ART Model 416 Six Channel Personal Mixer with EQ and EFX

Front Panel Controls and Indicators

The front panel features a comprehensive set of controls for managing audio inputs and outputs:

• POWER: Main power switch.
• LEVEL Controls (1-6): Individual level adjustments for each of the six input channels.
• TREBLE: Master tone control for treble frequencies.
• BASS: Master tone control for bass frequencies.
• EFX LEVEL: Controls the overall level of the effects send.
• MASTER LEVEL: Controls the main stereo output level.
• Input Channels:
  • XLR INPUTS (1-3): Balanced microphone or line inputs. Each has an associated LEVEL control and CLIP LED indicator.
  • MIC/LINE Selector Buttons: Three buttons, one for each XLR input, to select between microphone and line level signals.
  • PHANTOM POWER DIP Switch Selectors: Three switches, one for each XLR input, to enable +12VDC phantom power for condenser microphones or active DI boxes.
  • SOURCE RCA INPUTS (L/R): Three sets of stereo line inputs via RCA connectors, each with its own LEVEL control.
• Effects Loop:
  • EFFECTS SEND (1/4 inch): Output jack for sending signal to an external effects unit.
  • EFX LOOP RETURN (L/R, 1/4 inch): Input jacks for receiving the stereo output from an external effects unit. These jacks can also be used as alternate stereo line inputs.
  • EFX LOOP LEVEL: Controls the level of the signal returning from the effects unit.
  • EFX LOOP IN/OUT Push Button: Engages or disengages the effects loop.
• Outputs:
  • MAIN OUTPUT (Left/Right): Stereo line-level outputs for connecting to a main mixer, amplifier, or recording device.
  • RECORD OUT (Left/Right, RCA): Dedicated stereo outputs for recording purposes.
• Indicators:
  • CLIP LEDs: Indicate signal clipping for each XLR microphone/line input.
• Rear Panel Features:
  • AC INPUT: IEC style power connector.
  • CE Marking: Indicates compliance with European Union standards.
  • Warning Labels: CAUTION, ATTENTION: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR, RISK OF ELECTRIC SHOCK DO NOT OPEN.
  • Manufacturer Information: Applied Research & Technology, Designed and developed in the U.S.A., Manufactured in China.
  • Fuse Holder: T 0.5A, 250V.

Specifications

• Input Impedance: Mic: 600 ohms; XLR LINE: 22K ohms; SOURCE RCA INPUTS: 22K ohms; FX LOOP L and R RETURN: 22K Ohms (unbalanced)
• Max. Input Level: XLR: -10dBV MIC level/+20dB LINE level; SOURCE RCAs: 24dBV
• Phantom Power: +12VDC
• Output Level: +17dBV
• Output Impedance: 51 ohms
• Max. Gain: 55dB MIC, 26dB SOURCE
• EQ: +/- 12dB @ 100 Hz & 10KHz (BASS and TREBLE)
• DNR (Dynamic Noise Reduction): 82dB
• Power Requirements: 120VAC / 50-60Hz, or 240VAC / 50Hz, 15VA
• Dimensions: 19 inches x 1.75 inches x 6 inches (480mm x 44.5mm x 152mm)
• Weight: 6.1 lb. (2.8kg)

Features

• Three XLR MIC/line inputs, each with an individual LEVEL control and CLIP LED.
• Three MIC/LINE input level selector buttons, one for each XLR input.
• Three PHANTOM POWER DIP switch selectors, one for each XLR input.
• Three sets of L and R RCA SOURCE INPUTS, each with its own LEVEL control.
• BASS and TREBLE master controls for tone shaping.
• LEVEL MASTER for overall output volume control.
• 1/4 inch EFFECTS SEND jack for external effects.
• L and R EFX LOOP RETURN jacks for external effects or alternate stereo line inputs.
• EFX LOOP LEVEL control and IN/OUT push button for effects management.

Usage Instructions

1. Verify proper voltage selection on the IEC style power connector for your location. Connect the AC cord to a grounded AC outlet.
2. Connect microphones or balanced line inputs to the XLR sockets.
3. For mic channels requiring phantom power (for condenser mics), press the DIP switch down to activate phantom power to the appropriate XLR jack.
4. Set the MIC/LINE buttons as required for each type of input signal.
5. Connect stereo signal sources (e.g., tape deck, CD player) to the SOURCE INPUTS using RCA-tipped unbalanced cables.
6. To patch-in external effects: connect the EFX LOOP SEND jack to the input of the effects unit using a shielded TS (unbalanced) cable, and connect the unit's stereo outputs to the LEFT and RIGHT EFX LOOP RETURN jacks using shielded TS (unbalanced) cables. Set the EFX LOOP IN/OUT button to the IN position and adjust the EFX LEVEL control for the desired effects intensity.
7. The L and R EFX LOOP RETURN jacks may alternately be used as a stereo line input with their own level control and in/out button.
8. Connect either the 1/4 inch LEFT and RIGHT OUT jacks or the RCA REC OUT jacks to the input of your mixer, tape deck, or computer using appropriate unbalanced, shielded cables.
9. Switch on the power. Set the MASTER LEVEL to the 12 o'clock position. Adjust individual channel LEVEL controls for the best mix and level, monitoring the MICROPHONE channel CLIP LEDs. Reduce the level of any channel with CLIP activity until it stops.
10. Adjust BASS and TREBLE controls for the desired tonal balance; the center setting is neutral.
11. Re-adjust the MASTER LEVEL as required for the best overall signal level.

Warranty Information

Limited Warranty

Applied Research and Technology (ART) warrants this product and its components to be free from defects in workmanship and materials for a period of one year from the date of purchase. ART will, at its option, repair or replace defective product or component parts upon prepaid delivery to the factory service department or an authorized service center, accompanied by proof of purchase date (valid sales receipt).

Exclusions

• This warranty does not apply in the event of misuse, abuse, or unauthorized alterations or repairs.
• The warranty is void if the serial number is altered, defaced, or removed.
• ART reserves the right to make design changes or improvements without obligation to install them on previously manufactured products.
• ART shall not be liable for any consequential damages, including damages resulting from loss of use. Some states may not allow limitations of incidental or consequential damages, so these limitations may not apply to you.

For units purchased outside the United States, an authorized distributor of Applied Research & Technology will provide service.

Service Instructions

1. Ensure the unit is the cause of the problem. Verify all cables are connected correctly and are in working condition.
2. If the unit is determined to be at fault, write a complete description of the problem, including how and when it occurs. Detail your complete setup before contacting Customer Service.
3. Call the factory at (585) 436-2720 to obtain a Return Authorization (RA) number.
4. Pack the unit in its original carton or a suitable substitute. The original carton is not recommended as a shipping carton; place the packaged unit in another box for shipping. Print the RA number clearly on the outside of the shipping box and include your return shipping address on the outside of the box.
5. Include with your unit: a return shipping address (P.O. Boxes are not accepted), a copy of your purchase receipt, a daytime phone number, and a description of the problem.
6. Ship only the unit (keep your manual!) to:
   APPLIED RESEARCH AND TECHNOLOGY
   215 TREMONT STREET
   ROCHESTER, NEW YORK 14608
   ATTN: REPAIR DEPARTMENT
   RA# ____________________
7. Contact Customer Service at (585) 436-2720 for your Return Authorization number or for technical assistance or repair inquiries. Customer Service hours are 9:00 AM to 5:30 PM Eastern Time, Monday through Friday.

Company Contact:
APPLIED RESEARCH & TECHNOLOGY
215 TREMONT STREET
ROCHESTER, NEW YORK 14608 USA
Phone: (585) 436-2720
Fax: (585) 436-3942
Website: www.artproaudio.com
Email: cserve@artproaudio.com