Manuals+

FCC Part15.247 & IC Test Setup Photographs

This document details the test setup configurations for FCC Part15.247 and IC compliance testing, specifically for the Cypress Semiconductor 3053 EZ-BT Module.

Conducted Emission Test Setup

Description: Conducted emission Test Setup. This configuration is used to measure electromagnetic interference that is conducted back onto the power lines of the equipment under test.

Radiated Emission Test Setup for Below 1GHz

Description: Radiated Emission Test Setup for Below 1GHz. This setup is employed for measuring radiated emissions in the frequency range from 30 MHz to 1 GHz. It typically involves positioning the device and antennas within a controlled environment like an anechoic chamber.

Radiated Emission Test Setup for 1~18GHz

Description: Radiated Emission Test Setup for 1~18GHz. This configuration is used for radiated emission measurements in the frequency range of 1 GHz to 18 GHz, utilizing appropriate antennas and test chamber conditions.

Radiated Emission Test Setup for Above 18GHz

Description: Radiated Emission Test Setup for Above 18GHz. This setup is designed for measuring radiated emissions at frequencies above 18 GHz, requiring specialized equipment and test environments to capture higher frequency signals.

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=4398980 Acrobat Distiller 9.0.0 (Windows)

Related Documents

Preview CE Declaration of Conformity for EZ-BLE PRoC Module
This document contains the CE Declaration of Conformity for the EZ-BLE PRoC Module (Model Number: CYBLE-022001-00) by Cypress Semiconductor, confirming compliance with the Radio Equipment Directive (2014/53/EU).
Preview Cypress Semiconductor VIC068A & VAC068A User's Guide - VMEbus Controllers
Comprehensive user's guide for Cypress Semiconductor's VIC068A VMEbus Interface Controller and VAC068A VMEbus Address Controller, detailing features, operations, and specifications for hardware and software designers.
Preview Cypress EZ-USB FX3 SDK EZ-USB Suite User Guide v1.3.3
Explore the Cypress EZ-USB FX3 SDK with this user guide. Learn to use the EZ-USB Suite IDE for firmware development, project creation, JTAG debugging with Segger J-Link and OpenOCD, and CX3 configuration for MIPI CSI-2 interfaces. Essential for embedded developers working with Cypress microcontrollers.
Preview PSoC 4 CapSense Design Guide: Enabling Advanced Capacitive Touch Sensing
This comprehensive design guide from Cypress Semiconductor provides in-depth information on implementing capacitive touch sensing applications using the CapSense feature within the PSoC® 4 and PRoC™ BLE device families. It details the technology, design considerations, performance tuning, and development tools necessary for creating advanced touch interfaces.
Preview CY8CMBR2110 CapSense® Design Guide
This design guide from Cypress Semiconductor provides comprehensive details on implementing capacitive touch sensing functionality using the CY8CMBR2110 CapSense Express device, covering its features, technical specifications, schematic design, configuration, and low-power considerations.
Preview PSoC 3 and PSoC 5 SFF-8485 Serial GPIO (SGPIO) Initiator Interface Guide
This application note details how to use the SGPIO Initiator component with PSoC 3 and PSoC 5 microcontrollers to implement the SFF-8485 Serial Attached SCSI (SAS) and Serial ATA (SATA) industry standard for serial GPIO communication in hard drive enclosure systems.
Preview Cypress ADC_SAR Component Datasheet: Successive Approximation Register
Comprehensive datasheet for the Cypress Semiconductor ADC_SAR component, a 12-bit, 1 Msps Successive Approximation Register Analog-to-Digital Converter for PSoC Creator. Details features, configuration options, API functions, and typical applications.
Preview Getting Started with CapSense® Technology | Cypress Semiconductor
A comprehensive guide from Cypress Semiconductor on getting started with CapSense® capacitive touch sensing technology, covering design considerations, product portfolio, and best practices for implementation.