Installing the Litter-Robot 4 Carpet Tray

How to Install

1. Step 1: Place the Carpet Tray

   Place the carpet tray on the floor in the desired location for the Litter-Robot 4. The smooth side of the carpet tray should be facing up, and the protruding end should be located where the rear of the Litter-Robot will sit. (Visual description: Two images side-by-side. The first image shows the black, oval-shaped carpet tray placed correctly on a patterned rug with its smooth side facing up, indicated by a checkmark. The second image shows the carpet tray placed incorrectly with its textured, grid-like underside facing up, indicated by an 'X'.)

2. Step 2: Position the Litter-Robot

   Set the Litter-Robot onto the carpet tray. Lift the unit under the rear base and front bezel for proper placement. (Visual description: An image showing the white Litter-Robot 4 being carefully lowered onto the black carpet tray, which is on a patterned rug. An orange line points to the 'Bezel' area on the front of the Litter-Robot, indicating a lifting point.)

3. Step 3: Ensure Stability

   Ensure all four feet of the Litter-Robot rest firmly on the carpet tray. If any of the four feet hang over the edge of the carpet tray, the Litter-Robot will become unstable. (Visual description: A close-up image showing the base of the white Litter-Robot 4 resting securely on the black carpet tray, which is on a patterned rug. The feet of the Litter-Robot are clearly within the boundaries of the tray.)

4. Step 4: Reset Weight Sensors

   Press the Reset ⟳ button on the Litter-Robot to reset the weight sensors. (Visual description: An image showing a hand pressing the circular Reset button on the control panel of the black Litter-Robot 4. The control panel has several buttons arranged vertically.)