Instruction Manual for Torin models including: ATBD134 Tool Chest And Cabinet, ATBD134, Tool Chest And Cabinet, Chest And Cabinet, Cabinet
BIG RED 3 Drawer Tool Chest – Torin Jacks
Tool Chest and Cabinet Assembly Instructions Install each caster at the 1.bottom of the tool chest with four screws and nuts as shown in the picture. Hanger Hooks fit into holes 2.inside of the cabinet door. Attach handle/cord holder 3.to side of cabinet.Use screws washers and nuts as shown in the picture. There are four shelf 5.positions inside cabinet.Choose the position height you prefer and place one side of shelf in tabs with other side of shelf hold slightly lower.Raise other side of shelf to just above tabs in opposite side and push down onto tabs.Make sure all tabs are secure. If caster assembly fits loose,using a screwdriver.Make only slight adjustments until caster fits properly. Automatic Drawer Lock: 4.Tool chest drawers will not open until cover is lifted up.They also will not lock in if you push them in when the cover is closed.Always lift cover,then push drawers in.When the cover is closed, the drawer will automatically lock in place. Parts List Description Qty Description Qty Cross M6x12 bolt 4 Handle 1 Spring washer6 16 Flat mat6 16 M6x12 bolt 16 Caster 2 M6 nut 16 Caster with brake 2 Hook 6 Top EVA 1Microsoft Office Word 2007