PerformanceDIY - DIY Certified Epoxy & Polyaspartic Coating kits
PerformanceDIY - DIY Certified Epoxy & Polyaspartic Coating kits
Instruction Manual for PerformanceDIY models including: 300 Poly, 300, Poly
Poly 300 Instructions Ab – PerformanceDIY
File Info : application/pdf, 2 Pages, 1.20MB
DocumentDocumentPoly 300 Installation Instructions 12-15-23 Monday-Friday 9-5PM Tech Support Saturday 11-3PM EST (800) 841-5580 EST www.PerformanceDIY.com Install spike shoes. Note: Mix ratio is 1 to 1 by volume ____Step 1: Pour ½-gallon contents of Part "A" Poly 300 into the large clean black container. ____Step 2: Pour ½-gallon contents of Part "B" into the same large clean black container. ____Step 3: Mix thoroughly for 2 minutes ____Step 4: Starting in the farthest corner of the room, pour all mixed contents (parallel to and approx. two feet from the wall"). Using the kit brush, cut in the perimeter walls or any other obstruction that may be hard to roll. ____Step 5: Using the kit squeegee, (perpendicular to the poured line of mixed Poly 300) draw the poly from the back wall with the squeegee until there is no longer wet poly to draw back. Continue to squeegee pulling this product down the line until complete. ____Step 6: With the kit roller, perpendicular to squeegee application, roll the poly until even and consistent. Repeat steps for additional batch applications ____Step 7: lesser amounts (only in the previous section which has been back rolled a 2nd time). Taking a pinch amount apply by to get even coverage. to your desired needs. PerformanceDIY.com non-skid additive is industry standard and accepted means for creating a proper recommended OSHA 0.5 COEFFECIENT FRICTION slip resistant non-skid surface. 169 N. Gratiot · Mt. Clemens, MI 48043 Industrial & Commercial O: 800-841-5580. F: 586-468-844 Surface Coatings: Garage PerformanceDIY.com Basement Deck & Patio Driveways Paver Coating Counter Tops Concrete Patch