won't eject. Some functions are not available. Vertical white lines appear when shooting a very bright object.
Bright, crystal-shaped spots appear in the viewfinder. An error number (i.e. E03) appears in the viewfinder.
The image is out of focus.
A character generator title and the date and time displays disappear from the viewfinder.
The wrong date and time are displayed/recorded.
Even though the Lens Cover is open, the Lens Cover Warning indicator blinks. When the camcorder is swung or shaken, a noise can be heard.

POSSIBLE CAUSE(S)

EN 43

The battery pack is running low.
The PROGRAM AE select dial is set to "AUTO LOCK".
This sometimes occurs when the contrast between the background and the object is great. It is not a defect of the camcorder.
Sunlight is directly entering the lens.
Turn the camcorder's power off, then disconnect the power source. After a few minutes, try turning the power on again. If the error number still appears in the viewfinder, consult your nearest JVC dealer.
The diopter needs to be adjusted ( pg. 6).
The scene being shot is adversely affecting the operation
of Auto Focus ( pg. 16).
If you remove the power source from the camcorder while the power is on, all settings and selections are erased. Make sure to turn the camcorder's power off before disconnecting the power source.
If you have not performed Date/Time Setting ( pg. 7),
the date and time are not displayed/recorded correctly. Be sure that Date/Time setting is carried out.
The Lens Cover Warning indicator may blink when the camcorder is used in dark areas, regardless of the position of the Lens Cover.
This camcorder is equipped with Auto Pause System which has a sensor for detection. Because of the sensor, when the camcorder is swung or shaken, noise can be heard from the sensor. This is not a malfunction.

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.) and clock battery; and then re-connect it and proceed as usual from the beginning.

Downloaded from: https://www.usersmanualguide.com/

44 EN
1 23

INDEX Controls
7890!@

#$% e

^ &*( )qw

Controls
1 Diopter Adjustment ............................ pg. 6 2 QUICK REC Button ............................ pg. 13 3 Power Zoom Lever ............................ pg. 12 4 BATT. [Battery] RELEASE Switch ......... pg. 4 5 Recording Start/Stop Button ................ pg. 11 6 POWER Switch ............................. pg. 11, 30 7 STOP Button ...................................... pg. 30 8 Tape Length [30·45·60]
Select Button ...................................... pg. 8
COUNTER R [Reset]/M [Memory]
Button ................................................ pg. 31 9 EDIT Button ....................................... pg. 37 0 R.A.EDIT CANCEL Button ................... pg. 36 ! ·S-VHS/VHS Recording Format
Select Button ................................... pg. 8 ·R.A.EDIT Button .............................. pg. 36 @ ·R.A.EDIT IN/OUT Button ................. pg. 36 ·AUTO PAUSE Button ....................... pg. 13

# REW Button ....................................... pg. 30 RETAKE R [Quick Review] Button ....... pg. 12
$ FF Button ........................................... pg. 30 RETAKE F Button ................................ pg. 12
% PLAY/PAUSE Button ........................... pg. 30
^ SELECT Button ................................... pg. 19
& SET Button ......................................... pg. 19
* PROGRAM AE Select Dial .................. pg. 14
( Multi-Function Control · Exposure +/ ................................... pg. 18 · Focus FAR/NEAR ............................. pg. 16 · Menu Setting Change ....................... pg. 24 · Tracking +/ .................................... pg. 31
) MENU Button .................................... pg. 24
q P. [Picture] STABILIZER Button ............ pg. 18
w PUSH Button ..................................... pg. 9
e EJECT Switch ...................................... pg. 9

Downloaded from: https://www.usersmanualguide.com/

EN 45

TY U I

O E Q

y uiop W P

rt R a

Connectors
r J terminal (JLIP (Joint Level Interface Protocol) Connector.) (Located beneath the jack cover) · Connect the Editing Cable when performing Random Assemble Editing ( pg. 35). ·It is used to connect the camcorder to a device such as a personal computer. For further detail consult your nearest JVC dealer. Information (in English) is also available at our home page: http://www.jvc-victor.co.jp/
t External MIC Jack (capped) ................. pg. 41 y DC IN Jack ......................................... pg. 5 The jacks u to p are located beneath the jack
cover.
u AUDIO OUT Jack .............................. pg. 28 i VIDEO OUT Jack ............................... pg. 28 o S -VIDEO OUT Jack .......................... pg. 28 p RF DC OUT Jack ................................ pg. 29

Indicators
Q Tally Lamp ......................................... pg. 11
W Power On Indicator ........................... pg. 11
Other Parts
E · Camera sensor Be careful not to cover this area; built-in here is the sensor necessary for shooting.
· Remote sensor ................................. pg. 39 R Microphone ....................................... pg. 41 T Shoulder Strap Eyelets ........................ pg. 10 Y Clock Battery Compartment ................ pg. 6 U Battery Pack Mount ........................... pg. 4 I Electronic Viewfinder ......................... pg. 6 O LENS COVER Switch ......................... pg. 11 P Grip Strap .......................................... pg. 10 a Tripod Mounting Socket ...................... pg. 10

Downloaded from: https://www.usersmanualguide.com/

46 EN
7 8 9 0 ! @ # $

INDEX Viewfinder

456

18min

Disp.

REC

Sepia

AUTO

MWB

P AUSE

(

1min

APS ON INDEX

)

1/2s TAPE END

Merry Christmas

25. 12. 97

10 : 45 : 56

Viewfinder Indications

1 Cassette Warning/Remaining Tape Time .......................................... pg. 11 When no cassette is inserted: the Cassette ( ) Warning blinks. When Erase Protection tab is not in the position that allows recording: the Cassette ( ) Warning lights. Otherwise, the Remaining Tape Time is displayed.
2, 8 PROGRAM AE Indicator ................ pg. 14
Displayed at 2 for approx. 1 second when the PROGRAM AE select dial is switched from one position to another. Then only the indicator remains at 8.
2, 9 Fade/Wipe Standby Indicator ........ pg. 19
Displayed at 2 for approx. 2 seconds when the Fade/Wipe is switched from one function to another by pressing the SET button. Then only the indicator remains at 9.
3 Program Manager Function Indication .......................................... pg. 19 Appears when the PROGRAM AE select dial is set to any position other than AUTO LOCK.
4 Recording Format Indicator ................ pg. 8
5 Tape Length Display .......................... pg. 8
6 Zoom Indicator Bar ............................ pg. 12
7 Recording Indicator ........................... pg. 11
0 Picture Stabilizer Indicator .................. pg. 18 ! Interval Time/Recording Time
Indicator ............................................ pg. 26
@ ·RecordStandby Mode Indicator ...... pg. 11
·Lens Cover Warning:
LENS COVER .................................. pg. 11 ·Auto Pause System Indicator ............ pg. 13
# Instant Titles Display .......................... pg. 20
$ Date/Time Character Display .............. pg. 22

% Battery Pack Remaining Power Indicator

Changes as follows according to the battery pack's

remaining power level: "

When the power is almost gone, the indicator

blinks, then the unit shuts off. Replace the

battery pack with a fully charged one.

(Note: The symbol containing 3 darkened

squares -- -- does not necessarily mean

that the battery pack is fully charged.)

^ Focus Indicator .................................. pg. 16

& Exposure Level Indicator ..................... pg. 18

* White Balance Mode Indicator ........... pg. 23

( Menu Setting Change Indicator ........... pg. 24

) Index Code Marking .......................... pg. 39

q Clock Warning

Once the power is turned on and the indicator

blinks for about 10 seconds, perform the date

and time settings ( pg. 7). After setting is

complete, turn the power off and disconnect the

power source. If you re-connect it and turn the

power on and the indicator is blinking, that

means that the clock (lithium) battery is either

not installed or has discharged. Install, or replace

the old battery with, a new one ( pg. 6).

w · Tape End Display: TAPE END ........... pg. 11

Appears when the end of the tape is reached

during playback, recording or fast-forward.

· Condensation Warning:

When this indication appears, all functions are

disabled. Turn the unit off (without removing

the power source) for a few hours, and when

you turn it on again the indicator should

disappear.

Downloaded from: https://www.usersmanualguide.com/

CAUTIONS
General Battery Precautions
· When the C-P6U or C-P7U (cassette adapter) is not functioning even when correctly operated, the batteries are exhausted. Replace them with fresh ones.
· Use only the following batteries: C-P6U or C-P7U .................... R6 (AA) size
Please make note of the following rules for battery use. When misused, batteries can leak or explode.
1. Refer to the instructions when replacing the battery.
2. Do not expose batteries to excessive heat as they can leak or explode.
3. Do not dispose of batteries in a fire. 4. Remove the battery from the unit if it is to be
stored for an extended period to avoid battery leakage which can cause malfunctions.

Battery Packs
The supplied battery pack is a nickelcadmium battery. Before using the supplied battery pack or an optional battery pack, be sure to read the following cautions:

1. To avoid hazard . . . .... do not burn.

Terminals

.... do not short-circuit the terminals.

.... do not modify or disassemble.

.... use only specified chargers.

2. To prevent damage and prolong service
life . . . .... do not subject to unnecessary shock. .... avoid repeated charging without fully
discharging. .... charge in an environment where
temperatures are within the tolerances shown in the chart below. This is a chemical reaction type battery--cooler temperatures impede chemical reaction, while warmer temperatures can prevent complete charging. .... store in a cool, dry place. Extended exposure to high temperatures will increase natural discharge and shorten service life. .... avoid prolonged uncharged storage. .... remove from charger or powered unit when not in use, as some machines use current even when switched off.

3. To prevent damage to the camcorder . . . .... replace the battery pack when it begins to deliver less recording time per charge.

EN 47
NOTE:
It is normal for the battery pack to be warm after charging, or after use. Temperature Ranges Charging ................................... 10°C to 35°C Operation ................................. 0°C to 40°C Storage ...................................... 10°C to 30°C
NOTES:
Recharging time is based on room temperature of 20°C.
The lower the temperature, the longer recharging takes.
Cassettes
To properly use and store your cassettes, be sure to read the following cautions:
1. During use . . . .... make sure the cassette bears the S-VHS-C or VHS-C mark. .... be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals. .... make sure the cassette is positioned properly when inserting. .... do not load and unload the cassette repeatedly without allowing the tape to run at all. This slackens the tape and can result in damage. .... do not open the front tape cover. This exposes the tape to fingerprints and dust.
2. Store cassettes . . . .... away from heaters or other heat sources. .... out of direct sunlight. .... where they won't be subject to unnecessary shock or vibration. .... where they won't be exposed to strong magnetic fields (such as those generated by motors, transformers or magnets). .... vertically, in their original cases.

Downloaded from: https://www.usersmanualguide.com/

48 EN
Main Unit
1. For safety, DO NOT . . . .... open the camcorder's chassis. .... disassemble or modify the unit. .... short-circuit the terminals of the battery pack. Keep it away from metallic objects when not in use. .... allow inflammables, water or metallic objects to enter the unit. .... remove the battery pack or disconnect the power supply while the power is on. .... leave the battery pack attached when the camcorder is not in use.
2. Avoid using the unit . . . .... in places subject to excessive humidity or dust. .... in places subject to soot or steam such as near a cooking stove. .... in places subject to excessive shock or vibration. .... near a television set. .... near appliances generating strong magnetic or electric fields (speakers, broadcasting antennas, etc.). .... in places subject to extremely high (over 40°C) or extremely low (under 0°C) temperatures.
3. DO NOT leave the unit . . . .... in places of over 50°C. .... in places where humidity is extremely low (below 35%) or extremely high (above 80%). .... in direct sunlight. .... in a closed car in summer. .... near a heater.
4. To protect the unit, DO NOT . . . .... allow it to become wet. .... drop the unit or strike it against hard objects. .... subject it to shock or excessive vibration during transportation. .... keep the lens directed at extremely bright objects for long periods. .... direct the eyepiece of the viewfinder at the sun. .... carry it by holding the viewfinder. .... swing it excessively when using the shoulder strap.
5. This camcorder features a built-in head cleaner which automatically cleans the heads and head drum when a cassette is loaded or unloaded. If, however, the heads become dirty and cause blurriness or interruption in the playback picture, consult your nearest JVC dealer.

CAUTIONS (cont.)
About moisture condensation . . . ·You have observed that pouring a cold liquid into
a glass will cause drops of water to form on the glass` outer surface. This same phenomenon occurs on the head drum of a camcorder when it is moved from a cool place to a warm place, after heating a cold room, under extremely humid conditions or in a place directly subjected to the cool air from an air conditioner. ·Moisture on the head drum can cause severe damage to the video tape, and can lead to internal damage to the camcorder itself.
Serious malfunctioning
If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer.
For Your Maintenance
1. After Use 1 Set the power switch to POWER OFF to turn off the camcorder. 2 Slide EJECT to open the cassette holder, then remove the cassette. 3 Close and lock the cassette holder by pressing PUSH. 4 Press BATT. RELEASE to remove the battery pack. 5 Slide the LENS COVER open/close switch to close the lens cover.
2. Cleaning The Camcorder 1 CLEAN EXTERIOR Wipe gently with a soft cloth. 2 CLEAN LENS Blow it with a blower brush, then wipe gently with lens cleaning paper. 3 REMOVE EYEPIECE Turn the eyepiece counterclockwise and pull it out. 4 CLEAN VIEWFINDER Remove dust using a blower brush. 5 RE-ATTACH EYEPIECE Align the marks, re-attach the eyepiece and turn it clockwise.
NOTES:
Avoid using strong cleaning agents such as benzine or alcohol.
Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.
Mold may form if the lens is left dirty.

Downloaded from: https://www.usersmanualguide.com/

SPECIFICATIONS

GENERAL

Format

: S-VHS/VHS PAL standard

Power source

: DC 6 V }

Power consumption : 6.8 W

Signal system

: PAL-type

Video recording system

Luminance

: FM recording

Colour

: Converted sub-carrier

direct recording

Conforms to S-VHS

standard

Cassette

cassette

Tape speed

: 23.39 mm/sec

Recording time

Max.

: 60 minutes

(with EC-60 cassette)

Operating temperature : 0°C to +40°C

Operating humidity : 35% to 80%

Storage temperature : 20°C to +50°C

Weight

: Approx. 860 g

Dimensions

: 112 (W) x 112 (H) x

232 (D) mm

CAMERA Pick up Lens
Viewfinder White balance
adjustment

: 1/4" format CCD : F1.6, f = 3.8 to 68.4 mm,
18:1 power zoom lens with auto iris and macro control, filter diameter 46 mm : Electronic viewfinder with 0.5" B/W CRT
: Auto/Manual adjustment

VIDEO Output

: 1 Vp-p, 75 ohms, unbalanced (via VIDEO out connector)

AUDIO Output
External microphone input

: 8 dBs, 1 k-ohm (via AUDIO out connector)
: 68 dBs, high impedance, unbalanced with ø3.5 mm (MONO)

EN 49

AC POWER ADAPTER/BATTERY CHARGER (AA-V11EG)

Power requirement Power consumption Output
Charging system
Dimensions Weight

: AC 110 to 240 V`, 50/60 Hz
: 23 W : DC 8.5 V }, 1.3 A
(CHARGE), DC 6.3 V }, 1.8 A (VTR) : Constant current, peak detection, timer controlled : 150 (W) x 42 (H) x 68 (D) mm : Approx. 350 g

CASSETTE ADAPTER (C-P7U)

Dimensions
Weight Accessory

: 188 (W) x 25 (H) x 104 (D) mm
: Approx. 240 g : "R6 (AA)"-size battery x 1

Provided Accessories ...................... pg. 3

Optional Accessories
·Battery Packs BN-V12U, BN-V22U, BN-V25U ·Car Battery Charger BH-V3E ·RF Unit RF-V5E ·S-VHS-C Cassettes SE-C45/30 ·VHS-C Cassettes EC-60/45/30 ·Active Carrying Bag CB-V7U ·Wireless Remote Control Unit RM-V704U or
RM-V700U
Some acccessories are not available in some areas. Please consult your nearest JVC dealer for details on accessories and their availability.
E.&O.E.Design and specifications subject to change without notice.

Downloaded from: https://www.usersmanualguide.com/

GR-SZ3000

VICTOR COMPANY OF JAPAN, LIMITED

Printed in Japan
* * 0597TOV UN SN

This file has been downloaded from: www.UsersManualGuide.com
User Manual and User Guide for many equipments like mobile phones, photo cameras, monther board, monitors, software, tv, dvd, and othes.. Manual users, user manuals, user guide manual, owners manual, instruction manual, manual owner, manual owner's, manual guide, manual operation, operating manual, user's manual, operating instructions, manual operators, manual operator, manual product, documentation manual, user maintenance, brochure, user reference, pdf manual
Downloaded from: https://www.usersmanualguide.com/

References

GPL Ghostscript 9.23