Installation Guide for Humanscale models including: M21M33CSBTBNA Mounting Arm For Monitor, M21M33CSBTBNA, Mounting Arm For Monitor, Arm For Monitor, For Monitor, Monitor

M21 Direct Wall Mount Instructions rv01

Download

Humanscale Mounting Arm for Monitor - Silver, Gray M21M33CSBTBNA: Mounting Kits - COLAMCO.com

User Manual

Humanscale Mounting Arm for Monitor - Silver, Gray - Caretek IT Solutions

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized
• Document:
  • References

File Info : application/pdf, 2 Pages, 4.82MB

STEP 7:
Position the stop ring to limit the arm's range of motion if desired. The marked angle will be in the center of the range of motion.

Arm can rotate 90º

Arm can rotate 180º

Arm can rotate without stopping

STEP 8: Insert monitor arm into the mount until release button locks in place.
To remove arm press release button and pull the arm up near the joint.

www.humanscale.com

Direct Wall Mount Installation Instructions

HSM21SDWMI0418

STEP 1: Remove the plastic front cover.
STEP 2: Remove the two side screws and top screw from the mount and Separate the mounting plate from the rest of the mount.
STEP 3: Attach the mounting plate to a wall stud or other structural support using the screws provided. Mounting to drywall alone is not recommended. Use level to ensure that mounting plate is perfectly level.

STEP 4: Align the mount with the mounting plate on the wall.
STEP 5: Reinstall the two side screws and top screw into the mount and tighten.
STEP 6: Reinstall the plastic cover.



References