Owner's Manual for LEVITON models including: ODSMT-MDx Smart Multi Tech Wallbox Sensor, ODSMT-MDx, Smart Multi Tech Wallbox Sensor, Multi Tech Wallbox Sensor, Wallbox Sensor, Wallbox Sensor
Smart Sensor - Occupancy Sensor - Vacancy Sensor - ODSMT-MDW | Products
File Info : application/pdf, 4 Pages, 314.74KB
DocumentDocumentProduct Data ODSMT-MDx Smart Multi-Tech Wallbox Sensor PIR Lens & Nightlight Microphonics Program by Pressing Button (per install instructions) Photocell & LED Locator Light ON/OFF Button Description The Leviton Smart 0-10V Wallbox Sensor (ODSMT-MDx) uses Passive Infrared (PIR) detection and Microphonics technology to monitor a room for occupancy. The PIR sensor uses a specialized segmented and tamper resistant lens that divides the field-ofview into sensor zones. When a person passes in or out of a sensor zone, the sensor detects motion and switches the lights ON. The lights will remain ON as long as an occupant moves through the sensor zones and will turn off when space becomes vacant and after the timeout expires. ODSMT also utilizes Mircrophonic technology that "listens" for human activity in the space and will keep the lights ON when motion is detected. Microphonics does not require a direct line of sight and can pick up human activity behind obstructions that PIR-only devices are unable to detect. The ODSMT features a vacancy mode for manual-ON/auto-OFF operation, ideal for installations where manual-ON switching is required for energy code applications. A "minor motion" zone detects small body movements. This detection allows the lights to remain ON when individuals in the space are more stationary. The "major motion" zone exhibits a lesser degree of sensitivity requiring larger movements. Configuration of the ODSMT is made using the Leviton Smart Sensor App from a smartphone or other Bluetooth®-enabled Android or iOS device. Simple configuration can also be applied using pushbutton setup for several popular pre-configured options. The ODSMT integrates a photocell for daylighting holdOFF which can be programmed using the Leviton Smart Sensor App. Applications · Office · Small Lobbies · Meeting Rooms · Bathrooms/Restrooms · Conference Rooms Features · Can be used to comply with ASHRAE 90.1, IECC and 2022 Title 24, Part 6 occupancy/vacancy sensing, switching, and manual-ON/auto-OFF requirements · Fits in a standard wallbox and gangable with other units · Controls General Purpose plug loads up to 20A and LED lighting loads up to 10A · One relay module for single-level switching · 180° field-of-view provides approximately 1,100 square feet of coverage · Latest PIR technology accurately detects minor motion up to 400sq ft and major motion up to 1,100 sq ft · Maximum sensing distance in front of the sensor is 30-40 feet and 15-20 feet on either side · Microphonics technology able to detect minor human activity and does not require direct line-of-sight · Integrated photocell for daylighting hold-OFF · Tamper resistant PIR lens · Use the Leviton Push to Pair (P2P) process to create a multi-way system for up to 5 devices · Antimicrobial treated faceplate and wallplate available · Advanced configuration can be performed using the Leviton Smart Sensor App on any Bluetooth-enabled Android or iOS device: · Set the operating mode for Occupancy (Auto-ON/Auto- OFF) or Vacancy (manual-ON/auto-OFF) · Adjust sensitivity and timeouts · Enable the integrated photocell for daylighting hold-OFF and select target daylighting hold-OFF levels · Create custom templates for easy multi-room replication of sensor settings · Activate the nightlight and select nightlight color · Set a security code to lock configuration settings · Out-of-the-box configuration default mode: · Auto-ON/Auto-OFF with 20-minute timeout · Sensitivity set to 75% · Nightlight and daylighting disabled Leviton Manufacturing Co., Inc. Lighting & Controls 201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 tech line (8:00AM-10:00PM ET Mon-Fri, 9:00AM-7:00PM ET Sat, 9:00AM-5:00PM ET Sun 800-824-3005 ©2023 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice. Features (continued) · Convenient pushbutton hold configuration for installers without a smart device*: Pushbutton Hold Configuration Operating PIR Microphonics Time Out Button (#) Mode Sensitivity (%) Sensitivity (%) (mins) 1 2 75 3 Auto-ON/ 4 Auto-OFF 20 75 10 OFF 50 5 75 20 100 6 100 7 8 75 9 Manual-ON/ 75 10 OFF 10 Auto-OFF 50 20 11 75 100 12 100 *Requires removal of front face cover Wiring Diagram--ODSMT-MDx Line Neutral Black White Blue Black Green Ground Dimensions Diagrams 2.12" (53.95 mm) 1.27" (32.18 mm) 4.13" (104.9 mm) 2.61" (66.22 mm) Front View 1.86" (47.25 mm) 1.42" (36.22 mm) Field of View Diagram 15-20 FT 10 FT 0 10 FT 15-20 FT 20 FT Horizontal Beam Diagram 30-40 FT Major motion coverage 1100ft^2 (102m^2) Minor motion coverage 400ft^2 (37.2m^2) 40-48 IN 20 FT Vertical Beam Diagram 30-40 FT Side View Top View 0.16" (4.21 mm) Product Data ODSMT-MDx Specifications Electrical Input Voltage/Frequency 120-277VAC 120VAC Input Current 120V 277V Load Ratings General Purpose @ 120V General Purpose @ 277V* LED/Electronic Ballast @ 120V LED/Electronic Ballast @ 277V* Standard Ballast @ 120V Standard Ballast @ 277V Tungsten @ 120V Tungsten @ 277V Motor @ 120V Motor @ 277V IP Rating Network Connections Environmental Operating Temperature Storage Temperature Physical Dimensions Other Energy Codes Listings Certifications Warranty 50/60Hz 60Hz Standby: 0.2W; Max: 0.5W+Load Current Standby: 0.3W; Max: 0.6W+Load Current 20A 10A 6.67A 1/4HP (FLA 5.8A) 1/3HP (FLA 3.0A) IP20 BLE 4.2, BLE 5.0 32 to 104°F (0 to 40°C) -40 to 185°F (-40 to 85°C) 4.13" x 2.12" x 1.86" (104.90mm x 53.95mm x 47.25mm) Can be used to comply with ASHRAE 90.1, IECC and 2022 Title 24, Part 6 occupancy/ vacancy sensing, and manual-ON/auto-OFF requirements IECC, UL and cUL listed; JIS Z 2801:2000 FCC, ICC Limited five-year warranty Leviton Manufacturing Co., Inc. Lighting & Controls 201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 tech line (8:00AM-10:00PM ET Mon-Fri, 9:00AM-7:00PM ET Sat, 9:00AM-5:00PM ET Sun 800-824-3005 ©2023 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice. Product Data ODSMT-MDx Ordering Information Smart Wallbox Sensors Cat. No. ODSMT-MDW ODSMT-MDI ODSKT-00E ODSKT-00R ODSKT-00G ODSKT-00I ODSKT-00T ODSKT-00W Note: Wallplate sold separately. Description Smart Multi-Tech Wallbox Sensor, App configurable; Auto-ON/Auto-OFF or manual-ON/auto-OFF, neutral wire required, 120-277VAC, 50/60Hz; White Smart Multi-Tech Wallbox Sensor, App configurable; Auto-ON/Auto-OFF or manual-ON/auto-OFF, neutral wire required, 120-277VAC, 50/60Hz; Ivory Smart Switching Wallbox Sensor Color Change Kit, Black Smart Switching Wallbox Sensor Color Change Kit, Red Smart Switching Wallbox Sensor Color Change Kit, Gray Smart Switching Wallbox Sensor Color Change Kit, Ivory Smart Switching Wallbox Sensor Color Change Kit, Light Almond Smart Switching Wallbox Sensor Color Change Kit, White Leviton Manufacturing Co., Inc. Lighting & Controls 10385 SW Avery St, Tualatin, OR 97062 tel 800-736-6682 tech line (6:00AM-4:00PM PT Mon-Fri) 800-959-6004 Leviton Manufacturing Co., Inc. Global Headquarters 201 North Service Road, Melville, NY 11747-3138 tel 800-323-8920 tech line (8:00AM-10:00PM ET Mon-Fri, 9:00AM-7:00PM ET Sat, 9:00AM-5:00PM ET Sun 800-824-3005 Visit our Website at: www.leviton.com/smartsensors ©2023 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice. LES-G-10664/L23-mm