BLUEVENT FG-ADM240E Smart Komposter User Guide

User Guide for BLUEVENT models including: FG-ADM240E, FG-ADM240EA, FG-ADM240E Smart Kompo Ster, FG-ADM240E, Smart Kompo Ster, Kompo Ster, Ster

BLUEVENT MUMU FG-ADM240E Smart Komposter

File Info : application/pdf, 28 Pages, 4.58MB

Manual 220V FG-ADM240E EA UM EN EU 240507 ?v=1727192839

Smart Food Composter FG-ADM240E/FG-ADM240EA User Guide
Read and follow the instructions in this guide to properly use and maintain the product.

Index

Guide

Important safety instructions

Save these instructions

Precautions when using the product

Safety symbols in this guide

Product placement

Power supply

Usage and care

1 Usage and care

1.1 Checking the components

1.2 Name and role of each part

1.2.1 Front view

1.2.2 Back view

1.2.3 Interior view

Instructions

2 Installation

2.1 Choosing an appropriate location

3 Getting started

4 Using the product

4.1 Connecting the product to power

4.2 Opening and locking the lid

4.2.1 Opening the lid

4.2.2 Locking the lid

4.3 Understanding the display

4.3.1 Standby mode (before food input)

4.3.2 Storage mode

4.3.3 Processing and cleaning progress

4.3.4 Processing completed

4.4 Guidelines for food waste disposal

4.4.1 Types of food not suitable for disposal

4.4.2 Types of food that require caution

4.5 Using AI mode

4.6 Using Normal mode

4.7 Using Green mode

4.8 Using Cleaning mode

4.9 Useful features

4.9.1 Turning the voice guidance function on and off

4.9.2 Using the empty bucket/empty food detection feature

4.9.3 Understanding the power saving feature

Management 5 Troubleshooting

Methods

6 Product care and maintenance

6.1 Replacing the activated carbon

6.2 Cleaning the stainless steel cover

7 Product FAQs

7.1 Power and electrical usage

7.2 Product usage

8 Specifications

Important safety instructions
When using the composter, basic precautions are always to be followed, including the following: · Read all the instructions before using the composter. · To reduce the risk of injury, close supervision is required when the composter is used near children. · Do not put fingers or hands into the composter. · Turn the power switch to the off position before attempting to clear a jam or removing an object from the
composter. · When attempting to loosen a jam in the composter, use a long wooden object such as a wooden spoon or a
spatula. · When attempting to remove objects from the composter, use long-handled tongs or pliers. Use non-magnetic
tools only. · To reduce the risk of injury, do not put the following into the composter.
Clam or oyster shells Caustic drain cleaners or similar products Glass, chinaware, or plastic Large whole bones Metal, such as bottle caps, tin cans, or utensils Hot grease or other hot liquids · When not operating the composter, leave the drain cover in place to reduce the risk of objects falling into the composter.
Save these instructions
· Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service technician if you are in doubt as to whether the composter is properly grounded.
· If the plug provided with the composter does not fit the outlet, do not modify the plug or attempt to force the plug into the outlet.
· Use a proper outlet installed by a qualified electrician. · People who lack physical sensation or mental abilities, or those who do not have sufficient experience and
knowledge to use the device safely without supervision or instruction (including children), require caution and should not operate or use the product.
03

Precautions when using the product
Read the following safety information to properly use the product.
Safety symbols in this guide
"Warning" - Indicates a potential hazard which, if not avoided, may result in injury or death.
"Caution" - Indicates a potential hazard which, if not avoided, may result in minor injury or property damage.
"Note" - Provides useful information to help users better utilize the product's features.
Product placement
· Do not place the product in areas where flammable gases are leaking or may potentially leak. Doing so may result in an explosion or electrical fire.
· Place the product away from direct sunlight and heat sources, especially in dry areas. Failure to do so may result in an electric shock or impaired product performance.
· Install the product in a location where the power plug can be easily disconnected from the electrical outlet. Failure to do so may result in an electrical fire or electric shock due to electrical leakage.
· When connecting the power plug to the product, do not tilt the product excessively. Doing so may cause the contents inside to spill out.
· Install the product on a flat surface. Failure to do so may result in vibrations and noises, leading to product malfunction.
· Install the product on a flat and dry location. When using the product, maintain a distance of at least 15 cm (5.9 in) between the back of the product and the wall, and a minimum height clearance of 60 cm (23.6 in) or more from the top of the product. If there is limited space or the product is close to surrounding objects or walls, poor ventilation can hinder the flow of steam and impair the performance of the product.
04

Power supply
· Do not connect the product's power to a power strip with multiple power cords. Doing so may result in an electrical fire or electric shock.
· Do not connect the power plug to loose sockets. Doing so may result in an electrical fire due to overheating. · Do not use the product for purposes other than those specified in the user manual. Doing so may damage the
product or result in injury. · Use only the genuine power cable (AC 230-240V, 50Hz) supplied with the product. Failure to do so may result
in an electrical fire or electric shock. · Do not use a transformer. Doing so may result in an electrical fire or electric shock. · Do not use the product in environments where the voltage, current, frequency, or other conditions deviate
from the rated specifications. Doing so may result in an electrical fire or electric shock. · Do not modify the length of the power plug arbitrarily. Doing so may result in an electrical fire or electric
shock. · If foreign objects, such as dust or water, come into contact with the power plug and power terminals, wipe
them off with a dry cloth. Using the product with foreign objects on the terminals may result in an electrical fire or electric shock. · If the power plug is damaged, do not replace or repair it on your own. To prevent accidents, please contact customer support for a replacement. · Disconnect the power plug from the electrical outlet when not using the product for an extended period of time or during thunder and lightning. Failure to do so may result in an electrical fire due to electrical leakage.
This product is designed for AC 230-240V, 50Hz only. Using a voltage that does not match the specifications may damage the product. Please use a dedicated AC 230-240V, 50Hz outlet with a rated capacity of 15 A or higher.
Usage and care
· Do not touch the power plug with wet hands. Doing so may result in an electric shock. · Do not disconnect the power plug by pulling on the wires with your hands. Doing so may result in an electrical
fire or electric shock. · Do not twist or tie the power plug. Doing so may result in an electrical fire or electric shock. · Prevent the wire from being pinched, twisted, or crushed by the product. Failure to do so may result in an
electrical fire or electric shock. · If you hear any strange sounds, detect unusual odors, or see smoke coming from the product, immediately
disconnect the power plug from the product and contact customer support. Doing so may result in an electrical fire or electric shock. · People who lack physical sensation or mental abilities, or those who do not have sufficient experience and knowledge to use the device safely without supervision or instruction (including children), require caution and should not operate or use the product. · Do not touch the inside of the product immediately after use, as it may be hot. Doing so may cause a burn. · Do not open the lid while the product is in operation. Doing so can cause a burn due to the high temperatures inside the product. · If the product is submerged, disconnect the power plug from the product and contact customer support. Doing so may result in an electrical fire or electric shock. · Be careful not to drop the bucket when carrying it. Doing so may damage the bucket or result in injury. · If water comes into contact with the power terminal of the product, disconnect the power plug from the product and contact customer support. Doing so may result in an electrical fire or electric shock. · Do not put flammable substances, hot water, oil, or any other combustible materials inside the product. Doing so may result in an electrical fire.
05

· Do not open the lid or put your hands inside the bucket while it is operating. Doing so may cause a burn or injury.
· Keep children and pets away from the product and its packaging materials. Damage to the product may result in serious injury to children or pets.
· Disconnect the power plug from the product when cleaning it. Doing so may result in an electrical fire or electric shock.
· Do not spray water or use benzene, thinner, alcohol, acetone, or any other solvents to clean the product. Doing so may result in deterioration of the product's surface, electrical fire, or electric shock.
· Prevent children from leaning on or climbing on the product. Failure to do so may result in serious injury. · Do not exceed the fill line when disposing of food waste. Doing so may damage the product. · When disposing of high-starch, sugary, or fatty foods, mix them with other food items. Processing them alone
may cause clumping and inadequate treatment. · Do not put bones, shellfish shells (such as crab or shrimp), or nutshells in the bucket. Doing so may damage
the product. · Do not put inedible minerals into the bucket. Doing so may damage the product or impair its performance. · Do not forcibly cut off the power while the product is operating. Doing so may result in product malfunction. · Do not store food waste inside the product for an extended period when the power is turned off. The contents
may decay and produce unpleasant odors. · Do not tilt the product excessively when carrying the product. Doing so may cause water to spill inside the
product and result in product malfunction. · Do not subject the bucket to excessive impact. Deformation of the body or handle may damage the product or
impair its performance. · Do not climb on top of the product or place heavy objects on it. Doing so may damage or deform the product. · Do not disassemble or repair the product on your own. Doing so may damage the product or result in product
malfunction. · Do not put in any hard materials such as glass or metal into the product. Doing so may damage the product. · Do not put any non-food waste into the bucket. Doing so may damage the product. · Do not use the product if it is damaged. Doing so may result in injury or property damage. · Do not manually rotate the mixing blades inside the bucket. Doing so may damage the bucket or result in
injury.
· The maximum food waste capacity that can be processed in a single operation is 4 liters (1.05 gal). · If there is a significant temperature difference between the outdoor temperature and the interior of the
product, water may accumulate under the filter, shortening its lifespan. Please use the product indoors.
06

1 Usage and care
1.1 Checking the components
Open the product's box and make sure the following components are included.

Main unit

Bucket *

Filter *

Stainless steel cover

Quick start guide

Drain plug (Filter valve)

Power cable

· The components may be subject to change without prior notice for the purpose of improving the performance or quality of the product.
· The bucket and filter (including activated carbon) are consumable parts.
· The shape of the power cable's plug may vary depending on the region.

1.2 Name and role of each part
1.2.1 Front view
The Operation button is used to start or stop the
product.
The display shows the product's status. The Mode button is used to change between the operating
modes.

The dial is used to lock or unlock the product's lid.
The Open button is used to open the product's lid.
07

1.2.2 Back view 1.2.3 Interior view

The filter vent is used during the discharge of filtered moisture.
The filter is used for dehumidification and odor removal during the processing of food waste.
The filter cover is used to cover up the filter.
The power terminal is used when connecting
the power plug.
The drain outlet is used to discharge the accumulated moisture inside the product.

The fill line indicates the maximum limit for food waste disposal.

The stainless steel cover is used to securely close the product lid.
The bucket is used for storing the food waste for processing.

2 Installation
2.1 Choosing an appropriate location
For proper operation, install the product on a flat, dry surface. When using the product, maintain a distance of at least 15 cm (5.9 in) between the back of the product and the wall, and a minimum height clearance of 60 cm (23.6 in) or more from the top of the product.

60 cm 15 cm

15 cm

Please follow the guidelines below to avoid any degradation in performance or electrical hazards with the product:
· Do not place the product in a location where it can be exposed to rain or high humidity.
· If placing the product on a countertop, avoid using it in areas with low upper cabinets, as moisture may accumulate due to steam.
· Avoid locations with extreme temperature differences and use the product in well-ventilated indoor spaces.
· Install the product on a sturdy, flat surface. If installed on an uneven surface, vibrations and noise may occur, leading to product malfunction.

3 Getting started
Before using the product, please follow the instructions below to prepare the product for usage.
01
Please remove the protective sticker from the bottom surface of the bucket.

1 2
1 2
2 1
10

02
Turn the dial clockwise, and then press the Open button. The lid will open slowly.
Please refer to "4.2 Opening and locking the lid" for detailed instructions on how to open and close the lid of the product.
03
Insert the bucket into the product, ensuring that the bottom and side of the bucket align precisely with the grooves on the main body.
04
Remove the caution label attached to the filter outlet on the top of the product.
05
Open the filter cover on the back of the product and detach the integrated filter from the inside of the product. Remove all the packaging materials attached to the filter.
Please make sure to remove all packaging materials before using the product. Using the product with packaging materials still attached can cause damage to the product.
06
Align the top part of the filter with the back of the product, and press the filter downward to insert it. Then, close the filter cover.
Before using the product, please make sure that the drain outlet at the bottom of the back of the product is covered by the drain plug. Using the product without the drain plug may cause leakage of condensation, posing a risk of electric shock and/or product malfunction.

4 Using the product
Please follow the instructions below to use the product safely.
4.1 Connecting the product to power
With the product on its side, connect the power plug to the power terminal located on the bottom of the product, and then connect the power plug to the power outlet.
This product is for AC 230-240V, 50Hz use only. Using voltage that is not compatible with the capacity may result in a product malfunction.
· Please use a dedicated outlet rated for 15 A or higher. · The shape of the power cable's plug may vary depending on the
region.

4.2 Opening and locking the lid

4.2.1 Opening the lid
1

To open the lid, turn the dial clockwise and then press the Open button. The lid will open slowly.
The product will not operate when the lid is unlocked.

4.2.2 Locking the lid

To lock the lid, rotate the dial counterclockwise while the lid is closed. The lid will lock, and Storage mode will be activated.

4.3 Understanding the display
You can check the operating status of the product through the display located at the top of the appliance.
4.3.1 Standby mode (before food input) When the power is turned on, the display will show the "BLUE VENT" logo, indicating that the product is in Standby mode. The product will also enter Standby mode when the food processing or cleaning process is stopped or after the cleaning process is complete.

Lid Unlocked

Lid Locked

4.3.2 Storage mode
When food waste is deposited into the product, the display will show the pre-processing weight and the current operating mode.

Displays the pre-processing weight

Displays the current operating mode. When in AI mode, it will display "AI Storage Mode", and when it is in Normal mode,
it will display "Storage Mode."

4.3.3 Processing and cleaning progress
During food waste processing, the product's operating status ("AI Drying > AI Grinding > AI Cooling" or "Cleaning") will be shown on the display with the corresponding icons.

4.3.4 Processing completed
After food waste processing is complete, the display will show the weight before and after processing, as well as the total reduced carbon emissions.

It displays the weight before and after processing.

It displays the reduced carbon emissions after processing.

· The display may be subject to change without prior notice to enhance the performance or quality of the product. · A minimum of approximately 300-600g (0.6-1.3lbs) of food waste is needed in the bucket for the product to detect
and display the pre-processing weight.
12

4.4 Guidelines for food waste disposal

4.4.1 Types of food not suitable for disposal
Please only input food waste that falls under the category of organic kitchen waste. The product cannot process materials that are not suitable for consumption by humans or animals.
Do not dispose of the following types of food waste in the product. Instead, dispose of them as regular trash.

Type Fruits Grains Meats
Shellfish
Etc.

Example Hard shells, such as walnuts, chestnuts, peanuts, acorns, etc. Seeds of stone fruits, such as peaches Chaff (outer rice bran), unpopped popcorn kernels The hair or bones of animal products Shells of shellfish, conchs, abalone, sea squirts, oysters, shells of crustaceans, such as crabs and crayfish, and thick fish bones Non-food waste, such as oriental medicine dregs, bottle caps, wooden chopsticks, etc.

You are responsible for service and repair costs of any product damage or failure due to the disposal of inappropriate food waste. Please check the type and condition of the food before processing.

4.4.2 Types of food that require caution
When disposing a large amount of specific types of food waste at once or when inserting solid food waste, the product may be damaged.
Refer to the following table for pre-treatment solutions for certain types of food waste.

Type
Solid fibrous food waste
Sticky food waste
Greasy food waste

Example
Fruit peels (banana, orange, apple, etc.), cabbage, lettuce, dried starches (bread,
cereals, oats and other grains), etc.
Rice, pasta, noodles, sauces and syrups, cheese, mashed potatoes, peanut butter,
butter, cooked potatoes, etc.
Soft bones or skin from meat, fried food, pizza, etc.

Solution To prevent food waste from getting tangled during processing, cut the food waste into approximately 3 cm pieces.
Mix with other food waste before inserting it into the product.

To prevent product damage, make sure to thoroughly wash food waste and remove as much moisture as possible before inserting it into the product. Additionally, for food waste that is not easily decomposable or is hard in texture, it is advisable to cut it into smaller pieces before inserting it into the product.

4.5 Using AI mode

When you connect the product to power, it operates in AI mode (default setting). In AI mode, the product automatically starts processing the stored food waste when it reaches a certain weight. Depending on your usage, you can select between the 2-person AI mode, 3-person AI mode, or 4-person AI mode.
· Press the Mode button ( ) in Standby mode to select the appropriate AI mode for your usage. The modes will change in the following order: 2-person AI mode > 3-person AI mode > 4-person AI mode > Normal mode.
· You can add additional food waste before the product starts processing food waste.

Display

AI mode

Weight

2-person AI mode

3-person AI mode

Base on the usual average amount of food waste per person, it is determined that more than a certain amount of food waste is collected for each mode.

4-person AI mode

1 2

01
Turn the dial clockwise and press the Open button to open the lid.

02
Separate the bucket from the product and place the food waste inside. Please do not exceed the maximum fill line when disposing of food waste. Doing so may damage the product, cause malfunctions, and block the opening mechanism of the lid.
03
Insert the bucket into the product, ensuring that the bottom and side align with the grooves on the main unit. Then, wet the handle of the bucket.
If the handle of the bucket is facing towards the front of the product, you will not be able to close the lid.
04
Close the lid and turn the dial counterclockwise to the lock position. Once the lid is locked, the product will enter AI mode where it will automatically start processing the food waste once the weight is reached.
· When in AI mode, press the Operation button ( ) if you want to process the food waste immediately.
· Once processing starts, the estimated operation time will be shown on the display. Processing time may vary during the cycle as AI performs additional processing depending on the temperature, humidity, and weight.
· If additional processing is needed, the display will show the message "Extra AI Processing," and the product will continue to operate.
· The product will not operate in AI mode when the lid is open.
15

05
After food waste processing is complete, remove the bucket from the product and dispose of the contents.
The interior of the product will be hot after operating. To avoid burns, allow the interior of the product to cool for at least 20 minutes before removing the bucket.
4.6 Using Normal mode
When Normal mode is selected, press the Operation button ( ) to immediately start the food waste processing. When in Stand-by mode, press the Mode button ( ) until you reach Normal mode. The product will provide voice guidance as you toggle between the modes.
When you press the Mode button ( ) in Standby mode, the modes will change in the following order: 2- person AI mode > 3-person AI mode > 4-person AI mode > Normal mode.
16

4.7 Using Green mode
When using Green Mode, food waste is processed at a low temperature, resulting in compost that can be used as fertilizer for your plants. After processing is complete, store the compost separately and use it as fertilizer in places such as your backyard garden.
· To generate high-quality compost from food waste, only insert uncooked food waste. · Choose food waste with low moisture, salt, and oil content. · Keep in mind that when Green Mode is activated, the food waste is processed at a low temperature, which
may result in longer processing times. · To use the processed compost as fertilizer, it is recommended to mix it with natural soil.
01
Place the food waste into the bucket.
Please do not exceed the maximum fill line when disposing of food waste. Doing so may damage the product, cause malfunctions, and block the opening mechanism of the lid.

02
After closing the lid, turn the dial counterclockwise to the lock position. Once the lid is locked, the product will enter Storage mode.
The product will not operate in Storage mode when the lid is open.

03
To enter Green Mode, press and hold the Operation button ( than 3 seconds while the product is in Standby mode.

) for more

When you press and hold the Operation button ( ) for more than 3 seconds in Standby mode, the modes will change in the following order: AI mode/Normal mode > Green mode > Cleaning mode.

04
Press the Operation button ( ) to enter Green mode.
05
After food waste processing is complete, remove the bucket from the product and store the compost separately and use it as fertilizer in places such as your backyard garden. It is recommended to mix it with natural soil.
The interior of the product will be hot after operating. To avoid burns, allow the interior of the product to cool for at least 20 minutes before removing the bucket.
17

4.8 Using Cleaning mode
When food waste is stuck or becomes too difficult to clean with water, use Cleaning mode to thoroughly clean the bucket.
To manually clean the bucket, soak the bucket in hot water mixed with a neutral detergent to loosen dried food particles. After, use a soft sponge or cloth to gently wipe it clean. Avoid using abrasive materials like scouring pads, as they can damage the coating of the bucket.
01
Fill the bucket halfway with water.

02
Close the lid and turn the dial counterclockwise to the lock position.

03
To enter Cleaning mode, press and hold the Operation button ( more seconds while in Standby mode.

) for 3 or

When you press and hold the Operation button ( ) for 3 or more seconds in Standby mode, the modes will change in the following order: AI mode/Normal mode > Green mode > Cleaning mode.

04
Press the Operation button ( with voice guidance.

) to start cleaning. The cleaning will begin

When the product starts the cleaning process, the estimated operating time will be shown on the display. Please note the actual operating time may differ from the estimated time.

05
After the cleaning is complete, open the lid and dispose of the cleaning water.
The interior of the product will be hot after operating. To avoid burns, allow the interior of the product to cool for at least 20 minutes before removing the bucket.

4.9 Useful features
4.9.1 Turning the voice guidance function on and off
When you supply power to the appliance, the voice guidance function will turn on by default. To turn off voice guidance, press and hold the Mode button ( ) for 4 or more seconds while in Standby mode. You will hear the voice guidance saying "Voice guidance disabled" and see the voice guidance OFF icon ( ), and the appliance may provide corresponding sound effects depending on its status.
To turn on the voice guidance function, press and hold the Mode button ( ) for 4 or more seconds while in Standby mode. You will hear the voice guidance saying "Voice guidance enabled" and see the voice guidance ON icon ( ), and the appliance may provide voice guidance depending on its status.
If the following voice guidance occurs during use, please check the status of the product.

Voice Guidance
The bucket is not installed. Please check.
No food waste detected. Please check the bucket.

Problem
Bucket detection abnormality

Troubleshooting
When the bucket is not properly attached to the product, a voice guidance message will play. Please check the status of the bucket on the product.

Food waste detection abnormality

When there is little to no food waste in the bucket, a voice guidance message will play. Please check the presence of food waste in the bucket.

4.9.2 Using the empty bucket/empty food detection feature
You can check the status of the bucket by pressing the Operation button ( ) while in Standby mode. If the bucket is not attached or if there is no food waste inside the bucket, you will receive a voice guidance message. Follow the voice guidance and reinsert the bucket or check if food waste is inside the bucket.
4.9.3 Understanding the power saving feature
When processing is complete, the product will automatically shut down and enter Standby mode with very low power consumption.

5 Troubleshooting

If an issue occurs with the product, a Check Code will be displayed on the screen, and a voice guidance message will play. Please refer to the following table to determine the appropriate troubleshooting steps for each Check Code.
· When a Check Code occurs, the voice guidance will repeat each time you press the Operation button ( ). · If a Check Code with a number other than those mentioned in the following table occurs, please contact
customer support at www.bluevent.co.kr/info/global.php. Write down the Check Code and provide it to the agent during the call to expedite the troubleshooting process.

Check Code

Problem

Troubleshooting

Motor overload

When there is hardened or clumped food waste inside the bucket, this message will be displayed. Please check the bucket and remove any remaining residue.

Impeller blockage detected

When there is non-food waste detected inside the bucket, this message will be displayed. Please check the bucket for any non-food waste and remove it if necessary.

Water overflow detected

When moisture accumulates at the bottom of the filter during food waste processing, this message will be displayed. Please detach the drain plug located at the bottom of the back of the product and remove the moisture.

· To reset the Check Code after performing the troubleshooting steps, press and hold the Mode button ( ) for 4 or more seconds, or disconnect the power cord from the outlet and reconnect it after 10 seconds. The product will reset and should operate normally after.
· If the Check Code continues to appear even after resetting the product, please contact customer support at www.bluevent.co.kr/info/global.php. Additionally, remove any remaining food waste inside the product before requesting assistance.

6 Product care and maintenance
To maintain the optimal performance of the product, regularly replace the activated carbon inside the filter and clean the stainless steel cover.
6.1 Replacing the activated carbon
To maintain the optimal performance of the product, it is recommended to regularly replace the activated carbon inside the filter. The replacement interval for the activated carbon is generally every 2 to 3 months, based on an average usage of two times per week. However, the replacement frequency may vary depending on the type and quantity of food waste processed.
To purchase replacement filters, scan the QR code on the label attached to the side of the product using your smartphone.
01
Turn off the power of the product before removing the cover located on the back of the product. Once the cover is removed, you can remove the filter.
1 2
02
Insert your fingers into the slots located on the sides of the filter lid and open the filter lid.
21

03
Dispose of the filter's activated carbon in the garbage. Used activated carbon is considered general waste.
04
After removing the packaging film and label seal from the replacement filter box, remove the top of the box along the perforated line.
05
Place the filter case upside down on top of the replacement filter box and push it down completely until it is securely attached.
22

06
After flipping the combined filter back over, gently shake it from side to side to prevent the activated carbon layer from mixing. Then, pull up on the box and fill the filter with activated carbon.

· Gently shake the box to prevent the activated carbon from spilling.

· The activated carbon is layered for optimal deodorizing

effectiveness. When flipping the filter, be careful not to mix the

layers of activated carbon.

07
Close the filter lid.

08
Align the top of the filter with the back of the product and press the filter downward to insert it. Then, close the filter cover.
2 1
23

6.2 Cleaning the stainless steel cover
During food waste processing, residue may accumulate on the stainless steel cover. To maintain product cleanliness, it is recommended to regularly check and clean the stainless steel cover.
01
After turning the dial clockwise, press the Open button to unlock the lid and open it.
1
2
02
Hold the knob of the stainless steel cover and pull it towards you to detach it from the lid.
The interior of the product will be hot after operating. To avoid burns, allow the interior of the product to cool for at least 20 minutes before removing the cover.
03
Please use warm water and a neutral detergent to clean the stainless steel cover. Be sure to use a soft cloth or sponge to avoid scratching the surface.
Avoid using abrasive materials like scouring pads, as they can damage the coating of the cover.
04
Align the thoroughly dried stainless steel cover with the cover groove on the lid and firmly attach it to the lid to ensure a secure fit.
24

7 Product FAQs
Please refer to the following table for answers to frequently asked questions about the product.

7.1 Power and electrical usage

Q.
Do I need to keep the power on continuously?

A.
· It is recommended to keep the power on for the use of AI Storage Mode/Storage Mode. AI Storage Mode/Storage Mode is a function designed to prevent food waste from spoiling and to remove odors inside the bucket.
· When using AI Storage Mode/Storage Mode, the electricity consumption is approximately 2 kWh per month.

7.2 Product usage

Q.
What is the food waste processing capacity?

A. It can process up to 4 liters (1.05 gallons) of food waste at a time.
Please do not exceed the maximum fill line when disposing of food waste. Doing so may damage the product.

Is it normal for steam to be generated during product usage?

· When food waste is dried out, it can generate steam. This is a normal phenomenon. The steam will gradually dissipate over time.
· Steam can be generated due to the difference in temperature between the air coming out of the filter and the external air.
· If there is limited space or is close to surrounding objects or walls, poor ventilation can hinder the flow of steam and impair the performance of the product.
· Ensure that there is sufficient space around the product for proper steam discharge. For more details, please refer to "2.1 Choosing an appropriate location."

Why is the compost not a powder?

· The end result of the compost can vary depending on the type of food waste that was input. Fish and cooked vegetables: Fine powder form Raw vegetables: Small cereal like particles
· Starchy foods, such as rice or dough, can be discharged in clumps the size of red beans.

How should the processed waste be disposed of?

According to current regulations, dried processed waste is classified as food waste. Please dispose of the dried waste in a food waste bag or collection bin. The volume of the waste will be significantly reduced compared to before processing. Also, there will be no foul odor. It is recommended to have a separate storage container to collect the waste and dispose of it all at once.

To request product aftersales service, what should I do?

To request product after-sales service, please contact our customer support at www.bluevent.co.kr/info/global.php. Additionally, remove any remaining food waste inside the product before requesting assistance.

8 Specifications

Please refer to the following table to check the specifications of the product.

Item Product name Brand name Model name Rated voltage Power consumption Processing method Reduction rate Installation method Deodorization method
Processing capacity
Weight
Dimensions

Specifications Smart food composter
BLUE VENT FG-ADM240E, FG-ADM240EA
AC 230-240V, 50Hz 810-880W
Dry crushing Up to 95%
Freestanding Composite deodorization filter
Maximum 4L (1.05gal) 26lbs (11.8kg)
320 X 450 X 383.7mm

Product Warranty
The bucket and filter (including activated carbon) are consumable parts.
Thank you very much for purchasing a BLUE VENT product. To receive customer support, please provide the product warranty certificate indicating the purchase date.

Model Name Date of purchase Place of purchase

Name Address Phone Number

Thinkware Mobile provides a warranty for the product in accordance with the Consumer Protection Act and the standards for consumer dispute resolution (Federal Trade Commission Act).
Thinkware Mobile is not responsible for repair, replacement, or refund in cases where the product has been returned without a malfunction.
Thinkware Mobile only provides normal service on genuine products. (Service cannot be provided on non-genuine products).

Product exchanges will be made for the same type of item. If an exchange for the exact same product is not possible, a similar product will be provided.
This product warranty certificate and the product's serial number will not be reissued, so please store them safely.
The warranty period for the product begins on the date of purchase, be sure to have your invoice/receipt at the time of purchase ready when requesting for customer support.

Warranty Policy
Thinkware Mobile provides a warranty to the original purchaser for the following period from your date of purchase against deficiencies in material and workmanship under normal use. Should this unit fail to operate in a satisfactory manner within the warranty period, Thinkware Mobile will replace or repair the product at its discretion. We may use functionally equivalent, similar (if model is discontinued or out of stock), reconditioned, refurbished, remanufactured, pre-owned or new products or parts.
Main Smart Food Composter unit in box: 12 months
The smart food composter unit's warranty is tracked via the original purchase receipt. Shipping fees for returned items back to the seller, including warranty items, are the responsibility of the customer. All returns and warranty shipments must include a tracking number as we are not responsible for damaged or lost returns.
If service is required: Should this unit fail to operate in a satisfactory manner, it is best to first check with the store where it was originally purchased. Should this fail to resolve the matter and if you believe your unit meets the criteria for warranty exchange or repair, please visit www.bluevent.co.kr/info/global.php or scan the QR code to check the customer service center information for the country of purchase, and then contact us.
This limited warranty does not cover: 1. Devices was not purchased from an authorized Thinkware Mobile retailer. 2. Device malfunctions due to the normal wear and tear, misuse, lack of maintenance, accidents, modification,
alteration or repairs by an unauthorized person or entity. 3. Ducts that are operated in combination with ancillary and/or peripheral equipment not furnished or otherwise
certified by Thinkware Mobile for use with the product or any damage to the product or ancillary and/or peripheral equipment as a result of such use.
www.bluevent.co.kr/info/global.php

Ver. 1.0 (May. 2024)

References

bluevent.co.kr/info/global.php

Adobe InDesign 15.0 (Windows) Adobe PDF Library 15.0