User Manual for Veise models including: G2 Smart Lock WiFi Gateway, G2, Smart Lock WiFi Gateway, Lock WiFi Gateway, WiFi Gateway, Gateway
Veise G2 Gateway, Smart Lock WiFi Gateway, Paired with Smart Door Lock to Realize APP Remote Control, Compatible with DD Lock APP and TT Lock APP
G2 Technical documentation
Smart Lock Gateway User Manual Thank you for purchasing our products. Please review this manual thoroughly before operating your device. All pictures in this manual are for illustration purpose only. Actual product may vary due to product upgrade. Pair with App 1 Open the App 2 Tap on "" on the upper left corner of the screen 3 Select [Gateway] APP Add lock Gateway Message Customer service settings SMART LOCK GATEWAY G2 Model : Dimensions : Network : IEEE standard : Power interface : Power input : G2 70mm x 70mm x 26mm WiFi 2.4G 802.11 b/g/n Type-C USB 5V/500mA Light Status When the Gateway is powered on: Flashing Red/Blue lights: Stand-by mode - Ready to Pair Blue light: Normal mode Red light: Network failure Pair with App 4 Select [ G2 ] GatewayG1 5 Plug in the Gateway and power it on G2 6 While the light is flashing in Red and Blue alternately, tap on " " Add Gateway AIDJDNV62SJ Online AIDJDNV62SJ Online AIDJDNV62SJ Online Pair with App 7 Add Gateway Add Gateway WIFI WiFi password Gateway name Next 8 Select the network and enter your Wi-Fi password. Add Gateway WIFI WiFi password Gateway name cancel network sciener mywifi sciener-x Notice If the above process times out, please power off and try again. FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC's RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. Disclaimer We continuously optimize products as new technologies and features are developed. For this reason, we reserve the right to make alterations to the products without prior notice.Adobe PDF library 15.00 Adobe Illustrator(R) 24.0