ÅRSUNDA Armchair Assembly Instructions
Brand: IKEA
Model: ÅRSUNDA
Product Code: AA-2384381-4
Introduction
This document provides assembly instructions for the IKEA ÅRSUNDA armchair.
Please read all instructions carefully before beginning assembly.
Parts List
- 4x Screw (106916)
- 4x Screw (105236)
- 2x Screw (100001)
- 4x Screw (106917)
- 8x Wooden Dowel (101357)
- 4x Nut (130718)
- 1x Allen Key (130718)
Assembly Steps
Step 1: Assemble Base Frame
Attach the two side frame pieces to the front crossbar.
Use two screws (100001) and two nuts (130718). Tighten with the Allen key [screwdriver-icon]. Ensure correct orientation as shown; avoid overtightening [cross-mark-icon].
[info-icon] Check that parts are correctly oriented before tightening.
Step 2: Attach Upper Backrest Frame
Connect the upper section of the backrest frame to the side frame pieces.
Use two screws (106917). Tighten with the Allen key [screwdriver-icon].
Step 3: Attach Lower Backrest Frame
Connect the lower section of the backrest frame to the side frame pieces.
Use two screws (106917). Tighten with the Allen key [screwdriver-icon].
Step 4: Fit Seat Cushion
Place the seat cushion onto the frame.
Fold the fabric over the frame and secure it using the integrated straps [hook-and-loop-icon]. Ensure the cushion is aligned correctly.
Step 5: Fit Back Cushion
Place the back cushion onto the frame.
Fold the fabric over the frame and secure it using the integrated straps [hook-and-loop-icon]. Ensure the back cushion is aligned correctly.
Step 6: Attach Armrests
Position the armrests onto the frame.
Secure each armrest to the frame using two screws (105236) and two screws (100001). Tighten with the Allen key [screwdriver-icon].
Step 7: Insert Dowels
Insert eight wooden dowels (101357) into the designated holes on the armrest supports.
Step 8: Attach Backrest to Seat
Align the backrest assembly with the seat frame.
Secure using two screws (100001). Tighten with the Allen key [screwdriver-icon]. Ensure correct orientation; avoid overtightening [cross-mark-icon].
Step 9: Attach Armrests to Backrest
Connect the armrests to the backrest frame.
Use two screws (105236) and two screws (100001) per armrest. Tighten with the Allen key [screwdriver-icon].
Step 10: Final Assembly
Attach the remaining crossbars to the base of the armchair.
Use four screws (100001) and four screws (106916). Tighten with the Allen key [screwdriver-icon]. Ensure all connections are secure.