EXIT Silhouette Sports Trampoline

Product Specifications

• Model Sizes: Ø244cm, Ø305cm, Ø366cm, Ø427cm
• Weight Limits: Ø244/Ø305 - 100kg, Ø366/Ø427 - 120kg
• Recommended Age: 14+
• Assembly Required: Yes, by an adult

Warning: Choking hazard due to small parts. Adult assembly required. Retain this information for future reference.

Parts List and Diagrams

The following sections detail the components and assembly steps. Each step is illustrated with diagrams and a list of required parts for different trampoline sizes.

Step 1: Frame Assembly

Assemble the main frame using parts labeled 1, 2, 3, and 5. Specific quantities vary by trampoline size (e.g., 8ft-10ft require 6x part 2, 12ft-14ft require 8x part 2).

Step 2: Spring Attachment Preparation

Attach part 4 to the frame. For 8ft-10ft trampolines, use 3x part 4. For 12ft-14ft trampolines, use 4x part 4.

Step 3: Attaching the Jumping Mat

Connect the jumping mat to the frame using the springs (part 6). The number of springs required depends on the trampoline size: 8ft requires 42x part 6, 10ft requires 54x part 6, 12ft requires 72x part 6, and 14ft requires 80x part 6.

Step 4: Securing the Jumping Mat

Further secure the jumping mat using the provided cord (part 11). Follow the diagrams for proper threading and tightening. Ensure the cord is pulled tight.

Step 5: Attaching the Safety Net

Attach the safety net poles (part 7) to the frame. Use 3x part 7 for 8ft-10ft models and 4x part 7 for 12ft-14ft models. Then, attach the safety net itself using the provided straps and cord (parts 8, 9, 10, 11).

Step 6: Installing the Protective Padding

Place the protective padding (part 10) over the springs and frame edges. Secure the padding using the provided cord (part 11) by threading it through the loops as shown in the diagrams.

Step 7: Final Frame Assembly

Complete the frame assembly by attaching the remaining frame parts and ensuring all connections are secure. Use parts 7a and 7b as indicated in the diagrams.

Step 8: Securing the Jumping Mat to the Frame

Ensure the jumping mat is evenly attached to the frame using the springs. The diagrams show how to attach the mat at points A, B, and C.

Step 9: Attaching the Safety Net Poles

Attach the safety net poles (part 15) to the frame.

Step 10: Final Spring Attachment

Complete the attachment of the jumping mat to the frame by connecting the remaining springs (part 12). Use 3x part 12 for 8ft-10ft models and 4x part 12 for 12ft-14ft models.

Tools Required

• Tape Measure
• Cord (minimum 5 meters long)

Contact Information

For inquiries, contact Dutch Toys Group B.V. at Edisonstraat 83, 7006 RB Doetinchem, The Netherlands. Email: info@exittoys.com. Website: www.exittoys.com.

EXIT Toys is part of the SIMBA DICKIE GROUP. EXIT Toys is a registered trademark of Dutch Toys Group.