Assembly Instructions
Important: Please do not return to the store. For missing or damaged parts, contact us for free replacements and an extra 6-month warranty. Email: Nicesure-aftersales@outlook.com.
Assembly Steps
- Initial Tightening: Use a hex key (Allen wrench), not a power drill, to tighten each screw to about 50% before fully securing any of them. Fully tightening one screw too early may cause others to misalign.
- Final Tightening: Once all parts are aligned, gradually and evenly tighten all screws using the proper tools.
- Misalignment Fix: If some screws don't line up, loosen all screws to 50%, adjust the parts, and try again.
- Stability Issue: If the item feels unstable, loosen all screws, adjust it on a flat surface, then retighten them evenly.
Hardware Fittings
| Item No. | Reference Image | Description | Qty. | Extra Spare Parts Qty. |
|---|---|---|---|---|
| A | [Screw] | screw M8*35 | 4 | 1 |
| B | [Screw] | screw M8*30 | 11 | 1 |
| C | [Spring Washer] | spring washer for M8 | 15 | 1 |
| D | [Nut] | nut for M8 | 15 | 1 |
| E | [Washer] | washer for M8 | 15 | 1 |
| F | [Screw Cap] | Screw cap | 15 | 1 |
| G | [Adjustable Foot Pad] | Adjustable foot pads | 4 | 1 |
| H | [Allen Key] | allen key for M8 | 1 | 0 |
| J | [Spanner] | Spanner for M8 | 1 | 0 |
| K | ||||
| L |
Assembly Visual Guide
Step 1: Attach the legs to the main structure. The diagram shows two legs being attached to the central frame using screws (Item A, M8*35) and washers (Item E). Adjustable foot pads (Item G) are shown screwed into the base of the legs.
Step 2: Continue assembling the remaining parts. The diagram shows the structure taking shape, with more screws being used to connect components. It indicates tightening screws to approximately 50% as per the initial tightening instructions.
Step 3: Finalize the assembly. The diagram shows the fully assembled furniture piece, resembling an ornate chair or table base, with all screws tightened.
