Our innovative fabric tensioning motor is designed to get the most out of external shades and blinds.
Key Features
Designed for Zipscreen ⚙️
The FT motor is specifically designed to perfectly situate and function within the hardware of the flagship external shading system, Zipcreen.
Fabric Tensioning ↑
Features selectable modes including E-Type (Default / Off) and Auto FT Mode for one-action lock and tensioning with our Ultra-Lock hardware.
Favourite Position ☆
Regularly used shade positions can be set and activated at the quick touch of a button.
Battery Check Action ?
When connected to a battery and Push remote, the motor will move the shade to indicate battery remaining.
Optimised for Ultra-lock ?
When used with the innovative Ultra-Lock, the FT motor closes, locks, and tensions the shade in one, automatic action, requiring no manual intervention.
Impact Detection ?
The FT redirects movement to protect the motor, hardware, and fabric if the path of the shade is obstructed by an unexpected obstacle, ensuring the longevity of the system hardware.
Sensor Compatibility ?
Pair with a range of sensors to create an automatic shading system that adjusts according to weather conditions.
12V Input ⚡
The DC FT motor is ideal for installations without an electrician or where AC power is not easily accessible.
ARC Technology
ARCTM (Automate Radio Communication) is Rollease Acmeda's proprietary technology utilizing 433MHz radio communication with bi-directional feedback that brings Automate motorized shading systems together.
Product Specifications
| Part #: | MT01-1245-069001 AUTOMATE ARC DCFT Motor [Ø45/12V/10rpm] |
| Voltage | 12V-DC |
| Torque | 15 Nm |
| Max Run Time | 12 min |
| Speed | 10 RPM |
| Radio Frequency | 433.92 MHz |
| RF Modulation | FSK |
| IP Rating | IP44 |
| Limit Switch Type | Electronic |
| Current | 4.1 A |
| Temp Working Range | 50°F to 131°F (-10°C to 55°C) |
| Insulation Class | A |
| Power | 50 W |
Dimensions
The DCFT motor features a body diameter of approximately 1 3/4" (44.60mm) and a shaft diameter of 3/8" (10mm). The overall assembly length can extend up to 22 1/2" (572mm).
Compatible Parts
Tubes
- Aluminium 78mm STD
- Aluminium 78mm HD
- Steel 78mm
Crown / Reducer
RE20-0311-050178
Drive
MT03-0106-050006
Note: Due to integrated impact detection, DCFT motor MT01-1245-069001 is not compatible with the 'impact detect' drive.
Compatible Products
Controllers
- Pulse HUB & App
- Push Remotes
Sensors
- Sun and Wind Sensor
Power Options
- Battery Pack
Rollease Acmeda - Precision in Motion
